[ 2675.721691] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2675.721696] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2675.721706] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2675.721711] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2675.734995] PM: Some devices failed to suspend
[ 2675.735392] qpnp_chg_resume: DEBUG_____chg_resume
[ 2675.735734] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2675.738043] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2675.738093] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2675.738218] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2675.738508] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2675.738511] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2675.738514] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2675.738518] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2675.751375] [Touch] mxt_resume 
[ 2675.763040] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2675.763044] mdss_dsi_event_handler: unhandled event=8
[ 2675.763047] mdss_dsi_event_handler-:event=8, rc=0
[ 2675.763727] tspdrv: !  tspdrv: resume.
[ 2675.872369] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2675.872504] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2675.872540] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2675.872651] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2676.004031] PM: resume of devices complete after 269.012 msecs
[ 2676.041609] pn544:IRQ GPIO = 0
[ 2676.009691] Restarting tasks ... done.
[ 2676.057967] PM: suspend exit 2017-02-06 18:19:05.034838743 UTC
[ 2676.159257] PM: suspend entry 2017-02-06 18:19:05.136127963 UTC
[ 2676.159271] PM: Syncing filesystems ... done.
[ 2676.162708] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2676.191906] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2676.195001] Suspending console(s) (use no_console_suspend to debug)
[ 2676.210627] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2676.210668] mdss_dsi_event_handler+:event=7
[ 2676.210675] mdss_dsi_event_handler: unhandled event=7
[ 2676.210681] mdss_dsi_event_handler-:event=7, rc=0
[ 2676.210696] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2676.212723] [apds9130_suspend] Enter
[ 2676.212724] [Touch] mxt_suspend 
[ 2676.212766] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2676.212771] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2676.212777] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2676.212787] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2676.215030] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2676.215043] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2676.215055] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2676.215073] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2676.215083] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2676.227058] PM: Some devices failed to suspend
[ 2676.227751] qpnp_chg_resume: DEBUG_____chg_resume
[ 2676.228110] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2676.232763] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2676.233040] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2676.233459] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2676.233983] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2676.233988] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2676.233994] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2676.234002] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2676.245400] [Touch] mxt_resume 
[ 2676.256692] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2676.256700] mdss_dsi_event_handler: unhandled event=8
[ 2676.256706] mdss_dsi_event_handler-:event=8, rc=0
[ 2676.261371] tspdrv: !  tspdrv: resume.
[ 2676.495363] PM: resume of devices complete after 268.276 msecs
[ 2676.532579] pn544:IRQ GPIO = 0
[ 2676.500737] Restarting tasks ... done.
[ 2676.548433] PM: suspend exit 2017-02-06 18:19:05.525289005 UTC
[ 2676.650031] PM: suspend entry 2017-02-06 18:19:05.626882963 UTC
[ 2676.650064] PM: Syncing filesystems ... done.
[ 2676.661932] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2676.719102] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2676.721170] Suspending console(s) (use no_console_suspend to debug)
[ 2676.730117] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2676.730138] mdss_dsi_event_handler+:event=7
[ 2676.730142] mdss_dsi_event_handler: unhandled event=7
[ 2676.730144] mdss_dsi_event_handler-:event=7, rc=0
[ 2676.730152] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2676.731417] [apds9130_suspend] Enter
[ 2676.731418] [Touch] mxt_suspend 
[ 2676.731439] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2676.731442] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2676.731445] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2676.731450] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2676.732589] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2676.732596] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2676.732601] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2676.732611] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2676.732616] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2676.746243] PM: Some devices failed to suspend
[ 2676.746523] qpnp_chg_resume: DEBUG_____chg_resume
[ 2676.746605] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2676.749474] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2676.749524] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2676.749650] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2676.749939] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2676.749943] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2676.749946] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2676.749950] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2676.762748] [Touch] mxt_resume 
[ 2676.773713] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2676.773718] mdss_dsi_event_handler: unhandled event=8
[ 2676.773721] mdss_dsi_event_handler-:event=8, rc=0
[ 2676.774401] tspdrv: !  tspdrv: resume.
[ 2677.013421] PM: resume of devices complete after 267.153 msecs
[ 2677.050716] pn544:IRQ GPIO = 0
[ 2677.018912] Restarting tasks ... done.
[ 2677.064912] PM: suspend exit 2017-02-06 18:19:06.041761660 UTC
[ 2677.167634] PM: suspend entry 2017-02-06 18:19:06.144504525 UTC
[ 2677.167647] PM: Syncing filesystems ... done.
[ 2677.171077] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2677.218654] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2677.223297] Suspending console(s) (use no_console_suspend to debug)
[ 2677.235367] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2677.235386] mdss_dsi_event_handler+:event=7
[ 2677.235390] mdss_dsi_event_handler: unhandled event=7
[ 2677.235393] mdss_dsi_event_handler-:event=7, rc=0
[ 2677.235401] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2677.236669] [apds9130_suspend] Enter
[ 2677.236669] [Touch] mxt_suspend 
[ 2677.236691] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2677.236694] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2677.236696] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2677.236702] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2677.237861] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2677.237867] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2677.237873] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2677.237882] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2677.237887] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2677.251328] PM: Some devices failed to suspend
[ 2677.251727] qpnp_chg_resume: DEBUG_____chg_resume
[ 2677.252070] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2677.254378] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2677.254428] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2677.254554] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2677.254850] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2677.254853] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2677.254856] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2677.254860] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2677.267639] [Touch] mxt_resume 
[ 2677.276052] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2677.276173] mdss_dsi_event_handler: unhandled event=8
[ 2677.276177] mdss_dsi_event_handler-:event=8, rc=0
[ 2677.279260] tspdrv: !  tspdrv: resume.
[ 2677.372278] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2677.372363] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2677.372382] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2677.372445] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2677.513198] PM: resume of devices complete after 261.846 msecs
[ 2677.550520] pn544:IRQ GPIO = 0
[ 2677.518687] Restarting tasks ... done.
[ 2677.566376] PM: suspend exit 2017-02-06 18:19:06.543227284 UTC
[ 2677.667890] PM: suspend entry 2017-02-06 18:19:06.644761087 UTC
[ 2677.667904] PM: Syncing filesystems ... done.
[ 2677.681555] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2677.735226] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2677.737299] Suspending console(s) (use no_console_suspend to debug)
[ 2677.746189] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2677.746209] mdss_dsi_event_handler+:event=7
[ 2677.746213] mdss_dsi_event_handler: unhandled event=7
[ 2677.746216] mdss_dsi_event_handler-:event=7, rc=0
[ 2677.746224] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2677.747487] [apds9130_suspend] Enter
[ 2677.747488] [Touch] mxt_suspend 
[ 2677.747509] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2677.747512] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2677.747515] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2677.747520] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2677.748675] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2677.748682] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2677.748687] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2677.748696] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2677.748701] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2677.762155] PM: Some devices failed to suspend
[ 2677.762545] qpnp_chg_resume: DEBUG_____chg_resume
[ 2677.762764] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2677.765211] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2677.765260] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2677.765384] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2677.765671] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2677.765674] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2677.765677] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2677.765681] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2677.778471] [Touch] mxt_resume 
[ 2677.789035] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2677.789039] mdss_dsi_event_handler: unhandled event=8
[ 2677.789042] mdss_dsi_event_handler-:event=8, rc=0
[ 2677.789710] tspdrv: !  tspdrv: resume.
[ 2678.026191] PM: resume of devices complete after 264.008 msecs
[ 2678.063322] pn544:IRQ GPIO = 0
[ 2678.031573] Restarting tasks ... done.
[ 2678.078601] PM: suspend exit 2017-02-06 18:19:07.055473587 UTC
[ 2678.179890] PM: suspend entry 2017-02-06 18:19:07.156760149 UTC
[ 2678.179903] PM: Syncing filesystems ... done.
[ 2678.183337] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2678.214629] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2678.217746] Suspending console(s) (use no_console_suspend to debug)
[ 2678.233394] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2678.233433] mdss_dsi_event_handler+:event=7
[ 2678.233440] mdss_dsi_event_handler: unhandled event=7
[ 2678.233447] mdss_dsi_event_handler-:event=7, rc=0
[ 2678.233461] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2678.235508] [apds9130_suspend] Enter
[ 2678.235509] [Touch] mxt_suspend 
[ 2678.235551] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2678.235556] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2678.235562] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2678.235573] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2678.237768] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2678.237782] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2678.237793] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2678.237811] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2678.237822] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2678.250462] PM: Some devices failed to suspend
[ 2678.251187] qpnp_chg_resume: DEBUG_____chg_resume
[ 2678.251552] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2678.256176] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2678.256456] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2678.256882] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2678.257420] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2678.257426] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2678.257432] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2678.257440] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2678.272217] [Touch] mxt_resume 
[ 2678.284548] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2678.284557] mdss_dsi_event_handler: unhandled event=8
[ 2678.284563] mdss_dsi_event_handler-:event=8, rc=0
[ 2678.287518] tspdrv: !  tspdrv: resume.
[ 2678.524021] PM: resume of devices complete after 273.531 msecs
[ 2678.561822] pn544:IRQ GPIO = 0
[ 2678.529584] Restarting tasks ... done.
[ 2678.578189] PM: suspend exit 2017-02-06 18:19:07.555041087 UTC
[ 2678.679819] PM: suspend entry 2017-02-06 18:19:07.656689422 UTC
[ 2678.679832] PM: Syncing filesystems ... done.
[ 2678.683262] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2678.714558] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2678.717666] Suspending console(s) (use no_console_suspend to debug)
[ 2678.733300] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2678.733340] mdss_dsi_event_handler+:event=7
[ 2678.733348] mdss_dsi_event_handler: unhandled event=7
[ 2678.733354] mdss_dsi_event_handler-:event=7, rc=0
[ 2678.733369] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2678.735415] [apds9130_suspend] Enter
[ 2678.735417] [Touch] mxt_suspend 
[ 2678.735459] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2678.735464] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2678.735470] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2678.735481] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2678.737678] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2678.737691] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2678.737703] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2678.737720] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2678.737731] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2678.749752] PM: Some devices failed to suspend
[ 2678.750442] qpnp_chg_resume: DEBUG_____chg_resume
[ 2678.750802] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2678.755313] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2678.755413] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2678.755829] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2678.756536] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2678.756541] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2678.756547] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2678.756556] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2678.771221] [Touch] mxt_resume 
[ 2678.780982] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2678.780989] mdss_dsi_event_handler: unhandled event=8
[ 2678.780995] mdss_dsi_event_handler-:event=8, rc=0
[ 2678.782342] tspdrv: !  tspdrv: resume.
[ 2678.872426] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2678.872554] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2678.872589] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2678.872699] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2679.013691] PM: resume of devices complete after 263.913 msecs
[ 2679.051083] pn544:IRQ GPIO = 0
[ 2679.019234] Restarting tasks ... done.
[ 2679.067735] PM: suspend exit 2017-02-06 18:19:08.044605357 UTC
[ 2679.168640] PM: suspend entry 2017-02-06 18:19:08.145510411 UTC
[ 2679.168654] PM: Syncing filesystems ... done.
[ 2679.172087] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2679.201687] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2679.204727] Suspending console(s) (use no_console_suspend to debug)
[ 2679.220416] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2679.220455] mdss_dsi_event_handler+:event=7
[ 2679.220462] mdss_dsi_event_handler: unhandled event=7
[ 2679.220469] mdss_dsi_event_handler-:event=7, rc=0
[ 2679.220484] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2679.222520] [apds9130_suspend] Enter
[ 2679.222521] [Touch] mxt_suspend 
[ 2679.222564] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2679.222568] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2679.222574] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2679.222585] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2679.224784] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2679.224798] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2679.224809] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2679.224827] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2679.224837] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2679.236830] PM: Some devices failed to suspend
[ 2679.237519] qpnp_chg_resume: DEBUG_____chg_resume
[ 2679.237882] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2679.242538] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2679.242824] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2679.243246] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2679.243772] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2679.243778] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2679.243783] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2679.243792] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2679.257669] [Touch] mxt_resume 
[ 2679.267914] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2679.267922] mdss_dsi_event_handler: unhandled event=8
[ 2679.267928] mdss_dsi_event_handler-:event=8, rc=0
[ 2679.272607] tspdrv: !  tspdrv: resume.
[ 2679.506104] PM: resume of devices complete after 269.245 msecs
[ 2679.543277] pn544:IRQ GPIO = 0
[ 2679.511492] Restarting tasks ... done.
[ 2679.560795] PM: suspend exit 2017-02-06 18:19:08.537651712 UTC
[ 2679.662389] PM: suspend entry 2017-02-06 18:19:08.639236088 UTC
[ 2679.662430] PM: Syncing filesystems ... done.
[ 2679.673885] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2679.733455] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2679.735534] Suspending console(s) (use no_console_suspend to debug)
[ 2679.744414] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2679.744434] mdss_dsi_event_handler+:event=7
[ 2679.744439] mdss_dsi_event_handler: unhandled event=7
[ 2679.744442] mdss_dsi_event_handler-:event=7, rc=0
[ 2679.744449] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2679.745763] [apds9130_suspend] Enter
[ 2679.745764] [Touch] mxt_suspend 
[ 2679.745785] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2679.745788] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2679.745791] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2679.745797] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2679.746951] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2679.746957] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2679.746963] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2679.746972] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2679.746977] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2679.760480] PM: Some devices failed to suspend
[ 2679.760871] qpnp_chg_resume: DEBUG_____chg_resume
[ 2679.761090] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2679.763523] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2679.763573] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2679.763697] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2679.763987] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2679.763990] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2679.763993] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2679.763997] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2679.776797] [Touch] mxt_resume 
[ 2679.785282] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2679.785286] mdss_dsi_event_handler: unhandled event=8
[ 2679.785289] mdss_dsi_event_handler-:event=8, rc=0
[ 2679.788850] tspdrv: !  tspdrv: resume.
[ 2680.023597] PM: resume of devices complete after 263.090 msecs
[ 2680.060863] pn544:IRQ GPIO = 0
[ 2680.029117] Restarting tasks ... done.
[ 2680.076980] PM: suspend exit 2017-02-06 18:19:09.053851451 UTC
[ 2680.178431] PM: suspend entry 2017-02-06 18:19:09.155301666 UTC
[ 2680.178444] PM: Syncing filesystems ... done.
[ 2680.181870] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2680.228783] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2680.233442] Suspending console(s) (use no_console_suspend to debug)
[ 2680.245684] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2680.245704] mdss_dsi_event_handler+:event=7
[ 2680.245708] mdss_dsi_event_handler: unhandled event=7
[ 2680.245711] mdss_dsi_event_handler-:event=7, rc=0
[ 2680.245719] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2680.246993] [apds9130_suspend] Enter
[ 2680.246994] [Touch] mxt_suspend 
[ 2680.247016] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2680.247018] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2680.247021] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2680.247027] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2680.248190] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2680.248196] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2680.248202] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2680.248212] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2680.248217] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2680.261384] PM: Some devices failed to suspend
[ 2680.261777] qpnp_chg_resume: DEBUG_____chg_resume
[ 2680.261996] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2680.264434] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2680.264484] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2680.264609] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2680.264900] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2680.264903] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2680.264906] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2680.264910] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2680.277687] [Touch] mxt_resume 
[ 2680.286379] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2680.286383] mdss_dsi_event_handler: unhandled event=8
[ 2680.286387] mdss_dsi_event_handler-:event=8, rc=0
[ 2680.289253] tspdrv: !  tspdrv: resume.
[ 2680.372040] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2680.372123] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2680.372143] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2680.372228] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2680.523213] PM: resume of devices complete after 261.805 msecs
[ 2680.560542] pn544:IRQ GPIO = 0
[ 2680.528705] Restarting tasks ... done.
[ 2680.576347] PM: suspend exit 2017-02-06 18:19:09.553197753 UTC
[ 2680.677855] PM: suspend entry 2017-02-06 18:19:09.654726037 UTC
[ 2680.677869] PM: Syncing filesystems ... done.
[ 2680.691535] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2680.745191] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2680.747264] Suspending console(s) (use no_console_suspend to debug)
[ 2680.756147] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2680.756167] mdss_dsi_event_handler+:event=7
[ 2680.756171] mdss_dsi_event_handler: unhandled event=7
[ 2680.756174] mdss_dsi_event_handler-:event=7, rc=0
[ 2680.756182] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2680.757446] [apds9130_suspend] Enter
[ 2680.757446] [Touch] mxt_suspend 
[ 2680.757468] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2680.757471] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2680.757474] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2680.757480] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2680.758634] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2680.758640] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2680.758646] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2680.758655] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2680.758660] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2680.772120] PM: Some devices failed to suspend
[ 2680.772512] qpnp_chg_resume: DEBUG_____chg_resume
[ 2680.772729] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2680.775172] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2680.775222] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2680.775345] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2680.775637] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2680.775640] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2680.775643] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2680.775647] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2680.788442] [Touch] mxt_resume 
[ 2680.798963] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2680.798967] mdss_dsi_event_handler: unhandled event=8
[ 2680.798970] mdss_dsi_event_handler-:event=8, rc=0
[ 2680.799635] tspdrv: !  tspdrv: resume.
[ 2681.033739] PM: resume of devices complete after 261.593 msecs
[ 2681.071000] pn544:IRQ GPIO = 0
[ 2681.039227] Restarting tasks ... done.
[ 2681.087283] PM: suspend exit 2017-02-06 18:19:10.064152909 UTC
[ 2681.188574] PM: suspend entry 2017-02-06 18:19:10.165444266 UTC
[ 2681.188587] PM: Syncing filesystems ... done.
[ 2681.192016] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2681.221681] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2681.224721] Suspending console(s) (use no_console_suspend to debug)
[ 2681.240383] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2681.240423] mdss_dsi_event_handler+:event=7
[ 2681.240430] mdss_dsi_event_handler: unhandled event=7
[ 2681.240436] mdss_dsi_event_handler-:event=7, rc=0
[ 2681.240451] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2681.242479] [apds9130_suspend] Enter
[ 2681.242481] [Touch] mxt_suspend 
[ 2681.242524] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2681.242528] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2681.242535] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2681.242545] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2681.244740] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2681.244754] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2681.244766] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2681.244783] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2681.244793] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2681.256836] PM: Some devices failed to suspend
[ 2681.257567] qpnp_chg_resume: DEBUG_____chg_resume
[ 2681.257925] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2681.262134] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2681.262410] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2681.262834] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2681.263371] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2681.263376] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2681.263383] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2681.263391] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2681.277902] [Touch] mxt_resume 
[ 2681.290600] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2681.290794] mdss_dsi_event_handler: unhandled event=8
[ 2681.290801] mdss_dsi_event_handler-:event=8, rc=0
[ 2681.292988] tspdrv: !  tspdrv: resume.
[ 2681.523358] PM: resume of devices complete after 266.494 msecs
[ 2681.560536] pn544:IRQ GPIO = 0
[ 2681.528850] Restarting tasks ... done.
[ 2681.574395] PM: suspend exit 2017-02-06 18:19:10.551244367 UTC
[ 2681.675806] PM: suspend entry 2017-02-06 18:19:10.652676243 UTC
[ 2681.675819] PM: Syncing filesystems ... done.
[ 2681.679251] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2681.728509] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2681.733166] Suspending console(s) (use no_console_suspend to debug)
[ 2681.745246] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2681.745266] mdss_dsi_event_handler+:event=7
[ 2681.745270] mdss_dsi_event_handler: unhandled event=7
[ 2681.745273] mdss_dsi_event_handler-:event=7, rc=0
[ 2681.745280] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2681.746543] [apds9130_suspend] Enter
[ 2681.746544] [Touch] mxt_suspend 
[ 2681.746566] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2681.746568] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2681.746571] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2681.746577] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2681.747734] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2681.747741] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2681.747746] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2681.747756] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2681.747761] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2681.761940] PM: Some devices failed to suspend
[ 2681.762328] qpnp_chg_resume: DEBUG_____chg_resume
[ 2681.762545] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2681.765029] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2681.765078] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2681.765203] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2681.765493] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2681.765496] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2681.765499] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2681.765503] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2681.778282] [Touch] mxt_resume 
[ 2681.788793] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2681.788798] mdss_dsi_event_handler: unhandled event=8
[ 2681.788801] mdss_dsi_event_handler-:event=8, rc=0
[ 2681.789467] tspdrv: !  tspdrv: resume.
[ 2681.872042] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2681.872128] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2681.872147] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2681.872211] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2682.022710] PM: resume of devices complete after 260.747 msecs
[ 2682.060200] pn544:IRQ GPIO = 0
[ 2682.028275] Restarting tasks ... done.
[ 2682.076356] PM: suspend exit 2017-02-06 18:19:11.053210149 UTC
[ 2682.177262] PM: suspend entry 2017-02-06 18:19:11.154132754 UTC
[ 2682.177276] PM: Syncing filesystems ... done.
[ 2682.180706] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2682.199946] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2682.202030] Suspending console(s) (use no_console_suspend to debug)
[ 2682.211078] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2682.211097] mdss_dsi_event_handler+:event=7
[ 2682.211101] mdss_dsi_event_handler: unhandled event=7
[ 2682.211104] mdss_dsi_event_handler-:event=7, rc=0
[ 2682.211112] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2682.212410] [apds9130_suspend] Enter
[ 2682.212410] [Touch] mxt_suspend 
[ 2682.212433] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2682.212436] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2682.212439] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2682.212444] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2682.213624] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2682.213630] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2682.213636] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2682.213646] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2682.213651] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2682.229463] PM: Some devices failed to suspend
[ 2682.230076] qpnp_chg_resume: DEBUG_____chg_resume
[ 2682.230381] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2682.234579] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2682.234654] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2682.235092] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2682.235679] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2682.235683] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2682.235688] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2682.235694] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2682.246154] [Touch] mxt_resume 
[ 2682.255970] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2682.255977] mdss_dsi_event_handler: unhandled event=8
[ 2682.255982] mdss_dsi_event_handler-:event=8, rc=0
[ 2682.257834] tspdrv: !  tspdrv: resume.
[ 2682.494256] PM: resume of devices complete after 264.766 msecs
[ 2682.531619] pn544:IRQ GPIO = 0
[ 2682.499817] Restarting tasks ... done.
[ 2682.547677] PM: suspend exit 2017-02-06 18:19:11.524529992 UTC
[ 2682.649002] PM: suspend entry 2017-02-06 18:19:11.625872858 UTC
[ 2682.649016] PM: Syncing filesystems ... done.
[ 2682.652445] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2682.681800] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2682.684847] Suspending console(s) (use no_console_suspend to debug)
[ 2682.700533] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2682.700574] mdss_dsi_event_handler+:event=7
[ 2682.700582] mdss_dsi_event_handler: unhandled event=7
[ 2682.700588] mdss_dsi_event_handler-:event=7, rc=0
[ 2682.700603] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2682.702643] [apds9130_suspend] Enter
[ 2682.702644] [Touch] mxt_suspend 
[ 2682.702687] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2682.702692] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2682.702698] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2682.702708] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2682.704904] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2682.704917] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2682.704929] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2682.704993] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2682.705004] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2682.716944] PM: Some devices failed to suspend
[ 2682.717647] qpnp_chg_resume: DEBUG_____chg_resume
[ 2682.718004] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2682.722653] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2682.722937] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2682.723358] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2682.723885] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2682.723891] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2682.723897] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2682.723906] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2682.738479] [Touch] mxt_resume 
[ 2682.751326] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2682.751335] mdss_dsi_event_handler: unhandled event=8
[ 2682.751340] mdss_dsi_event_handler-:event=8, rc=0
[ 2682.755710] tspdrv: !  tspdrv: resume.
[ 2682.983933] PM: resume of devices complete after 266.962 msecs
[ 2683.021339] pn544:IRQ GPIO = 0
[ 2682.989502] Restarting tasks ... done.
[ 2683.034896] PM: suspend exit 2017-02-06 18:19:12.011744731 UTC
[ 2683.138152] PM: suspend entry 2017-02-06 18:19:12.115022858 UTC
[ 2683.138166] PM: Syncing filesystems ... done.
[ 2683.141596] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2683.171660] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2683.174705] Suspending console(s) (use no_console_suspend to debug)
[ 2683.190385] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2683.190424] mdss_dsi_event_handler+:event=7
[ 2683.190432] mdss_dsi_event_handler: unhandled event=7
[ 2683.190439] mdss_dsi_event_handler-:event=7, rc=0
[ 2683.190453] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2683.192494] [apds9130_suspend] Enter
[ 2683.192496] [Touch] mxt_suspend 
[ 2683.192539] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2683.192544] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2683.192550] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2683.192561] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2683.194767] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2683.194780] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2683.194791] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2683.194809] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2683.194820] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2683.206808] PM: Some devices failed to suspend
[ 2683.207497] qpnp_chg_resume: DEBUG_____chg_resume
[ 2683.207858] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2683.212075] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2683.212351] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2683.212772] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2683.213297] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2683.213302] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2683.213308] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2683.213317] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2683.227898] [Touch] mxt_resume 
[ 2683.240802] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2683.240810] mdss_dsi_event_handler: unhandled event=8
[ 2683.240816] mdss_dsi_event_handler-:event=8, rc=0
[ 2683.243005] tspdrv: !  tspdrv: resume.
[ 2683.372379] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2683.372513] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2683.372549] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2683.372659] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2683.475710] PM: resume of devices complete after 268.877 msecs
[ 2683.512925] pn544:IRQ GPIO = 0
[ 2683.481145] Restarting tasks ... done.
[ 2683.528950] PM: suspend exit 2017-02-06 18:19:12.505806605 UTC
[ 2683.630638] PM: suspend entry 2017-02-06 18:19:12.607489941 UTC
[ 2683.630672] PM: Syncing filesystems ... done.
[ 2683.643015] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2683.688140] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2683.690211] Suspending console(s) (use no_console_suspend to debug)
[ 2683.699179] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2683.699198] mdss_dsi_event_handler+:event=7
[ 2683.699202] mdss_dsi_event_handler: unhandled event=7
[ 2683.699205] mdss_dsi_event_handler-:event=7, rc=0
[ 2683.699212] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2683.700475] [apds9130_suspend] Enter
[ 2683.700476] [Touch] mxt_suspend 
[ 2683.700498] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2683.700500] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2683.700504] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2683.700510] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2683.701665] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2683.701672] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2683.701677] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2683.701687] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2683.701692] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2683.715068] PM: Some devices failed to suspend
[ 2683.715350] qpnp_chg_resume: DEBUG_____chg_resume
[ 2683.715432] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2683.718294] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2683.718343] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2683.718468] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2683.718757] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2683.718760] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2683.718763] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2683.718767] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2683.731572] [Touch] mxt_resume 
[ 2683.743239] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2683.743243] mdss_dsi_event_handler: unhandled event=8
[ 2683.743246] mdss_dsi_event_handler-:event=8, rc=0
[ 2683.743926] tspdrv: !  tspdrv: resume.
[ 2683.984133] PM: resume of devices complete after 269.039 msecs
[ 2684.021575] pn544:IRQ GPIO = 0
[ 2683.989723] Restarting tasks ... done.
[ 2684.038030] PM: suspend exit 2017-02-06 18:19:13.014902179 UTC
[ 2684.139326] PM: suspend entry 2017-02-06 18:19:13.116196866 UTC
[ 2684.139340] PM: Syncing filesystems ... done.
[ 2684.142773] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2684.173726] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2684.176766] Suspending console(s) (use no_console_suspend to debug)
[ 2684.192331] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2684.192370] mdss_dsi_event_handler+:event=7
[ 2684.192378] mdss_dsi_event_handler: unhandled event=7
[ 2684.192384] mdss_dsi_event_handler-:event=7, rc=0
[ 2684.192399] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2684.194433] [apds9130_suspend] Enter
[ 2684.194435] [Touch] mxt_suspend 
[ 2684.194477] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2684.194482] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2684.194488] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2684.194498] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2684.196739] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2684.196752] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2684.196763] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2684.196781] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2684.196791] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2684.208985] PM: Some devices failed to suspend
[ 2684.209677] qpnp_chg_resume: DEBUG_____chg_resume
[ 2684.210036] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2684.214695] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2684.215006] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2684.215424] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2684.215951] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2684.215956] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2684.215962] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2684.216144] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2684.230768] [Touch] mxt_resume 
[ 2684.241011] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2684.241018] mdss_dsi_event_handler: unhandled event=8
[ 2684.241024] mdss_dsi_event_handler-:event=8, rc=0
[ 2684.242371] tspdrv: !  tspdrv: resume.
[ 2684.477377] PM: resume of devices complete after 268.365 msecs
[ 2684.514560] pn544:IRQ GPIO = 0
[ 2684.482754] Restarting tasks ... done.
[ 2684.530458] PM: suspend exit 2017-02-06 18:19:13.507311345 UTC
[ 2684.631855] PM: suspend entry 2017-02-06 18:19:13.608725771 UTC
[ 2684.631869] PM: Syncing filesystems ... done.
[ 2684.635349] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2684.655612] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2684.657682] Suspending console(s) (use no_console_suspend to debug)
[ 2684.666612] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2684.666633] mdss_dsi_event_handler+:event=7
[ 2684.666637] mdss_dsi_event_handler: unhandled event=7
[ 2684.666640] mdss_dsi_event_handler-:event=7, rc=0
[ 2684.666647] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2684.667907] [apds9130_suspend] Enter
[ 2684.667908] [Touch] mxt_suspend 
[ 2684.667930] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2684.667932] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2684.667935] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2684.667941] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2684.669101] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2684.669107] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2684.669113] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2684.669123] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2684.669128] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2684.683624] PM: Some devices failed to suspend
[ 2684.684058] qpnp_chg_resume: DEBUG_____chg_resume
[ 2684.684301] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2684.687518] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2684.687576] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2684.687848] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2684.688059] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2684.688062] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2684.688066] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2684.688071] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2684.700996] [Touch] mxt_resume 
[ 2684.712827] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2684.712832] mdss_dsi_event_handler: unhandled event=8
[ 2684.712836] mdss_dsi_event_handler-:event=8, rc=0
[ 2684.713611] tspdrv: !  tspdrv: resume.
[ 2684.872412] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2684.872527] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2684.872555] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2684.872646] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2684.948402] PM: resume of devices complete after 264.754 msecs
[ 2684.985679] pn544:IRQ GPIO = 0
[ 2684.953826] Restarting tasks ... done.
[ 2684.999896] PM: suspend exit 2017-02-06 18:19:13.976746658 UTC
[ 2685.041216] BMS: adjust_soc: ibat_ua = 175272, vbat_uv = 3741753, ocv_est_uv = 3774704, pc_est = 38, soc_est = 33, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2685.056005] New_cal_SOC = 43, SOC = 43, batt_temp = 289, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 202164, iavg_ua = 102240
[ 2685.101243] PM: suspend entry 2017-02-06 18:19:14.078114103 UTC
[ 2685.101257] PM: Syncing filesystems ... done.
[ 2685.104683] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2685.123931] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2685.126014] Suspending console(s) (use no_console_suspend to debug)
[ 2685.135069] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2685.135090] mdss_dsi_event_handler+:event=7
[ 2685.135094] mdss_dsi_event_handler: unhandled event=7
[ 2685.135097] mdss_dsi_event_handler-:event=7, rc=0
[ 2685.135104] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2685.136399] [apds9130_suspend] Enter
[ 2685.136399] [Touch] mxt_suspend 
[ 2685.136422] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2685.136424] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2685.136427] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2685.136433] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2685.137616] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2685.137622] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2685.137628] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2685.137638] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2685.137643] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2685.152216] PM: Some devices failed to suspend
[ 2685.152658] qpnp_chg_resume: DEBUG_____chg_resume
[ 2685.152904] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2685.155598] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2685.155658] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2685.155933] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2685.156148] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2685.156151] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2685.156155] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2685.156160] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2685.169095] [Touch] mxt_resume 
[ 2685.181039] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2685.181044] mdss_dsi_event_handler: unhandled event=8
[ 2685.181048] mdss_dsi_event_handler-:event=8, rc=0
[ 2685.181823] tspdrv: !  tspdrv: resume.
[ 2685.412965] PM: resume of devices complete after 260.724 msecs
[ 2685.450322] pn544:IRQ GPIO = 0
[ 2685.418527] Restarting tasks ... done.
[ 2685.466996] PM: suspend exit 2017-02-06 18:19:14.443847179 UTC
[ 2685.568798] PM: suspend entry 2017-02-06 18:19:14.545668695 UTC
[ 2685.568812] PM: Syncing filesystems ... done.
[ 2685.572241] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2685.618813] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2685.623460] Suspending console(s) (use no_console_suspend to debug)
[ 2685.635380] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2685.635400] mdss_dsi_event_handler+:event=7
[ 2685.635404] mdss_dsi_event_handler: unhandled event=7
[ 2685.635407] mdss_dsi_event_handler-:event=7, rc=0
[ 2685.635414] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2685.636681] [apds9130_suspend] Enter
[ 2685.636682] [Touch] mxt_suspend 
[ 2685.636703] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2685.636706] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2685.636709] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2685.636715] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2685.637871] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2685.637877] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2685.637883] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2685.637892] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2685.637897] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2685.651394] PM: Some devices failed to suspend
[ 2685.651784] qpnp_chg_resume: DEBUG_____chg_resume
[ 2685.652002] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2685.654441] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2685.654491] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2685.654617] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2685.654906] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2685.654909] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2685.654912] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2685.654916] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2685.667699] [Touch] mxt_resume 
[ 2685.676424] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2685.676428] mdss_dsi_event_handler: unhandled event=8
[ 2685.676431] mdss_dsi_event_handler-:event=8, rc=0
[ 2685.679305] tspdrv: !  tspdrv: resume.
[ 2685.913754] PM: resume of devices complete after 262.334 msecs
[ 2685.951099] pn544:IRQ GPIO = 0
[ 2685.919308] Restarting tasks ... done.
[ 2685.967694] PM: suspend exit 2017-02-06 18:19:14.944546397 UTC
[ 2686.069007] PM: suspend entry 2017-02-06 18:19:15.045877231 UTC
[ 2686.069020] PM: Syncing filesystems ... done.
[ 2686.072449] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2686.101808] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2686.104845] Suspending console(s) (use no_console_suspend to debug)
[ 2686.120553] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2686.120591] mdss_dsi_event_handler+:event=7
[ 2686.120599] mdss_dsi_event_handler: unhandled event=7
[ 2686.120606] mdss_dsi_event_handler-:event=7, rc=0
[ 2686.120620] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2686.122651] [apds9130_suspend] Enter
[ 2686.122653] [Touch] mxt_suspend 
[ 2686.122695] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2686.122700] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2686.122706] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2686.122716] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2686.124909] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2686.124922] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2686.124933] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2686.124994] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2686.125005] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2686.136991] PM: Some devices failed to suspend
[ 2686.137685] qpnp_chg_resume: DEBUG_____chg_resume
[ 2686.138037] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2686.142264] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2686.142540] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2686.142960] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2686.143482] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2686.143487] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2686.143493] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2686.143501] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2686.158069] [Touch] mxt_resume 
[ 2686.170953] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2686.170962] mdss_dsi_event_handler: unhandled event=8
[ 2686.170968] mdss_dsi_event_handler-:event=8, rc=0
[ 2686.175494] tspdrv: !  tspdrv: resume.
[ 2686.372359] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2686.372480] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2686.372516] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2686.372624] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2686.403852] PM: resume of devices complete after 266.836 msecs
[ 2686.441215] pn544:IRQ GPIO = 0
[ 2686.409489] Restarting tasks ... done.
[ 2686.454765] PM: suspend exit 2017-02-06 18:19:15.431612698 UTC
[ 2686.556027] PM: suspend entry 2017-02-06 18:19:15.532897601 UTC
[ 2686.556041] PM: Syncing filesystems ... done.
[ 2686.559469] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2686.608514] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2686.613165] Suspending console(s) (use no_console_suspend to debug)
[ 2686.625186] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2686.625205] mdss_dsi_event_handler+:event=7
[ 2686.625209] mdss_dsi_event_handler: unhandled event=7
[ 2686.625212] mdss_dsi_event_handler-:event=7, rc=0
[ 2686.625219] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2686.626484] [apds9130_suspend] Enter
[ 2686.626484] [Touch] mxt_suspend 
[ 2686.626506] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2686.626509] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2686.626512] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2686.626518] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2686.627677] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2686.627684] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2686.627689] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2686.627699] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2686.627704] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2686.641154] PM: Some devices failed to suspend
[ 2686.641544] qpnp_chg_resume: DEBUG_____chg_resume
[ 2686.641763] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2686.644202] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2686.644251] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2686.644374] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2686.644662] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2686.644664] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2686.644667] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2686.644672] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2686.657445] [Touch] mxt_resume 
[ 2686.665977] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2686.665981] mdss_dsi_event_handler: unhandled event=8
[ 2686.665984] mdss_dsi_event_handler-:event=8, rc=0
[ 2686.669072] tspdrv: !  tspdrv: resume.
[ 2686.903707] PM: resume of devices complete after 262.527 msecs
[ 2686.941084] pn544:IRQ GPIO = 0
[ 2686.909174] Restarting tasks ... done.
[ 2686.957217] PM: suspend exit 2017-02-06 18:19:15.934069053 UTC
[ 2687.058828] PM: suspend entry 2017-02-06 18:19:16.035698480 UTC
[ 2687.058841] PM: Syncing filesystems ... done.
[ 2687.062271] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2687.091752] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2687.094791] Suspending console(s) (use no_console_suspend to debug)
[ 2687.110483] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2687.110523] mdss_dsi_event_handler+:event=7
[ 2687.110531] mdss_dsi_event_handler: unhandled event=7
[ 2687.110537] mdss_dsi_event_handler-:event=7, rc=0
[ 2687.110552] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2687.112589] [apds9130_suspend] Enter
[ 2687.112591] [Touch] mxt_suspend 
[ 2687.112633] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2687.112638] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2687.112644] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2687.112654] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2687.114853] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2687.114866] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2687.114877] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2687.114896] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2687.114907] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2687.126900] PM: Some devices failed to suspend
[ 2687.127588] qpnp_chg_resume: DEBUG_____chg_resume
[ 2687.127946] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2687.132577] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2687.132852] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2687.133274] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2687.133801] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2687.133807] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2687.133813] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2687.133822] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2687.148384] [Touch] mxt_resume 
[ 2687.161311] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2687.161319] mdss_dsi_event_handler: unhandled event=8
[ 2687.161325] mdss_dsi_event_handler-:event=8, rc=0
[ 2687.165686] tspdrv: !  tspdrv: resume.
[ 2687.395223] PM: resume of devices complete after 268.294 msecs
[ 2687.432483] pn544:IRQ GPIO = 0
[ 2687.400606] Restarting tasks ... done.
[ 2687.448392] PM: suspend exit 2017-02-06 18:19:16.425248011 UTC
[ 2687.549939] PM: suspend entry 2017-02-06 18:19:16.526798688 UTC
[ 2687.549965] PM: Syncing filesystems ... done.
[ 2687.556688] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2687.596775] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2687.599814] Suspending console(s) (use no_console_suspend to debug)
[ 2687.615580] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2687.615617] mdss_dsi_event_handler+:event=7
[ 2687.615624] mdss_dsi_event_handler: unhandled event=7
[ 2687.615631] mdss_dsi_event_handler-:event=7, rc=0
[ 2687.615645] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2687.617680] [apds9130_suspend] Enter
[ 2687.617682] [Touch] mxt_suspend 
[ 2687.617724] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2687.617729] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2687.617735] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2687.617745] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2687.619944] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2687.619957] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2687.619969] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2687.619986] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2687.619996] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2687.631919] PM: Some devices failed to suspend
[ 2687.632610] qpnp_chg_resume: DEBUG_____chg_resume
[ 2687.632970] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2687.637607] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2687.637881] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2687.638300] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2687.638825] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2687.638831] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2687.638837] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2687.638845] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2687.653493] [Touch] mxt_resume 
[ 2687.664678] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2687.664686] mdss_dsi_event_handler: unhandled event=8
[ 2687.664692] mdss_dsi_event_handler-:event=8, rc=0
[ 2687.667738] tspdrv: !  tspdrv: resume.
[ 2687.872395] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2687.872527] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2687.872563] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2687.872672] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2687.903831] PM: resume of devices complete after 271.887 msecs
[ 2687.941188] pn544:IRQ GPIO = 0
[ 2687.909456] Restarting tasks ... done.
[ 2687.954698] PM: suspend exit 2017-02-06 18:19:16.931547853 UTC
[ 2688.055975] PM: suspend entry 2017-02-06 18:19:17.032845977 UTC
[ 2688.055989] PM: Syncing filesystems ... done.
[ 2688.059421] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2688.078947] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2688.082004] Suspending console(s) (use no_console_suspend to debug)
[ 2688.097790] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2688.097830] mdss_dsi_event_handler+:event=7
[ 2688.097837] mdss_dsi_event_handler: unhandled event=7
[ 2688.097844] mdss_dsi_event_handler-:event=7, rc=0
[ 2688.097858] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2688.099945] [apds9130_suspend] Enter
[ 2688.099947] [Touch] mxt_suspend 
[ 2688.099991] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2688.099995] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2688.100001] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2688.100011] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2688.102262] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2688.102275] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2688.102286] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2688.102305] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2688.102316] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2688.114245] PM: Some devices failed to suspend
[ 2688.115027] qpnp_chg_resume: DEBUG_____chg_resume
[ 2688.115390] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2688.119497] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2688.119772] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2688.120194] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2688.120725] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2688.120731] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2688.120737] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2688.120745] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2688.135481] [Touch] mxt_resume 
[ 2688.146867] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2688.146875] mdss_dsi_event_handler: unhandled event=8
[ 2688.146881] mdss_dsi_event_handler-:event=8, rc=0
[ 2688.151712] tspdrv: !  tspdrv: resume.
[ 2688.383684] PM: resume of devices complete after 269.411 msecs
[ 2688.421163] pn544:IRQ GPIO = 0
[ 2688.389190] Restarting tasks ... done.
[ 2688.436492] PM: suspend exit 2017-02-06 18:19:17.413343271 UTC
[ 2688.537836] PM: suspend entry 2017-02-06 18:19:17.514706713 UTC
[ 2688.537849] PM: Syncing filesystems ... done.
[ 2688.541285] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2688.588681] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2688.593343] Suspending console(s) (use no_console_suspend to debug)
[ 2688.603594] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2688.603613] mdss_dsi_event_handler+:event=7
[ 2688.603617] mdss_dsi_event_handler: unhandled event=7
[ 2688.603620] mdss_dsi_event_handler-:event=7, rc=0
[ 2688.603627] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2688.604799] [apds9130_suspend] Enter
[ 2688.604800] [Touch] mxt_suspend 
[ 2688.604822] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2688.604824] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2688.604828] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2688.604834] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2688.606074] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2688.606081] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2688.606086] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2688.606096] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2688.606101] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2688.617503] PM: Some devices failed to suspend
[ 2688.617900] qpnp_chg_resume: DEBUG_____chg_resume
[ 2688.618236] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2688.620550] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2688.620600] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2688.620724] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2688.621013] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2688.621016] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2688.621019] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2688.621023] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2688.633803] [Touch] mxt_resume 
[ 2688.643968] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2688.643972] mdss_dsi_event_handler: unhandled event=8
[ 2688.643975] mdss_dsi_event_handler-:event=8, rc=0
[ 2688.644655] tspdrv: !  tspdrv: resume.
[ 2688.878025] PM: resume of devices complete after 260.497 msecs
[ 2688.915794] pn544:IRQ GPIO = 0
[ 2688.883398] Restarting tasks ... done.
[ 2688.934136] PM: suspend exit 2017-02-06 18:19:17.910987489 UTC
[ 2689.035388] PM: suspend entry 2017-02-06 18:19:18.012258481 UTC
[ 2689.035401] PM: Syncing filesystems ... done.
[ 2689.038835] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2689.058470] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2689.061536] Suspending console(s) (use no_console_suspend to debug)
[ 2689.077324] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2689.077362] mdss_dsi_event_handler+:event=7
[ 2689.077370] mdss_dsi_event_handler: unhandled event=7
[ 2689.077377] mdss_dsi_event_handler-:event=7, rc=0
[ 2689.077391] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2689.079493] [apds9130_suspend] Enter
[ 2689.079495] [Touch] mxt_suspend 
[ 2689.079538] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2689.079543] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2689.079549] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2689.079559] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2689.081798] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2689.081811] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2689.081822] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2689.081841] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2689.081851] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2689.093745] PM: Some devices failed to suspend
[ 2689.094448] qpnp_chg_resume: DEBUG_____chg_resume
[ 2689.094805] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2689.099960] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2689.100237] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2689.100661] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2689.101190] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2689.101196] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2689.101202] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2689.101210] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2689.109351] [Touch] mxt_resume 
[ 2689.122515] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2689.122524] mdss_dsi_event_handler: unhandled event=8
[ 2689.122530] mdss_dsi_event_handler-:event=8, rc=0
[ 2689.123877] tspdrv: !  tspdrv: resume.
[ 2689.366040] PM: resume of devices complete after 272.269 msecs
[ 2689.387626] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2689.387793] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2689.387851] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2689.387979] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2689.404053] pn544:IRQ GPIO = 0
[ 2689.371441] Restarting tasks ... done.
[ 2689.419917] PM: suspend exit 2017-02-06 18:19:18.396774311 UTC
[ 2689.521551] PM: suspend entry 2017-02-06 18:19:18.498403479 UTC
[ 2689.521585] PM: Syncing filesystems ... done.
[ 2689.533699] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2689.591690] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2689.593763] Suspending console(s) (use no_console_suspend to debug)
[ 2689.602689] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2689.602709] mdss_dsi_event_handler+:event=7
[ 2689.602713] mdss_dsi_event_handler: unhandled event=7
[ 2689.602716] mdss_dsi_event_handler-:event=7, rc=0
[ 2689.602724] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2689.603905] [apds9130_suspend] Enter
[ 2689.603906] [Touch] mxt_suspend 
[ 2689.603928] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2689.603931] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2689.603934] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2689.603940] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2689.605145] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2689.605152] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2689.605157] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2689.605167] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2689.605172] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2689.619071] PM: Some devices failed to suspend
[ 2689.619456] qpnp_chg_resume: DEBUG_____chg_resume
[ 2689.619676] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2689.622128] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2689.622178] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2689.622302] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2689.622590] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2689.622592] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2689.622595] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2689.622599] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2689.631762] [Touch] mxt_resume 
[ 2689.643425] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2689.643430] mdss_dsi_event_handler: unhandled event=8
[ 2689.643433] mdss_dsi_event_handler-:event=8, rc=0
[ 2689.644111] tspdrv: !  tspdrv: resume.
[ 2689.871301] PM: resume of devices complete after 252.204 msecs
[ 2689.908708] pn544:IRQ GPIO = 0
[ 2689.876950] Restarting tasks ... done.
[ 2689.922270] PM: suspend exit 2017-02-06 18:19:18.899118531 UTC
[ 2690.023198] PM: suspend entry 2017-02-06 18:19:19.000046500 UTC
[ 2690.023238] PM: Syncing filesystems ... done.
[ 2690.034182] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2690.082317] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2690.084399] Suspending console(s) (use no_console_suspend to debug)
[ 2690.089178] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2690.089200] mdss_dsi_event_handler+:event=7
[ 2690.089204] mdss_dsi_event_handler: unhandled event=7
[ 2690.089207] mdss_dsi_event_handler-:event=7, rc=0
[ 2690.089215] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2690.090809] [apds9130_suspend] Enter
[ 2690.090810] [Touch] mxt_suspend 
[ 2690.090831] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2690.090834] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2690.090837] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2690.090843] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2690.092839] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2690.092845] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2690.092851] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2690.092861] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2690.092866] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2690.108778] PM: Some devices failed to suspend
[ 2690.109172] qpnp_chg_resume: DEBUG_____chg_resume
[ 2690.109391] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2690.111825] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2690.111874] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2690.111998] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2690.112292] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2690.112295] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2690.112298] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2690.112302] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2690.119055] [Touch] mxt_resume 
[ 2690.130729] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2690.130734] mdss_dsi_event_handler: unhandled event=8
[ 2690.130737] mdss_dsi_event_handler-:event=8, rc=0
[ 2690.131418] tspdrv: !  tspdrv: resume.
[ 2690.370033] PM: resume of devices complete after 261.229 msecs
[ 2690.407442] pn544:IRQ GPIO = 0
[ 2690.375576] Restarting tasks ... done.
[ 2690.422285] PM: suspend exit 2017-02-06 18:19:19.399136030 UTC
[ 2690.523674] PM: suspend entry 2017-02-06 18:19:19.500544941 UTC
[ 2690.523688] PM: Syncing filesystems ... done.
[ 2690.561781] Freezing user space processes ... (elapsed 0.07 seconds) done.
[ 2690.633759] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2690.638944] Suspending console(s) (use no_console_suspend to debug)
[ 2690.663281] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2690.663347] mdss_dsi_event_handler+:event=7
[ 2690.663361] mdss_dsi_event_handler: unhandled event=7
[ 2690.663373] mdss_dsi_event_handler-:event=7, rc=0
[ 2690.663402] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2690.673461] [apds9130_suspend] Enter
[ 2690.673463] [Touch] mxt_suspend 
[ 2690.673547] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2690.673557] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2690.673568] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2690.673586] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2690.678744] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2690.678769] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2690.678791] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2690.678828] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2690.678849] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2690.678863] PM: Some devices failed to suspend
[ 2690.681094] qpnp_chg_resume: DEBUG_____chg_resume
[ 2690.681884] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2690.686567] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2690.686963] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2690.687786] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2690.688521] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2690.688530] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2690.688540] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2690.688552] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2690.702458] [Touch] mxt_resume 
[ 2690.713550] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2690.713561] mdss_dsi_event_handler: unhandled event=8
[ 2690.713571] mdss_dsi_event_handler-:event=8, rc=0
[ 2690.716806] tspdrv: !  tspdrv: resume.
[ 2690.928404] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2690.928539] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2690.928574] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2690.928685] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2690.946577] PM: resume of devices complete after 267.687 msecs
[ 2690.983748] pn544:IRQ GPIO = 0
[ 2690.952001] Restarting tasks ... done.
[ 2690.999059] PM: suspend exit 2017-02-06 18:19:19.975914676 UTC
[ 2691.100537] PM: suspend entry 2017-02-06 18:19:20.077396551 UTC
[ 2691.100563] PM: Syncing filesystems ... done.
[ 2691.107509] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2691.149279] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2691.152319] Suspending console(s) (use no_console_suspend to debug)
[ 2691.167946] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2691.167985] mdss_dsi_event_handler+:event=7
[ 2691.167993] mdss_dsi_event_handler: unhandled event=7
[ 2691.167999] mdss_dsi_event_handler-:event=7, rc=0
[ 2691.168014] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2691.170049] [apds9130_suspend] Enter
[ 2691.170051] [Touch] mxt_suspend 
[ 2691.170093] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2691.170098] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2691.170104] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2691.170115] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2691.172305] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2691.172318] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2691.172330] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2691.172348] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2691.172358] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2691.184422] PM: Some devices failed to suspend
[ 2691.185202] qpnp_chg_resume: DEBUG_____chg_resume
[ 2691.185335] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2691.190289] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2691.190566] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2691.190990] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2691.191514] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2691.191519] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2691.191525] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2691.191533] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2691.206129] [Touch] mxt_resume 
[ 2691.216538] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2691.216546] mdss_dsi_event_handler: unhandled event=8
[ 2691.216552] mdss_dsi_event_handler-:event=8, rc=0
[ 2691.221384] tspdrv: !  tspdrv: resume.
[ 2691.457073] PM: resume of devices complete after 272.622 msecs
[ 2691.494222] pn544:IRQ GPIO = 0
[ 2691.462465] Restarting tasks ... done.
[ 2691.510337] PM: suspend exit 2017-02-06 18:19:20.487191654 UTC
[ 2691.611697] PM: suspend entry 2017-02-06 18:19:20.588567228 UTC
[ 2691.611710] PM: Syncing filesystems ... done.
[ 2691.615434] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2691.635667] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2691.637738] Suspending console(s) (use no_console_suspend to debug)
[ 2691.646666] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2691.646686] mdss_dsi_event_handler+:event=7
[ 2691.646690] mdss_dsi_event_handler: unhandled event=7
[ 2691.646693] mdss_dsi_event_handler-:event=7, rc=0
[ 2691.646701] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2691.647959] [apds9130_suspend] Enter
[ 2691.647960] [Touch] mxt_suspend 
[ 2691.647982] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2691.647984] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2691.647987] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2691.647993] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2691.649149] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2691.649156] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2691.649161] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2691.649170] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2691.649176] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2691.663711] PM: Some devices failed to suspend
[ 2691.664149] qpnp_chg_resume: DEBUG_____chg_resume
[ 2691.664389] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2691.667506] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2691.667566] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2691.667836] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2691.668045] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2691.668048] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2691.668052] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2691.668056] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2691.680988] [Touch] mxt_resume 
[ 2691.692815] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2691.692820] mdss_dsi_event_handler: unhandled event=8
[ 2691.692823] mdss_dsi_event_handler-:event=8, rc=0
[ 2691.693598] tspdrv: !  tspdrv: resume.
[ 2691.929546] PM: resume of devices complete after 265.808 msecs
[ 2691.966913] pn544:IRQ GPIO = 0
[ 2691.934933] Restarting tasks ... done.
[ 2691.981090] PM: suspend exit 2017-02-06 18:19:20.957940873 UTC
[ 2692.082458] PM: suspend entry 2017-02-06 18:19:21.059328738 UTC
[ 2692.082471] PM: Syncing filesystems ... done.
[ 2692.085942] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2692.106179] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2692.108244] Suspending console(s) (use no_console_suspend to debug)
[ 2692.117186] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2692.117206] mdss_dsi_event_handler+:event=7
[ 2692.117210] mdss_dsi_event_handler: unhandled event=7
[ 2692.117213] mdss_dsi_event_handler-:event=7, rc=0
[ 2692.117220] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2692.118483] [apds9130_suspend] Enter
[ 2692.118483] [Touch] mxt_suspend 
[ 2692.118505] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2692.118507] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2692.118511] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2692.118516] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2692.119673] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2692.119680] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2692.119685] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2692.119695] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2692.119700] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2692.133854] PM: Some devices failed to suspend
[ 2692.134292] qpnp_chg_resume: DEBUG_____chg_resume
[ 2692.134533] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2692.137647] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2692.137707] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2692.137976] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2692.138187] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2692.138190] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2692.138193] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2692.138198] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2692.151123] [Touch] mxt_resume 
[ 2692.162956] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2692.162961] mdss_dsi_event_handler: unhandled event=8
[ 2692.162965] mdss_dsi_event_handler-:event=8, rc=0
[ 2692.163739] tspdrv: !  tspdrv: resume.
[ 2692.397599] PM: resume of devices complete after 263.717 msecs
[ 2692.434864] pn544:IRQ GPIO = 0
[ 2692.448159] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2692.448338] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2692.448397] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2692.448529] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2692.402979] Restarting tasks ... done.
[ 2692.450444] PM: suspend exit 2017-02-06 18:19:21.427316915 UTC
[ 2692.551753] PM: suspend entry 2017-02-06 18:19:21.528624159 UTC
[ 2692.551767] PM: Syncing filesystems ... done.
[ 2692.555244] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2692.592149] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2692.596210] Suspending console(s) (use no_console_suspend to debug)
[ 2692.617947] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2692.617984] mdss_dsi_event_handler+:event=7
[ 2692.617992] mdss_dsi_event_handler: unhandled event=7
[ 2692.617998] mdss_dsi_event_handler-:event=7, rc=0
[ 2692.618013] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2692.620049] [apds9130_suspend] Enter
[ 2692.620050] [Touch] mxt_suspend 
[ 2692.620092] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2692.620097] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2692.620103] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2692.620114] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2692.622312] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2692.622325] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2692.622336] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2692.622354] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2692.622364] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2692.631537] PM: Some devices failed to suspend
[ 2692.632228] qpnp_chg_resume: DEBUG_____chg_resume
[ 2692.632588] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2692.637224] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2692.637502] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2692.637923] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2692.638448] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2692.638454] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2692.638460] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2692.638469] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2692.653036] [Touch] mxt_resume 
[ 2692.664454] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2692.664463] mdss_dsi_event_handler: unhandled event=8
[ 2692.664469] mdss_dsi_event_handler-:event=8, rc=0
[ 2692.667353] tspdrv: !  tspdrv: resume.
[ 2692.905874] PM: resume of devices complete after 274.309 msecs
[ 2692.943043] pn544:IRQ GPIO = 0
[ 2692.911255] Restarting tasks ... done.
[ 2692.959113] PM: suspend exit 2017-02-06 18:19:21.935966758 UTC
[ 2693.060445] PM: suspend entry 2017-02-06 18:19:22.037315145 UTC
[ 2693.060459] PM: Syncing filesystems ... done.
[ 2693.063891] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2693.095401] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2693.098442] Suspending console(s) (use no_console_suspend to debug)
[ 2693.114080] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2693.114119] mdss_dsi_event_handler+:event=7
[ 2693.114127] mdss_dsi_event_handler: unhandled event=7
[ 2693.114134] mdss_dsi_event_handler-:event=7, rc=0
[ 2693.114149] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2693.116226] [apds9130_suspend] Enter
[ 2693.116227] [Touch] mxt_suspend 
[ 2693.116268] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2693.116273] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2693.116279] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2693.116290] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2693.118489] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2693.118502] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2693.118513] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2693.118531] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2693.118542] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2693.130527] PM: Some devices failed to suspend
[ 2693.131219] qpnp_chg_resume: DEBUG_____chg_resume
[ 2693.131577] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2693.136211] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2693.136489] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2693.136911] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2693.137613] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2693.137618] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2693.137624] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2693.137632] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2693.152380] [Touch] mxt_resume 
[ 2693.164618] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2693.164626] mdss_dsi_event_handler: unhandled event=8
[ 2693.164633] mdss_dsi_event_handler-:event=8, rc=0
[ 2693.167607] tspdrv: !  tspdrv: resume.
[ 2693.403628] PM: resume of devices complete after 273.072 msecs
[ 2693.441095] pn544:IRQ GPIO = 0
[ 2693.409207] Restarting tasks ... done.
[ 2693.457277] PM: suspend exit 2017-02-06 18:19:22.434132332 UTC
[ 2693.558848] PM: suspend entry 2017-02-06 18:19:22.535718164 UTC
[ 2693.558861] PM: Syncing filesystems ... done.
[ 2693.562300] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2693.591744] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2693.594789] Suspending console(s) (use no_console_suspend to debug)
[ 2693.610505] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2693.610543] mdss_dsi_event_handler+:event=7
[ 2693.610550] mdss_dsi_event_handler: unhandled event=7
[ 2693.610556] mdss_dsi_event_handler-:event=7, rc=0
[ 2693.610571] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2693.612613] [apds9130_suspend] Enter
[ 2693.612614] [Touch] mxt_suspend 
[ 2693.612656] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2693.612661] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2693.612667] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2693.612677] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2693.614869] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2693.614882] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2693.614894] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2693.614911] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2693.614922] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2693.626922] PM: Some devices failed to suspend
[ 2693.627619] qpnp_chg_resume: DEBUG_____chg_resume
[ 2693.627976] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2693.632633] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2693.632910] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2693.633337] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2693.633865] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2693.633870] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2693.633876] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2693.633885] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2693.648468] [Touch] mxt_resume 
[ 2693.661306] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2693.661314] mdss_dsi_event_handler: unhandled event=8
[ 2693.661320] mdss_dsi_event_handler-:event=8, rc=0
[ 2693.665686] tspdrv: !  tspdrv: resume.
[ 2693.894128] PM: resume of devices complete after 267.180 msecs
[ 2693.931897] pn544:IRQ GPIO = 0
[ 2693.899708] Restarting tasks ... done.
[ 2693.948079] PM: suspend exit 2017-02-06 18:19:22.924949935 UTC
[ 2693.960962] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2693.961020] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2693.961035] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2693.961073] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2694.049380] PM: suspend entry 2017-02-06 18:19:23.026250614 UTC
[ 2694.049394] PM: Syncing filesystems ... done.
[ 2694.052828] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2694.083817] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2694.086868] Suspending console(s) (use no_console_suspend to debug)
[ 2694.102580] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2694.102619] mdss_dsi_event_handler+:event=7
[ 2694.102627] mdss_dsi_event_handler: unhandled event=7
[ 2694.102633] mdss_dsi_event_handler-:event=7, rc=0
[ 2694.102648] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2694.104688] [apds9130_suspend] Enter
[ 2694.104689] [Touch] mxt_suspend 
[ 2694.104732] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2694.104737] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2694.104743] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2694.104754] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2694.106996] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2694.107010] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2694.107021] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2694.107040] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2694.107050] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2694.119375] PM: Some devices failed to suspend
[ 2694.120069] qpnp_chg_resume: DEBUG_____chg_resume
[ 2694.120423] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2694.125121] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2694.125398] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2694.125817] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2694.126346] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2694.126527] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2694.126533] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2694.126542] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2694.141173] [Touch] mxt_resume 
[ 2694.151001] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2694.151009] mdss_dsi_event_handler: unhandled event=8
[ 2694.151015] mdss_dsi_event_handler-:event=8, rc=0
[ 2694.152362] tspdrv: !  tspdrv: resume.
[ 2694.386556] PM: resume of devices complete after 267.154 msecs
[ 2694.423816] pn544:IRQ GPIO = 0
[ 2694.391938] Restarting tasks ... done.
[ 2694.439686] PM: suspend exit 2017-02-06 18:19:23.416544413 UTC
[ 2694.539984] PM: suspend entry 2017-02-06 18:19:23.516832176 UTC
[ 2694.540024] PM: Syncing filesystems ... done.
[ 2694.551465] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2694.610079] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2694.612165] Suspending console(s) (use no_console_suspend to debug)
[ 2694.621176] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2694.621197] mdss_dsi_event_handler+:event=7
[ 2694.621202] mdss_dsi_event_handler: unhandled event=7
[ 2694.621204] mdss_dsi_event_handler-:event=7, rc=0
[ 2694.621212] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2694.622504] [apds9130_suspend] Enter
[ 2694.622505] [Touch] mxt_suspend 
[ 2694.622527] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2694.622530] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2694.622533] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2694.622539] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2694.623722] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2694.623729] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2694.623734] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2694.623744] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2694.623749] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2694.637494] PM: Some devices failed to suspend
[ 2694.637890] qpnp_chg_resume: DEBUG_____chg_resume
[ 2694.638230] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2694.640542] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2694.640592] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2694.640718] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2694.641008] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2694.641011] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2694.641014] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2694.641018] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2694.653824] [Touch] mxt_resume 
[ 2694.663998] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2694.664003] mdss_dsi_event_handler: unhandled event=8
[ 2694.664006] mdss_dsi_event_handler-:event=8, rc=0
[ 2694.664686] tspdrv: !  tspdrv: resume.
[ 2694.897657] PM: resume of devices complete after 260.138 msecs
[ 2694.934786] pn544:IRQ GPIO = 0
[ 2694.903037] Restarting tasks ... done.
[ 2694.949010] PM: suspend exit 2017-02-06 18:19:23.925859362 UTC
[ 2695.050340] PM: suspend entry 2017-02-06 18:19:24.027210562 UTC
[ 2695.050354] PM: Syncing filesystems ... done.
[ 2695.053784] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2695.085294] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2695.088338] Suspending console(s) (use no_console_suspend to debug)
[ 2695.104022] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2695.104060] mdss_dsi_event_handler+:event=7
[ 2695.104068] mdss_dsi_event_handler: unhandled event=7
[ 2695.104074] mdss_dsi_event_handler-:event=7, rc=0
[ 2695.104089] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2695.106165] [apds9130_suspend] Enter
[ 2695.106167] [Touch] mxt_suspend 
[ 2695.106209] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2695.106214] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2695.106220] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2695.106230] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2695.108428] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2695.108441] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2695.108453] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2695.108471] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2695.108481] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2695.120486] PM: Some devices failed to suspend
[ 2695.121181] qpnp_chg_resume: DEBUG_____chg_resume
[ 2695.121543] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2695.126169] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2695.126446] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2695.126864] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2695.127394] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2695.127400] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2695.127405] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2695.127414] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2695.142016] [Touch] mxt_resume 
[ 2695.154378] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2695.154387] mdss_dsi_event_handler: unhandled event=8
[ 2695.154393] mdss_dsi_event_handler-:event=8, rc=0
[ 2695.157161] tspdrv: !  tspdrv: resume.
[ 2695.395307] PM: resume of devices complete after 274.793 msecs
[ 2695.432538] pn544:IRQ GPIO = 0
[ 2695.400692] Restarting tasks ... done.
[ 2695.448573] PM: suspend exit 2017-02-06 18:19:24.425426758 UTC
[ 2695.465337] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2695.465505] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2695.465560] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2695.465690] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2695.549884] PM: suspend entry 2017-02-06 18:19:24.526754471 UTC
[ 2695.549897] PM: Syncing filesystems ... done.
[ 2695.553330] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2695.584644] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2695.587753] Suspending console(s) (use no_console_suspend to debug)
[ 2695.603372] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2695.603411] mdss_dsi_event_handler+:event=7
[ 2695.603419] mdss_dsi_event_handler: unhandled event=7
[ 2695.603425] mdss_dsi_event_handler-:event=7, rc=0
[ 2695.603439] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2695.605474] [apds9130_suspend] Enter
[ 2695.605476] [Touch] mxt_suspend 
[ 2695.605518] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2695.605523] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2695.605529] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2695.605539] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2695.607737] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2695.607750] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2695.607761] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2695.607778] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2695.607788] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2695.619839] PM: Some devices failed to suspend
[ 2695.620527] qpnp_chg_resume: DEBUG_____chg_resume
[ 2695.620883] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2695.625397] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2695.625497] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2695.625911] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2695.626615] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2695.626621] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2695.626626] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2695.626635] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2695.641296] [Touch] mxt_resume 
[ 2695.651056] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2695.651064] mdss_dsi_event_handler: unhandled event=8
[ 2695.651070] mdss_dsi_event_handler-:event=8, rc=0
[ 2695.652396] tspdrv: !  tspdrv: resume.
[ 2695.884055] PM: resume of devices complete after 264.188 msecs
[ 2695.921399] pn544:IRQ GPIO = 0
[ 2695.889634] Restarting tasks ... done.
[ 2695.934917] PM: suspend exit 2017-02-06 18:19:24.911766288 UTC
[ 2696.039065] PM: suspend entry 2017-02-06 18:19:25.015936043 UTC
[ 2696.039079] PM: Syncing filesystems ... done.
[ 2696.042521] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2696.088833] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2696.093489] Suspending console(s) (use no_console_suspend to debug)
[ 2696.105288] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2696.105306] mdss_dsi_event_handler+:event=7
[ 2696.105310] mdss_dsi_event_handler: unhandled event=7
[ 2696.105313] mdss_dsi_event_handler-:event=7, rc=0
[ 2696.105321] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2696.106585] [apds9130_suspend] Enter
[ 2696.106586] [Touch] mxt_suspend 
[ 2696.106608] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2696.106611] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2696.106614] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2696.106620] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2696.107776] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2696.107782] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2696.107788] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2696.107797] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2696.107802] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2696.121289] PM: Some devices failed to suspend
[ 2696.121673] qpnp_chg_resume: DEBUG_____chg_resume
[ 2696.121892] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2696.124339] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2696.124389] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2696.124512] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2696.124801] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2696.124804] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2696.124807] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2696.124811] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2696.137593] [Touch] mxt_resume 
[ 2696.145965] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2696.145969] mdss_dsi_event_handler: unhandled event=8
[ 2696.145972] mdss_dsi_event_handler-:event=8, rc=0
[ 2696.149060] tspdrv: !  tspdrv: resume.
[ 2696.382827] PM: resume of devices complete after 261.512 msecs
[ 2696.420224] pn544:IRQ GPIO = 0
[ 2696.388355] Restarting tasks ... done.
[ 2696.436313] PM: suspend exit 2017-02-06 18:19:25.413166133 UTC
[ 2696.537824] PM: suspend entry 2017-02-06 18:19:25.514694675 UTC
[ 2696.537837] PM: Syncing filesystems ... done.
[ 2696.551535] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2696.605190] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2696.607261] Suspending console(s) (use no_console_suspend to debug)
[ 2696.616151] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2696.616172] mdss_dsi_event_handler+:event=7
[ 2696.616175] mdss_dsi_event_handler: unhandled event=7
[ 2696.616178] mdss_dsi_event_handler-:event=7, rc=0
[ 2696.616187] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2696.617447] [apds9130_suspend] Enter
[ 2696.617448] [Touch] mxt_suspend 
[ 2696.617470] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2696.617473] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2696.617476] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2696.617481] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2696.618639] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2696.618645] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2696.618651] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2696.618660] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2696.618665] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2696.632574] PM: Some devices failed to suspend
[ 2696.632965] qpnp_chg_resume: DEBUG_____chg_resume
[ 2696.633184] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2696.635627] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2696.635678] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2696.635803] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2696.636091] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2696.636094] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2696.636097] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2696.636101] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2696.648888] [Touch] mxt_resume 
[ 2696.659119] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2696.659123] mdss_dsi_event_handler: unhandled event=8
[ 2696.659126] mdss_dsi_event_handler-:event=8, rc=0
[ 2696.659804] tspdrv: !  tspdrv: resume.
[ 2696.896562] PM: resume of devices complete after 263.962 msecs
[ 2696.933873] pn544:IRQ GPIO = 0
[ 2696.901941] Restarting tasks ... done.
[ 2696.949049] PM: suspend exit 2017-02-06 18:19:25.925922486 UTC
[ 2696.973525] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2696.973583] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2696.973598] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2696.973636] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2697.050343] PM: suspend entry 2017-02-06 18:19:26.027213370 UTC
[ 2697.050357] PM: Syncing filesystems ... done.
[ 2697.053790] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2697.092274] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2697.096964] Suspending console(s) (use no_console_suspend to debug)
[ 2697.113841] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2697.113861] mdss_dsi_event_handler+:event=7
[ 2697.113865] mdss_dsi_event_handler: unhandled event=7
[ 2697.113868] mdss_dsi_event_handler-:event=7, rc=0
[ 2697.113875] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2697.115072] [apds9130_suspend] Enter
[ 2697.115072] [Touch] mxt_suspend 
[ 2697.115094] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2697.115097] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2697.115100] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2697.115106] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2697.116295] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2697.116301] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2697.116307] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2697.116316] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2697.116322] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2697.129915] PM: Some devices failed to suspend
[ 2697.130310] qpnp_chg_resume: DEBUG_____chg_resume
[ 2697.130651] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2697.132962] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2697.133012] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2697.133136] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2697.133427] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2697.133429] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2697.133433] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2697.133437] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2697.145750] [Touch] mxt_resume 
[ 2697.154818] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2697.154822] mdss_dsi_event_handler: unhandled event=8
[ 2697.154825] mdss_dsi_event_handler-:event=8, rc=0
[ 2697.156497] tspdrv: !  tspdrv: resume.
[ 2697.390101] PM: resume of devices complete after 260.160 msecs
[ 2697.427537] pn544:IRQ GPIO = 0
[ 2697.395763] Restarting tasks ... done.
[ 2697.441121] PM: suspend exit 2017-02-06 18:19:26.417971705 UTC
[ 2697.542488] PM: suspend entry 2017-02-06 18:19:26.519358580 UTC
[ 2697.542501] PM: Syncing filesystems ... done.
[ 2697.545978] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2697.583158] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2697.587142] Suspending console(s) (use no_console_suspend to debug)
[ 2697.607288] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2697.607307] mdss_dsi_event_handler+:event=7
[ 2697.607311] mdss_dsi_event_handler: unhandled event=7
[ 2697.607314] mdss_dsi_event_handler-:event=7, rc=0
[ 2697.607321] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2697.608586] [apds9130_suspend] Enter
[ 2697.608587] [Touch] mxt_suspend 
[ 2697.608609] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2697.608611] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2697.608614] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2697.608620] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2697.609779] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2697.609785] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2697.609791] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2697.609800] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2697.609805] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2697.620600] PM: Some devices failed to suspend
[ 2697.620991] qpnp_chg_resume: DEBUG_____chg_resume
[ 2697.621210] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2697.623644] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2697.623695] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2697.623817] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2697.624108] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2697.624111] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2697.624114] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2697.624118] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2697.636896] [Touch] mxt_resume 
[ 2697.645468] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2697.645472] mdss_dsi_event_handler: unhandled event=8
[ 2697.645475] mdss_dsi_event_handler-:event=8, rc=0
[ 2697.648887] tspdrv: !  tspdrv: resume.
[ 2697.883237] PM: resume of devices complete after 262.611 msecs
[ 2697.920511] pn544:IRQ GPIO = 0
[ 2697.888726] Restarting tasks ... done.
[ 2697.936354] PM: suspend exit 2017-02-06 18:19:26.913208528 UTC
[ 2698.037660] PM: suspend entry 2017-02-06 18:19:27.014530092 UTC
[ 2698.037673] PM: Syncing filesystems ... done.
[ 2698.041110] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2698.071198] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2698.074243] Suspending console(s) (use no_console_suspend to debug)
[ 2698.089941] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2698.089980] mdss_dsi_event_handler+:event=7
[ 2698.089988] mdss_dsi_event_handler: unhandled event=7
[ 2698.089994] mdss_dsi_event_handler-:event=7, rc=0
[ 2698.090010] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2698.092049] [apds9130_suspend] Enter
[ 2698.092051] [Touch] mxt_suspend 
[ 2698.092094] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2698.092098] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2698.092104] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2698.092115] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2698.094323] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2698.094337] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2698.094349] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2698.094366] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2698.094377] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2698.106272] PM: Some devices failed to suspend
[ 2698.106793] qpnp_chg_resume: DEBUG_____chg_resume
[ 2698.107116] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2698.112142] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2698.112419] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2698.112844] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2698.113371] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2698.113376] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2698.113382] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2698.113391] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2698.127971] [Touch] mxt_resume 
[ 2698.140916] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2698.140924] mdss_dsi_event_handler: unhandled event=8
[ 2698.140930] mdss_dsi_event_handler-:event=8, rc=0
[ 2698.145465] tspdrv: !  tspdrv: resume.
[ 2698.375940] PM: resume of devices complete after 269.640 msecs
[ 2698.413073] pn544:IRQ GPIO = 0
[ 2698.381323] Restarting tasks ... done.
[ 2698.429064] PM: suspend exit 2017-02-06 18:19:27.405921184 UTC
[ 2698.473633] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2698.473780] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2698.473824] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2698.473928] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2698.529372] PM: suspend entry 2017-02-06 18:19:27.506227068 UTC
[ 2698.529405] PM: Syncing filesystems ... done.
[ 2698.539131] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2698.589679] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2698.592721] Suspending console(s) (use no_console_suspend to debug)
[ 2698.606338] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2698.606377] mdss_dsi_event_handler+:event=7
[ 2698.606385] mdss_dsi_event_handler: unhandled event=7
[ 2698.606391] mdss_dsi_event_handler-:event=7, rc=0
[ 2698.606406] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2698.608432] [apds9130_suspend] Enter
[ 2698.608434] [Touch] mxt_suspend 
[ 2698.608477] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2698.608483] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2698.608488] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2698.608499] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2698.610698] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2698.610711] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2698.610722] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2698.610740] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2698.610750] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2698.618883] PM: Some devices failed to suspend
[ 2698.619571] qpnp_chg_resume: DEBUG_____chg_resume
[ 2698.619930] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2698.624119] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2698.624393] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2698.624815] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2698.625626] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2698.625631] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2698.625637] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2698.625646] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2698.640319] [Touch] mxt_resume 
[ 2698.651067] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2698.651075] mdss_dsi_event_handler: unhandled event=8
[ 2698.651081] mdss_dsi_event_handler-:event=8, rc=0
[ 2698.652428] tspdrv: !  tspdrv: resume.
[ 2698.886554] PM: resume of devices complete after 267.643 msecs
[ 2698.923613] pn544:IRQ GPIO = 0
[ 2698.891928] Restarting tasks ... done.
[ 2698.939626] PM: suspend exit 2017-02-06 18:19:27.916482746 UTC
[ 2699.041186] PM: suspend entry 2017-02-06 18:19:28.018045506 UTC
[ 2699.041212] PM: Syncing filesystems ... done.
[ 2699.048631] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2699.090339] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2699.093384] Suspending console(s) (use no_console_suspend to debug)
[ 2699.107115] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2699.107153] mdss_dsi_event_handler+:event=7
[ 2699.107161] mdss_dsi_event_handler: unhandled event=7
[ 2699.107167] mdss_dsi_event_handler-:event=7, rc=0
[ 2699.107181] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2699.109211] [apds9130_suspend] Enter
[ 2699.109212] [Touch] mxt_suspend 
[ 2699.109254] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2699.109259] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2699.109265] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2699.109275] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2699.111458] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2699.111471] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2699.111482] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2699.111500] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2699.111511] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2699.119570] PM: Some devices failed to suspend
[ 2699.120260] qpnp_chg_resume: DEBUG_____chg_resume
[ 2699.120613] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2699.124811] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2699.125470] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2699.125897] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2699.126425] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2699.126431] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2699.126437] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2699.126445] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2699.132137] [Touch] mxt_resume 
[ 2699.143052] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2699.143061] mdss_dsi_event_handler: unhandled event=8
[ 2699.143067] mdss_dsi_event_handler-:event=8, rc=0
[ 2699.144415] tspdrv: !  tspdrv: resume.
[ 2699.384058] PM: resume of devices complete after 264.460 msecs
[ 2699.421333] pn544:IRQ GPIO = 0
[ 2699.389639] Restarting tasks ... done.
[ 2699.437314] PM: suspend exit 2017-02-06 18:19:28.414185350 UTC
[ 2699.538580] PM: suspend entry 2017-02-06 18:19:28.515451287 UTC
[ 2699.538594] PM: Syncing filesystems ... done.
[ 2699.542027] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2699.571685] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2699.574721] Suspending console(s) (use no_console_suspend to debug)
[ 2699.590437] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2699.590477] mdss_dsi_event_handler+:event=7
[ 2699.590485] mdss_dsi_event_handler: unhandled event=7
[ 2699.590490] mdss_dsi_event_handler-:event=7, rc=0
[ 2699.590505] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2699.592547] [apds9130_suspend] Enter
[ 2699.592548] [Touch] mxt_suspend 
[ 2699.592591] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2699.592596] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2699.592602] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2699.592612] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2699.594811] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2699.594824] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2699.594835] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2699.594853] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2699.594864] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2699.606836] PM: Some devices failed to suspend
[ 2699.607543] qpnp_chg_resume: DEBUG_____chg_resume
[ 2699.607913] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2699.612550] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2699.612822] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2699.613243] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2699.613766] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2699.613771] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2699.613777] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2699.613785] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2699.628348] [Touch] mxt_resume 
[ 2699.640951] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2699.640959] mdss_dsi_event_handler: unhandled event=8
[ 2699.640965] mdss_dsi_event_handler-:event=8, rc=0
[ 2699.645491] tspdrv: !  tspdrv: resume.
[ 2699.874172] PM: resume of devices complete after 267.307 msecs
[ 2699.911510] pn544:IRQ GPIO = 0
[ 2699.879755] Restarting tasks ... done.
[ 2699.927843] PM: suspend exit 2017-02-06 18:19:28.904715193 UTC
[ 2699.974651] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2699.974709] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2699.974724] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2699.974762] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2700.028806] PM: suspend entry 2017-02-06 18:19:29.005675974 UTC
[ 2700.028819] PM: Syncing filesystems ... done.
[ 2700.032248] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2700.061728] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2700.064767] Suspending console(s) (use no_console_suspend to debug)
[ 2700.080500] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2700.080539] mdss_dsi_event_handler+:event=7
[ 2700.080546] mdss_dsi_event_handler: unhandled event=7
[ 2700.080552] mdss_dsi_event_handler-:event=7, rc=0
[ 2700.080567] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2700.082606] [apds9130_suspend] Enter
[ 2700.082607] [Touch] mxt_suspend 
[ 2700.082650] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2700.082655] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2700.082660] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2700.082671] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2700.084869] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2700.084882] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2700.084893] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2700.084911] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2700.084921] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2700.096910] PM: Some devices failed to suspend
[ 2700.097602] qpnp_chg_resume: DEBUG_____chg_resume
[ 2700.097961] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2700.102620] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2700.102897] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2700.103317] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2700.103841] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2700.103846] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2700.103852] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2700.103860] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2700.118419] [Touch] mxt_resume 
[ 2700.131318] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2700.131326] mdss_dsi_event_handler: unhandled event=8
[ 2700.131333] mdss_dsi_event_handler-:event=8, rc=0
[ 2700.135787] tspdrv: !  tspdrv: resume.
[ 2700.364022] PM: resume of devices complete after 267.084 msecs
[ 2700.401324] pn544:IRQ GPIO = 0
[ 2700.369595] Restarting tasks ... done.
[ 2700.414861] PM: suspend exit 2017-02-06 18:19:29.391709255 UTC
[ 2700.516134] PM: suspend entry 2017-02-06 18:19:29.493004415 UTC
[ 2700.516147] PM: Syncing filesystems ... done.
[ 2700.519577] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2700.539111] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2700.542188] Suspending console(s) (use no_console_suspend to debug)
[ 2700.557952] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2700.557993] mdss_dsi_event_handler+:event=7
[ 2700.558000] mdss_dsi_event_handler: unhandled event=7
[ 2700.558007] mdss_dsi_event_handler-:event=7, rc=0
[ 2700.558021] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2700.560116] [apds9130_suspend] Enter
[ 2700.560117] [Touch] mxt_suspend 
[ 2700.560161] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2700.560166] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2700.560172] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2700.560182] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2700.562429] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2700.562443] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2700.562454] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2700.562472] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2700.562482] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2700.574408] PM: Some devices failed to suspend
[ 2700.575182] qpnp_chg_resume: DEBUG_____chg_resume
[ 2700.575538] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2700.579654] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2700.579930] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2700.580356] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2700.580889] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2700.580895] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2700.580901] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2700.580910] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2700.595650] [Touch] mxt_resume 
[ 2700.606884] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2700.606892] mdss_dsi_event_handler: unhandled event=8
[ 2700.606898] mdss_dsi_event_handler-:event=8, rc=0
[ 2700.611734] tspdrv: !  tspdrv: resume.
[ 2700.845377] PM: resume of devices complete after 270.940 msecs
[ 2700.882377] pn544:IRQ GPIO = 0
[ 2700.850764] Restarting tasks ... done.
[ 2700.897530] PM: suspend exit 2017-02-06 18:19:29.874402329 UTC
[ 2700.998789] PM: suspend entry 2017-02-06 18:19:29.975658895 UTC
[ 2700.998802] PM: Syncing filesystems ... done.
[ 2701.002229] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2701.031745] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2701.034786] Suspending console(s) (use no_console_suspend to debug)
[ 2701.050453] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2701.050492] mdss_dsi_event_handler+:event=7
[ 2701.050499] mdss_dsi_event_handler: unhandled event=7
[ 2701.050506] mdss_dsi_event_handler-:event=7, rc=0
[ 2701.050521] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2701.052550] [apds9130_suspend] Enter
[ 2701.052552] [Touch] mxt_suspend 
[ 2701.052595] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2701.052600] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2701.052606] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2701.052616] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2701.054812] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2701.054825] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2701.054837] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2701.054855] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2701.054865] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2701.066896] PM: Some devices failed to suspend
[ 2701.067582] qpnp_chg_resume: DEBUG_____chg_resume
[ 2701.067939] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2701.072599] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2701.072875] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2701.073293] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2701.073818] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2701.073824] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2701.073829] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2701.073838] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2701.088398] [Touch] mxt_resume 
[ 2701.101295] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2701.101303] mdss_dsi_event_handler: unhandled event=8
[ 2701.101309] mdss_dsi_event_handler-:event=8, rc=0
[ 2701.105667] tspdrv: !  tspdrv: resume.
[ 2701.333762] PM: resume of devices complete after 266.838 msecs
[ 2701.371019] pn544:IRQ GPIO = 0
[ 2701.339258] Restarting tasks ... done.
[ 2701.386548] PM: suspend exit 2017-02-06 18:19:30.363399568 UTC
[ 2701.475481] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2701.475540] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2701.475555] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2701.475592] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2701.486717] PM: suspend entry 2017-02-06 18:19:30.463588684 UTC
[ 2701.486729] PM: Syncing filesystems ... done.
[ 2701.490148] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2701.510869] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2701.513923] Suspending console(s) (use no_console_suspend to debug)
[ 2701.529729] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2701.529769] mdss_dsi_event_handler+:event=7
[ 2701.529777] mdss_dsi_event_handler: unhandled event=7
[ 2701.529784] mdss_dsi_event_handler-:event=7, rc=0
[ 2701.529799] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2701.531882] [apds9130_suspend] Enter
[ 2701.531883] [Touch] mxt_suspend 
[ 2701.531927] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2701.531932] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2701.531938] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2701.531949] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2701.534185] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2701.534198] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2701.534209] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2701.534228] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2701.534239] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2701.545927] PM: Some devices failed to suspend
[ 2701.546639] qpnp_chg_resume: DEBUG_____chg_resume
[ 2701.547001] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2701.551629] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2701.551905] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2701.552326] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2701.552860] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2701.552865] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2701.552871] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2701.552879] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2701.567597] [Touch] mxt_resume 
[ 2701.578005] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2701.578012] mdss_dsi_event_handler: unhandled event=8
[ 2701.578018] mdss_dsi_event_handler-:event=8, rc=0
[ 2701.582711] tspdrv: !  tspdrv: resume.
[ 2701.813825] PM: resume of devices complete after 267.871 msecs
[ 2701.851128] pn544:IRQ GPIO = 0
[ 2701.819403] Restarting tasks ... done.
[ 2701.864670] PM: suspend exit 2017-02-06 18:19:30.841518890 UTC
[ 2701.965933] PM: suspend entry 2017-02-06 18:19:30.942803113 UTC
[ 2701.965946] PM: Syncing filesystems ... done.
[ 2701.969379] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2701.988909] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2701.991979] Suspending console(s) (use no_console_suspend to debug)
[ 2702.007751] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2702.007791] mdss_dsi_event_handler+:event=7
[ 2702.007798] mdss_dsi_event_handler: unhandled event=7
[ 2702.007804] mdss_dsi_event_handler-:event=7, rc=0
[ 2702.007819] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2702.009914] [apds9130_suspend] Enter
[ 2702.009915] [Touch] mxt_suspend 
[ 2702.009960] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2702.009964] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2702.009970] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2702.009980] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2702.012217] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2702.012230] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2702.012240] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2702.012259] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2702.012269] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2702.024149] PM: Some devices failed to suspend
[ 2702.024865] qpnp_chg_resume: DEBUG_____chg_resume
[ 2702.025283] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.029859] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.030137] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.030561] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.031093] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2702.031098] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2702.031104] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2702.031112] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2702.045851] [Touch] mxt_resume 
[ 2702.056902] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2702.056910] mdss_dsi_event_handler: unhandled event=8
[ 2702.056916] mdss_dsi_event_handler-:event=8, rc=0
[ 2702.061750] tspdrv: !  tspdrv: resume.
[ 2702.293718] PM: resume of devices complete after 269.541 msecs
[ 2702.331143] pn544:IRQ GPIO = 0
[ 2702.299342] Restarting tasks ... done.
[ 2702.344710] PM: suspend exit 2017-02-06 18:19:31.321559202 UTC
[ 2702.445965] PM: suspend entry 2017-02-06 18:19:31.422835922 UTC
[ 2702.445979] PM: Syncing filesystems ... done.
[ 2702.449411] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2702.468937] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2702.471997] Suspending console(s) (use no_console_suspend to debug)
[ 2702.488019] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2702.488060] mdss_dsi_event_handler+:event=7
[ 2702.488068] mdss_dsi_event_handler: unhandled event=7
[ 2702.488074] mdss_dsi_event_handler-:event=7, rc=0
[ 2702.488089] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2702.490178] [apds9130_suspend] Enter
[ 2702.490180] [Touch] mxt_suspend 
[ 2702.490223] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2702.490228] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2702.490234] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2702.490244] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2702.492490] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2702.492504] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2702.492515] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2702.492534] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2702.492544] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2702.504516] PM: Some devices failed to suspend
[ 2702.505288] qpnp_chg_resume: DEBUG_____chg_resume
[ 2702.505645] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.509795] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.510071] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.510496] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.511023] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2702.511028] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2702.511034] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2702.511042] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2702.525764] [Touch] mxt_resume 
[ 2702.536892] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2702.536900] mdss_dsi_event_handler: unhandled event=8
[ 2702.536906] mdss_dsi_event_handler-:event=8, rc=0
[ 2702.541740] tspdrv: !  tspdrv: resume.
[ 2702.773950] PM: resume of devices complete after 269.407 msecs
[ 2702.811218] pn544:IRQ GPIO = 0
[ 2702.779524] Restarting tasks ... done.
[ 2702.824745] PM: suspend exit 2017-02-06 18:19:31.801593682 UTC
[ 2702.925437] PM: suspend entry 2017-02-06 18:19:31.902308162 UTC
[ 2702.925451] PM: Syncing filesystems ... done.
[ 2702.928889] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2702.948432] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2702.951492] Suspending console(s) (use no_console_suspend to debug)
[ 2702.967369] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2702.967410] mdss_dsi_event_handler+:event=7
[ 2702.967418] mdss_dsi_event_handler: unhandled event=7
[ 2702.967424] mdss_dsi_event_handler-:event=7, rc=0
[ 2702.967439] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2702.969537] [apds9130_suspend] Enter
[ 2702.969538] [Touch] mxt_suspend 
[ 2702.969582] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2702.969587] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2702.969593] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2702.969603] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2702.971842] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2702.971854] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2702.971865] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2702.971883] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2702.971894] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2702.981995] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2702.982077] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2702.982186] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2702.982252] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2702.983660] PM: Some devices failed to suspend
[ 2702.984384] qpnp_chg_resume: DEBUG_____chg_resume
[ 2702.984749] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.989373] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.989648] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.990070] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2702.990609] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2702.990614] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2702.990621] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2702.990629] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2703.005324] [Touch] mxt_resume 
[ 2703.016866] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2703.016874] mdss_dsi_event_handler: unhandled event=8
[ 2703.016880] mdss_dsi_event_handler-:event=8, rc=0
[ 2703.021726] tspdrv: !  tspdrv: resume.
[ 2703.253644] PM: resume of devices complete after 269.956 msecs
[ 2703.290899] pn544:IRQ GPIO = 0
[ 2703.259184] Restarting tasks ... done.
[ 2703.306458] PM: suspend exit 2017-02-06 18:19:32.283308370 UTC
[ 2703.407646] PM: suspend entry 2017-02-06 18:19:32.384516654 UTC
[ 2703.407660] PM: Syncing filesystems ... done.
[ 2703.411096] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2703.441152] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2703.444197] Suspending console(s) (use no_console_suspend to debug)
[ 2703.459882] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2703.459923] mdss_dsi_event_handler+:event=7
[ 2703.459931] mdss_dsi_event_handler: unhandled event=7
[ 2703.459937] mdss_dsi_event_handler-:event=7, rc=0
[ 2703.459952] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2703.461987] [apds9130_suspend] Enter
[ 2703.461988] [Touch] mxt_suspend 
[ 2703.462030] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2703.462035] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2703.462041] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2703.462051] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2703.464241] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2703.464253] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2703.464265] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2703.464283] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2703.464294] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2703.476264] PM: Some devices failed to suspend
[ 2703.476960] qpnp_chg_resume: DEBUG_____chg_resume
[ 2703.477318] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2703.481973] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2703.482249] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2703.482667] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2703.483194] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2703.483199] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2703.483205] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2703.483213] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2703.497803] [Touch] mxt_resume 
[ 2703.507908] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2703.507916] mdss_dsi_event_handler: unhandled event=8
[ 2703.507922] mdss_dsi_event_handler-:event=8, rc=0
[ 2703.512590] tspdrv: !  tspdrv: resume.
[ 2703.744091] PM: resume of devices complete after 267.800 msecs
[ 2703.781387] pn544:IRQ GPIO = 0
[ 2703.749676] Restarting tasks ... done.
[ 2703.794911] PM: suspend exit 2017-02-06 18:19:32.771760140 UTC
[ 2703.898176] PM: suspend entry 2017-02-06 18:19:32.875046392 UTC
[ 2703.898190] PM: Syncing filesystems ... done.
[ 2703.901626] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2703.931653] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2703.934703] Suspending console(s) (use no_console_suspend to debug)
[ 2703.950425] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2703.950465] mdss_dsi_event_handler+:event=7
[ 2703.950473] mdss_dsi_event_handler: unhandled event=7
[ 2703.950479] mdss_dsi_event_handler-:event=7, rc=0
[ 2703.950495] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2703.952534] [apds9130_suspend] Enter
[ 2703.952535] [Touch] mxt_suspend 
[ 2703.952578] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2703.952583] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2703.952589] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2703.952599] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2703.954799] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2703.954812] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2703.954823] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2703.954841] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2703.954852] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2703.966824] PM: Some devices failed to suspend
[ 2703.967526] qpnp_chg_resume: DEBUG_____chg_resume
[ 2703.967887] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2703.972529] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2703.972804] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2703.973221] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2703.973747] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2703.973753] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2703.973759] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2703.973767] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2703.987680] [Touch] mxt_resume 
[ 2703.997924] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2703.997932] mdss_dsi_event_handler: unhandled event=8
[ 2703.997938] mdss_dsi_event_handler-:event=8, rc=0
[ 2704.002611] tspdrv: !  tspdrv: resume.
[ 2704.235915] PM: resume of devices complete after 269.063 msecs
[ 2704.274179] pn544:IRQ GPIO = 0
[ 2704.241302] Restarting tasks ... done.
[ 2704.290317] PM: suspend exit 2017-02-06 18:19:33.267173264 UTC
[ 2704.391221] PM: suspend entry 2017-02-06 18:19:33.368069047 UTC
[ 2704.391262] PM: Syncing filesystems ... done.
[ 2704.402740] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2704.462163] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2704.464232] Suspending console(s) (use no_console_suspend to debug)
[ 2704.473180] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2704.473200] mdss_dsi_event_handler+:event=7
[ 2704.473204] mdss_dsi_event_handler: unhandled event=7
[ 2704.473207] mdss_dsi_event_handler-:event=7, rc=0
[ 2704.473216] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2704.474386] [apds9130_suspend] Enter
[ 2704.474387] [Touch] mxt_suspend 
[ 2704.474409] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2704.474412] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2704.474415] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2704.474420] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2704.475621] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2704.475628] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2704.475633] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2704.475643] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2704.475648] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2704.482189] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2704.482231] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2704.482240] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2704.482273] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2704.489555] PM: Some devices failed to suspend
[ 2704.489952] qpnp_chg_resume: DEBUG_____chg_resume
[ 2704.490290] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2704.492599] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2704.492650] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2704.492778] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2704.493069] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2704.493072] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2704.493075] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2704.493079] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2704.505753] [Touch] mxt_resume 
[ 2704.514819] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2704.514823] mdss_dsi_event_handler: unhandled event=8
[ 2704.514827] mdss_dsi_event_handler-:event=8, rc=0
[ 2704.516539] tspdrv: !  tspdrv: resume.
[ 2704.749205] PM: resume of devices complete after 259.623 msecs
[ 2704.786319] pn544:IRQ GPIO = 0
[ 2704.754632] Restarting tasks ... done.
[ 2704.800524] PM: suspend exit 2017-02-06 18:19:33.777374150 UTC
[ 2705.044954] BMS: adjust_soc: ibat_ua = 59803, vbat_uv = 3757068, ocv_est_uv = 3768310, pc_est = 36, soc_est = 31, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2705.062010] New_cal_SOC = 43, SOC = 43, batt_temp = 289, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 202731, iavg_ua = 102060
[ 2705.062153] PM: suspend entry 2017-02-06 18:19:34.039009723 UTC
[ 2705.062180] PM: Syncing filesystems ... done.
[ 2705.072813] Freezing user space processes ... (elapsed 0.06 seconds) done.
[ 2705.133305] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2705.138343] Suspending console(s) (use no_console_suspend to debug)
[ 2705.164350] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2705.164405] mdss_dsi_event_handler+:event=7
[ 2705.164416] mdss_dsi_event_handler: unhandled event=7
[ 2705.164426] mdss_dsi_event_handler-:event=7, rc=0
[ 2705.164448] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2705.167309] [apds9130_suspend] Enter
[ 2705.167310] [Touch] mxt_suspend 
[ 2705.167375] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2705.167383] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2705.167392] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2705.167407] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2705.170722] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2705.170743] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2705.170759] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2705.170786] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2705.170803] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2705.179122] PM: Some devices failed to suspend
[ 2705.180395] qpnp_chg_resume: DEBUG_____chg_resume
[ 2705.181064] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2705.185636] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2705.186032] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2705.186870] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2705.187636] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2705.187645] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2705.187653] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2705.187665] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2705.203573] [Touch] mxt_resume 
[ 2705.215800] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2705.215813] mdss_dsi_event_handler: unhandled event=8
[ 2705.215822] mdss_dsi_event_handler-:event=8, rc=0
[ 2705.221218] tspdrv: !  tspdrv: resume.
[ 2705.445685] PM: resume of devices complete after 266.534 msecs
[ 2705.482812] pn544:IRQ GPIO = 0
[ 2705.451067] Restarting tasks ... done.
[ 2705.498875] PM: suspend exit 2017-02-06 18:19:34.475748369 UTC
[ 2705.600171] PM: suspend entry 2017-02-06 18:19:34.577041914 UTC
[ 2705.600184] PM: Syncing filesystems ... done.
[ 2705.603614] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2705.634731] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2705.637846] Suspending console(s) (use no_console_suspend to debug)
[ 2705.653487] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2705.653528] mdss_dsi_event_handler+:event=7
[ 2705.653535] mdss_dsi_event_handler: unhandled event=7
[ 2705.653541] mdss_dsi_event_handler-:event=7, rc=0
[ 2705.653556] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2705.655638] [apds9130_suspend] Enter
[ 2705.655639] [Touch] mxt_suspend 
[ 2705.655682] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2705.655686] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2705.655692] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2705.655703] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2705.657898] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2705.657912] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2705.657924] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2705.657941] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2705.657951] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2705.669920] PM: Some devices failed to suspend
[ 2705.670620] qpnp_chg_resume: DEBUG_____chg_resume
[ 2705.670980] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2705.675508] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2705.675609] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2705.676032] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2705.676732] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2705.676737] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2705.676743] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2705.676751] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2705.691420] [Touch] mxt_resume 
[ 2705.701001] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2705.701009] mdss_dsi_event_handler: unhandled event=8
[ 2705.701015] mdss_dsi_event_handler-:event=8, rc=0
[ 2705.702362] tspdrv: !  tspdrv: resume.
[ 2705.934044] PM: resume of devices complete after 264.096 msecs
[ 2705.971219] pn544:IRQ GPIO = 0
[ 2705.939608] Restarting tasks ... done.
[ 2705.984748] PM: suspend exit 2017-02-06 18:19:34.961597170 UTC
[ 2706.005725] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2706.005783] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2706.005798] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2706.005836] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2706.086002] PM: suspend entry 2017-02-06 18:19:35.062872587 UTC
[ 2706.086015] PM: Syncing filesystems ... done.
[ 2706.089438] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2706.108997] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2706.112069] Suspending console(s) (use no_console_suspend to debug)
[ 2706.127828] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2706.127870] mdss_dsi_event_handler+:event=7
[ 2706.127877] mdss_dsi_event_handler: unhandled event=7
[ 2706.127883] mdss_dsi_event_handler-:event=7, rc=0
[ 2706.127899] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2706.130004] [apds9130_suspend] Enter
[ 2706.130005] [Touch] mxt_suspend 
[ 2706.130048] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2706.130053] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2706.130059] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2706.130070] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2706.132322] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2706.132335] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2706.132346] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2706.132364] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2706.132375] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2706.144243] PM: Some devices failed to suspend
[ 2706.145038] qpnp_chg_resume: DEBUG_____chg_resume
[ 2706.145398] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2706.149525] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2706.149800] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2706.150223] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2706.150753] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2706.150758] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2706.150764] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2706.150773] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2706.165472] [Touch] mxt_resume 
[ 2706.176866] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2706.176874] mdss_dsi_event_handler: unhandled event=8
[ 2706.176880] mdss_dsi_event_handler-:event=8, rc=0
[ 2706.181716] tspdrv: !  tspdrv: resume.
[ 2706.415744] PM: resume of devices complete after 271.473 msecs
[ 2706.452860] pn544:IRQ GPIO = 0
[ 2706.421131] Restarting tasks ... done.
[ 2706.468823] PM: suspend exit 2017-02-06 18:19:35.445678941 UTC
[ 2706.570227] PM: suspend entry 2017-02-06 18:19:35.547073056 UTC
[ 2706.570266] PM: Syncing filesystems ... done.
[ 2706.581841] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2706.640773] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2706.642857] Suspending console(s) (use no_console_suspend to debug)
[ 2706.651869] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2706.651889] mdss_dsi_event_handler+:event=7
[ 2706.651893] mdss_dsi_event_handler: unhandled event=7
[ 2706.651896] mdss_dsi_event_handler-:event=7, rc=0
[ 2706.651904] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2706.653195] [apds9130_suspend] Enter
[ 2706.653196] [Touch] mxt_suspend 
[ 2706.653217] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2706.653220] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2706.653223] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2706.653229] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2706.654415] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2706.654421] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2706.654427] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2706.654436] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2706.654441] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2706.667797] PM: Some devices failed to suspend
[ 2706.668193] qpnp_chg_resume: DEBUG_____chg_resume
[ 2706.668412] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2706.670843] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2706.670894] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2706.671017] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2706.671309] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2706.671312] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2706.671315] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2706.671320] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2706.676657] [Touch] mxt_resume 
[ 2706.688736] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2706.688740] mdss_dsi_event_handler: unhandled event=8
[ 2706.688743] mdss_dsi_event_handler-:event=8, rc=0
[ 2706.689424] tspdrv: !  tspdrv: resume.
[ 2706.930861] PM: resume of devices complete after 263.037 msecs
[ 2706.968172] pn544:IRQ GPIO = 0
[ 2706.936398] Restarting tasks ... done.
[ 2706.982378] PM: suspend exit 2017-02-06 18:19:35.959227690 UTC
[ 2707.083812] PM: suspend entry 2017-02-06 18:19:36.060682482 UTC
[ 2707.083826] PM: Syncing filesystems ... done.
[ 2707.097615] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2707.140913] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2707.142995] Suspending console(s) (use no_console_suspend to debug)
[ 2707.152051] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2707.152072] mdss_dsi_event_handler+:event=7
[ 2707.152076] mdss_dsi_event_handler: unhandled event=7
[ 2707.152079] mdss_dsi_event_handler-:event=7, rc=0
[ 2707.152087] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2707.153371] [apds9130_suspend] Enter
[ 2707.153372] [Touch] mxt_suspend 
[ 2707.153395] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2707.153397] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2707.153400] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2707.153406] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2707.154585] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2707.154592] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2707.154597] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2707.154607] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2707.154612] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2707.167974] PM: Some devices failed to suspend
[ 2707.168373] qpnp_chg_resume: DEBUG_____chg_resume
[ 2707.168713] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2707.171018] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2707.171069] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2707.171194] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2707.171484] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2707.171487] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2707.171490] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2707.171495] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2707.176645] [Touch] mxt_resume 
[ 2707.188725] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2707.188730] mdss_dsi_event_handler: unhandled event=8
[ 2707.188733] mdss_dsi_event_handler-:event=8, rc=0
[ 2707.189414] tspdrv: !  tspdrv: resume.
[ 2707.427240] PM: resume of devices complete after 259.241 msecs
[ 2707.464457] pn544:IRQ GPIO = 0
[ 2707.432618] Restarting tasks ... done.
[ 2707.478695] PM: suspend exit 2017-02-06 18:19:36.455544253 UTC
[ 2707.513504] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2707.513563] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2707.513578] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2707.513616] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2707.580037] PM: suspend entry 2017-02-06 18:19:36.556907586 UTC
[ 2707.580051] PM: Syncing filesystems ... done.
[ 2707.583478] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2707.614553] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2707.617666] Suspending console(s) (use no_console_suspend to debug)
[ 2707.633286] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2707.633325] mdss_dsi_event_handler+:event=7
[ 2707.633333] mdss_dsi_event_handler: unhandled event=7
[ 2707.633339] mdss_dsi_event_handler-:event=7, rc=0
[ 2707.633353] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2707.635400] [apds9130_suspend] Enter
[ 2707.635401] [Touch] mxt_suspend 
[ 2707.635443] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2707.635448] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2707.635454] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2707.635465] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2707.637662] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2707.637676] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2707.637687] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2707.637705] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2707.637716] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2707.649747] PM: Some devices failed to suspend
[ 2707.650441] qpnp_chg_resume: DEBUG_____chg_resume
[ 2707.650799] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2707.655307] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2707.655409] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2707.655833] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2707.656541] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2707.656547] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2707.656553] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2707.656561] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2707.671240] [Touch] mxt_resume 
[ 2707.680976] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2707.680984] mdss_dsi_event_handler: unhandled event=8
[ 2707.680990] mdss_dsi_event_handler-:event=8, rc=0
[ 2707.682337] tspdrv: !  tspdrv: resume.
[ 2707.915639] PM: resume of devices complete after 265.864 msecs
[ 2707.952906] pn544:IRQ GPIO = 0
[ 2707.921022] Restarting tasks ... done.
[ 2707.968816] PM: suspend exit 2017-02-06 18:19:36.945670034 UTC
[ 2708.070148] PM: suspend entry 2017-02-06 18:19:37.047018992 UTC
[ 2708.070162] PM: Syncing filesystems ... done.
[ 2708.073594] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2708.092808] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2708.094890] Suspending console(s) (use no_console_suspend to debug)
[ 2708.103913] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2708.103934] mdss_dsi_event_handler+:event=7
[ 2708.103938] mdss_dsi_event_handler: unhandled event=7
[ 2708.103941] mdss_dsi_event_handler-:event=7, rc=0
[ 2708.103949] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2708.105272] [apds9130_suspend] Enter
[ 2708.105273] [Touch] mxt_suspend 
[ 2708.105295] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2708.105298] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2708.105301] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2708.105307] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2708.106489] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2708.106495] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2708.106501] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2708.106510] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2708.106516] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2708.120609] PM: Some devices failed to suspend
[ 2708.121052] qpnp_chg_resume: DEBUG_____chg_resume
[ 2708.121291] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2708.124124] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2708.124183] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2708.124462] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2708.124673] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2708.124677] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2708.124680] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2708.124685] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2708.137629] [Touch] mxt_resume 
[ 2708.145960] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2708.145965] mdss_dsi_event_handler: unhandled event=8
[ 2708.145968] mdss_dsi_event_handler-:event=8, rc=0
[ 2708.149544] tspdrv: !  tspdrv: resume.
[ 2708.384134] PM: resume of devices complete after 263.499 msecs
[ 2708.421465] pn544:IRQ GPIO = 0
[ 2708.389692] Restarting tasks ... done.
[ 2708.436648] PM: suspend exit 2017-02-06 18:19:37.413500191 UTC
[ 2708.538107] PM: suspend entry 2017-02-06 18:19:37.514978107 UTC
[ 2708.538121] PM: Syncing filesystems ... done.
[ 2708.541558] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2708.560829] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2708.562912] Suspending console(s) (use no_console_suspend to debug)
[ 2708.575748] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2708.575780] mdss_dsi_event_handler+:event=7
[ 2708.575786] mdss_dsi_event_handler: unhandled event=7
[ 2708.575791] mdss_dsi_event_handler-:event=7, rc=0
[ 2708.575803] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2708.577604] [apds9130_suspend] Enter
[ 2708.577605] [Touch] mxt_suspend 
[ 2708.577639] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2708.577643] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2708.577648] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2708.577656] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2708.579460] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2708.579471] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2708.579480] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2708.579496] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2708.579504] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2708.593290] PM: Some devices failed to suspend
[ 2708.593905] qpnp_chg_resume: DEBUG_____chg_resume
[ 2708.594023] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2708.598855] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2708.598932] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2708.599272] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2708.599705] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2708.599709] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2708.599714] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2708.599720] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2708.614261] [Touch] mxt_resume 
[ 2708.626078] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2708.626084] mdss_dsi_event_handler: unhandled event=8
[ 2708.626089] mdss_dsi_event_handler-:event=8, rc=0
[ 2708.627956] tspdrv: !  tspdrv: resume.
[ 2708.866546] PM: resume of devices complete after 273.229 msecs
[ 2708.903587] pn544:IRQ GPIO = 0
[ 2708.871919] Restarting tasks ... done.
[ 2708.918746] PM: suspend exit 2017-02-06 18:19:37.895617950 UTC
[ 2709.013496] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2709.013556] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2709.013570] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2709.013609] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2709.019324] PM: suspend entry 2017-02-06 18:19:37.996195294 UTC
[ 2709.019338] PM: Syncing filesystems ... done.
[ 2709.022768] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2709.053706] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2709.056750] Suspending console(s) (use no_console_suspend to debug)
[ 2709.072376] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2709.072416] mdss_dsi_event_handler+:event=7
[ 2709.072424] mdss_dsi_event_handler: unhandled event=7
[ 2709.072430] mdss_dsi_event_handler-:event=7, rc=0
[ 2709.072444] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2709.074492] [apds9130_suspend] Enter
[ 2709.074494] [Touch] mxt_suspend 
[ 2709.074536] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2709.074541] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2709.074547] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2709.074557] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2709.076799] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2709.076813] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2709.076824] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2709.076842] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2709.076852] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2709.088925] PM: Some devices failed to suspend
[ 2709.089621] qpnp_chg_resume: DEBUG_____chg_resume
[ 2709.089972] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2709.094632] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2709.094907] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2709.095367] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2709.095891] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2709.095897] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2709.095903] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2709.096083] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2709.110709] [Touch] mxt_resume 
[ 2709.121015] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2709.121022] mdss_dsi_event_handler: unhandled event=8
[ 2709.121028] mdss_dsi_event_handler-:event=8, rc=0
[ 2709.122376] tspdrv: !  tspdrv: resume.
[ 2709.355924] PM: resume of devices complete after 266.971 msecs
[ 2709.393483] pn544:IRQ GPIO = 0
[ 2709.361305] Restarting tasks ... done.
[ 2709.410611] PM: suspend exit 2017-02-06 18:19:38.387468575 UTC
[ 2709.511679] PM: suspend entry 2017-02-06 18:19:38.488539149 UTC
[ 2709.511705] PM: Syncing filesystems ... done.
[ 2709.530704] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2709.572756] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2709.575916] Suspending console(s) (use no_console_suspend to debug)
[ 2709.586321] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2709.586357] mdss_dsi_event_handler+:event=7
[ 2709.586364] mdss_dsi_event_handler: unhandled event=7
[ 2709.586370] mdss_dsi_event_handler-:event=7, rc=0
[ 2709.586385] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2709.590026] [apds9130_suspend] Enter
[ 2709.590027] [Touch] mxt_suspend 
[ 2709.590069] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2709.590073] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2709.590079] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2709.590089] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2709.593404] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2709.593418] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2709.593430] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2709.593448] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2709.593459] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2709.606167] PM: Some devices failed to suspend
[ 2709.606906] qpnp_chg_resume: DEBUG_____chg_resume
[ 2709.607268] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2709.611905] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2709.612193] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2709.612614] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2709.613148] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2709.613154] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2709.613160] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2709.613168] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2709.627933] [Touch] mxt_resume 
[ 2709.641017] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2709.641025] mdss_dsi_event_handler: unhandled event=8
[ 2709.641031] mdss_dsi_event_handler-:event=8, rc=0
[ 2709.645570] tspdrv: !  tspdrv: resume.
[ 2709.875892] PM: resume of devices complete after 269.696 msecs
[ 2709.912997] pn544:IRQ GPIO = 0
[ 2709.881277] Restarting tasks ... done.
[ 2709.929016] PM: suspend exit 2017-02-06 18:19:38.905871074 UTC
[ 2710.029996] PM: suspend entry 2017-02-06 18:19:39.006866180 UTC
[ 2710.030009] PM: Syncing filesystems ... done.
[ 2710.033561] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2710.064717] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2710.067926] Suspending console(s) (use no_console_suspend to debug)
[ 2710.083553] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2710.083593] mdss_dsi_event_handler+:event=7
[ 2710.083600] mdss_dsi_event_handler: unhandled event=7
[ 2710.083606] mdss_dsi_event_handler-:event=7, rc=0
[ 2710.083622] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2710.085702] [apds9130_suspend] Enter
[ 2710.085703] [Touch] mxt_suspend 
[ 2710.085745] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2710.085750] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2710.085756] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2710.085767] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2710.087962] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2710.087975] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2710.087987] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2710.088005] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2710.088015] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2710.099990] PM: Some devices failed to suspend
[ 2710.100688] qpnp_chg_resume: DEBUG_____chg_resume
[ 2710.101049] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2710.105568] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2710.105670] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2710.106082] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2710.106779] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2710.106785] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2710.106790] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2710.106799] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2710.121419] [Touch] mxt_resume 
[ 2710.130981] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2710.130989] mdss_dsi_event_handler: unhandled event=8
[ 2710.130995] mdss_dsi_event_handler-:event=8, rc=0
[ 2710.132342] tspdrv: !  tspdrv: resume.
[ 2710.363927] PM: resume of devices complete after 263.910 msecs
[ 2710.401170] pn544:IRQ GPIO = 0
[ 2710.369492] Restarting tasks ... done.
[ 2710.414683] PM: suspend exit 2017-02-06 18:19:39.391531335 UTC
[ 2710.513460] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2710.513518] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2710.513533] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2710.513571] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2710.514861] PM: suspend entry 2017-02-06 18:19:39.491734356 UTC
[ 2710.514868] PM: Syncing filesystems ... done.
[ 2710.518348] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2710.538553] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2710.541576] Suspending console(s) (use no_console_suspend to debug)
[ 2710.557251] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2710.557291] mdss_dsi_event_handler+:event=7
[ 2710.557299] mdss_dsi_event_handler: unhandled event=7
[ 2710.557305] mdss_dsi_event_handler-:event=7, rc=0
[ 2710.557320] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2710.559360] [apds9130_suspend] Enter
[ 2710.559362] [Touch] mxt_suspend 
[ 2710.559403] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2710.559408] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2710.559414] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2710.559425] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2710.561624] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2710.561637] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2710.561648] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2710.561666] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2710.561677] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2710.573574] PM: Some devices failed to suspend
[ 2710.574269] qpnp_chg_resume: DEBUG_____chg_resume
[ 2710.574630] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2710.579441] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2710.579718] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2710.580136] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2710.580661] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2710.580667] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2710.580673] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2710.580681] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2710.595313] [Touch] mxt_resume 
[ 2710.607169] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2710.607178] mdss_dsi_event_handler: unhandled event=8
[ 2710.607184] mdss_dsi_event_handler-:event=8, rc=0
[ 2710.612032] tspdrv: !  tspdrv: resume.
[ 2710.845643] PM: resume of devices complete after 272.040 msecs
[ 2710.882819] pn544:IRQ GPIO = 0
[ 2710.851025] Restarting tasks ... done.
[ 2710.898875] PM: suspend exit 2017-02-06 18:19:39.875733262 UTC
[ 2711.000497] PM: suspend entry 2017-02-06 18:19:39.977350142 UTC
[ 2711.000530] PM: Syncing filesystems ... done.
[ 2711.012604] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2711.070399] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2711.072468] Suspending console(s) (use no_console_suspend to debug)
[ 2711.081364] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2711.081385] mdss_dsi_event_handler+:event=7
[ 2711.081389] mdss_dsi_event_handler: unhandled event=7
[ 2711.081393] mdss_dsi_event_handler-:event=7, rc=0
[ 2711.081400] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2711.082654] [apds9130_suspend] Enter
[ 2711.082655] [Touch] mxt_suspend 
[ 2711.082676] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2711.082678] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2711.082682] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2711.082688] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2711.083827] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2711.083834] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2711.083840] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2711.083848] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2711.083854] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2711.097470] PM: Some devices failed to suspend
[ 2711.097860] qpnp_chg_resume: DEBUG_____chg_resume
[ 2711.098081] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2711.100613] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2711.100663] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2711.100790] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2711.101080] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2711.101082] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2711.101085] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2711.101089] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2711.113888] [Touch] mxt_resume 
[ 2711.124049] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2711.124054] mdss_dsi_event_handler: unhandled event=8
[ 2711.124057] mdss_dsi_event_handler-:event=8, rc=0
[ 2711.124737] tspdrv: !  tspdrv: resume.
[ 2711.362140] PM: resume of devices complete after 264.644 msecs
[ 2711.399456] pn544:IRQ GPIO = 0
[ 2711.367784] Restarting tasks ... done.
[ 2711.413794] PM: suspend exit 2017-02-06 18:19:40.390649876 UTC
[ 2711.514748] PM: suspend entry 2017-02-06 18:19:40.491600970 UTC
[ 2711.514782] PM: Syncing filesystems ... done.
[ 2711.523743] Freezing user space processes ... (elapsed 0.06 seconds) done.
[ 2711.586834] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2711.588903] Suspending console(s) (use no_console_suspend to debug)
[ 2711.597844] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2711.597864] mdss_dsi_event_handler+:event=7
[ 2711.597868] mdss_dsi_event_handler: unhandled event=7
[ 2711.597871] mdss_dsi_event_handler-:event=7, rc=0
[ 2711.597879] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2711.599136] [apds9130_suspend] Enter
[ 2711.599136] [Touch] mxt_suspend 
[ 2711.599158] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2711.599161] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2711.599164] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2711.599170] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2711.600323] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2711.600330] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2711.600335] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2711.600344] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2711.600349] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2711.613849] PM: Some devices failed to suspend
[ 2711.614245] qpnp_chg_resume: DEBUG_____chg_resume
[ 2711.614466] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2711.616903] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2711.616953] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2711.617079] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2711.617371] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2711.617374] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2711.617377] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2711.617381] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2711.630174] [Touch] mxt_resume 
[ 2711.641832] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2711.641837] mdss_dsi_event_handler: unhandled event=8
[ 2711.641840] mdss_dsi_event_handler-:event=8, rc=0
[ 2711.642518] tspdrv: !  tspdrv: resume.
[ 2711.871480] PM: resume of devices complete after 257.604 msecs
[ 2711.908897] pn544:IRQ GPIO = 0
[ 2711.877125] Restarting tasks ... done.
[ 2711.922422] PM: suspend exit 2017-02-06 18:19:40.899270658 UTC
[ 2712.013512] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2712.013570] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2712.013585] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2712.013623] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2712.023070] PM: suspend entry 2017-02-06 18:19:40.999941283 UTC
[ 2712.023084] PM: Syncing filesystems ... done.
[ 2712.026616] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2712.046844] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2712.048917] Suspending console(s) (use no_console_suspend to debug)
[ 2712.058896] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2712.058917] mdss_dsi_event_handler+:event=7
[ 2712.058922] mdss_dsi_event_handler: unhandled event=7
[ 2712.058925] mdss_dsi_event_handler-:event=7, rc=0
[ 2712.058934] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2712.060327] [apds9130_suspend] Enter
[ 2712.060328] [Touch] mxt_suspend 
[ 2712.060353] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2712.060356] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2712.060360] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2712.060366] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2712.061681] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2712.061688] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2712.061695] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2712.061706] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2712.061712] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2712.076396] PM: Some devices failed to suspend
[ 2712.076832] qpnp_chg_resume: DEBUG_____chg_resume
[ 2712.077071] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2712.080295] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2712.080355] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2712.080497] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2712.080831] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2712.080834] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2712.080838] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2712.080843] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2712.093773] [Touch] mxt_resume 
[ 2712.104085] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2712.104090] mdss_dsi_event_handler: unhandled event=8
[ 2712.104094] mdss_dsi_event_handler-:event=8, rc=0
[ 2712.104869] tspdrv: !  tspdrv: resume.
[ 2712.338213] PM: resume of devices complete after 261.791 msecs
[ 2712.375421] pn544:IRQ GPIO = 0
[ 2712.343590] Restarting tasks ... done.
[ 2712.389475] PM: suspend exit 2017-02-06 18:19:41.366325657 UTC
[ 2712.490815] PM: suspend entry 2017-02-06 18:19:41.467686023 UTC
[ 2712.490829] PM: Syncing filesystems ... done.
[ 2712.494281] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2712.513591] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2712.515677] Suspending console(s) (use no_console_suspend to debug)
[ 2712.524653] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2712.524674] mdss_dsi_event_handler+:event=7
[ 2712.524678] mdss_dsi_event_handler: unhandled event=7
[ 2712.524681] mdss_dsi_event_handler-:event=7, rc=0
[ 2712.524688] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2712.526038] [apds9130_suspend] Enter
[ 2712.526039] [Touch] mxt_suspend 
[ 2712.526061] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2712.526063] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2712.526066] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2712.526073] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2712.527257] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2712.527264] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2712.527269] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2712.527279] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2712.527285] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2712.541246] PM: Some devices failed to suspend
[ 2712.541689] qpnp_chg_resume: DEBUG_____chg_resume
[ 2712.541780] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2712.545075] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2712.545135] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2712.545406] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2712.545621] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2712.545624] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2712.545627] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2712.545632] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2712.558709] [Touch] mxt_resume 
[ 2712.569495] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2712.569500] mdss_dsi_event_handler: unhandled event=8
[ 2712.569504] mdss_dsi_event_handler-:event=8, rc=0
[ 2712.570280] tspdrv: !  tspdrv: resume.
[ 2712.802821] PM: resume of devices complete after 261.548 msecs
[ 2712.840146] pn544:IRQ GPIO = 0
[ 2712.808447] Restarting tasks ... done.
[ 2712.856116] PM: suspend exit 2017-02-06 18:19:41.832973209 UTC
[ 2712.957801] PM: suspend entry 2017-02-06 18:19:41.934653418 UTC
[ 2712.957835] PM: Syncing filesystems ... done.
[ 2712.968593] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2713.027693] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2713.029764] Suspending console(s) (use no_console_suspend to debug)
[ 2713.038708] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2713.038727] mdss_dsi_event_handler+:event=7
[ 2713.038731] mdss_dsi_event_handler: unhandled event=7
[ 2713.038734] mdss_dsi_event_handler-:event=7, rc=0
[ 2713.038742] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2713.040003] [apds9130_suspend] Enter
[ 2713.040004] [Touch] mxt_suspend 
[ 2713.040026] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2713.040029] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2713.040032] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2713.040038] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2713.041192] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2713.041199] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2713.041204] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2713.041214] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2713.041219] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2713.055049] PM: Some devices failed to suspend
[ 2713.055441] qpnp_chg_resume: DEBUG_____chg_resume
[ 2713.055659] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2713.058102] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2713.058152] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2713.058275] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2713.058565] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2713.058568] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2713.058571] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2713.058575] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2713.071370] [Touch] mxt_resume 
[ 2713.083026] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2713.083031] mdss_dsi_event_handler: unhandled event=8
[ 2713.083034] mdss_dsi_event_handler-:event=8, rc=0
[ 2713.083714] tspdrv: !  tspdrv: resume.
[ 2713.311390] PM: resume of devices complete after 256.315 msecs
[ 2713.348837] pn544:IRQ GPIO = 0
[ 2713.316929] Restarting tasks ... done.
[ 2713.362921] PM: suspend exit 2017-02-06 18:19:42.339770865 UTC
[ 2713.463847] PM: suspend entry 2017-02-06 18:19:42.440695136 UTC
[ 2713.463887] PM: Syncing filesystems ... done.
[ 2713.512951] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2713.513008] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2713.513024] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2713.513064] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2713.476238] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2713.520309] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2713.522389] Suspending console(s) (use no_console_suspend to debug)
[ 2713.531776] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2713.531796] mdss_dsi_event_handler+:event=7
[ 2713.531800] mdss_dsi_event_handler: unhandled event=7
[ 2713.531803] mdss_dsi_event_handler-:event=7, rc=0
[ 2713.531810] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2713.533112] [apds9130_suspend] Enter
[ 2713.533113] [Touch] mxt_suspend 
[ 2713.533136] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2713.533138] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2713.533141] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2713.533147] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2713.534338] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2713.534344] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2713.534350] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2713.534359] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2713.534365] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2713.547710] PM: Some devices failed to suspend
[ 2713.548118] qpnp_chg_resume: DEBUG_____chg_resume
[ 2713.548453] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2713.550759] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2713.550809] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2713.550936] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2713.551228] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2713.551231] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2713.551234] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2713.551238] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2713.556486] [Touch] mxt_resume 
[ 2713.568566] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2713.568571] mdss_dsi_event_handler: unhandled event=8
[ 2713.568574] mdss_dsi_event_handler-:event=8, rc=0
[ 2713.569253] tspdrv: !  tspdrv: resume.
[ 2713.811264] PM: resume of devices complete after 263.529 msecs
[ 2713.848724] pn544:IRQ GPIO = 0
[ 2713.816916] Restarting tasks ... done.
[ 2713.862672] PM: suspend exit 2017-02-06 18:19:42.839519303 UTC
[ 2713.964119] PM: suspend entry 2017-02-06 18:19:42.940989512 UTC
[ 2713.964133] PM: Syncing filesystems ... done.
[ 2713.977930] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2714.021927] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2714.024009] Suspending console(s) (use no_console_suspend to debug)
[ 2714.028798] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2714.028820] mdss_dsi_event_handler+:event=7
[ 2714.028824] mdss_dsi_event_handler: unhandled event=7
[ 2714.028827] mdss_dsi_event_handler-:event=7, rc=0
[ 2714.028834] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2714.030348] [apds9130_suspend] Enter
[ 2714.030349] [Touch] mxt_suspend 
[ 2714.030370] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2714.030373] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2714.030376] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2714.030381] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2714.033763] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2714.033770] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2714.033775] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2714.033785] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2714.033791] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2714.050264] PM: Some devices failed to suspend
[ 2714.050655] qpnp_chg_resume: DEBUG_____chg_resume
[ 2714.050871] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2714.053311] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2714.053361] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2714.053487] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2714.053777] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2714.053780] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2714.053783] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2714.053787] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2714.065877] [Touch] mxt_resume 
[ 2714.075245] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2714.075249] mdss_dsi_event_handler: unhandled event=8
[ 2714.075252] mdss_dsi_event_handler-:event=8, rc=0
[ 2714.078804] tspdrv: !  tspdrv: resume.
[ 2714.315578] PM: resume of devices complete after 265.286 msecs
[ 2714.352860] pn544:IRQ GPIO = 0
[ 2714.320970] Restarting tasks ... done.
[ 2714.368017] PM: suspend exit 2017-02-06 18:19:43.344889094 UTC
[ 2714.469284] PM: suspend entry 2017-02-06 18:19:43.446154670 UTC
[ 2714.469298] PM: Syncing filesystems ... done.
[ 2714.472844] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2714.503793] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2714.506843] Suspending console(s) (use no_console_suspend to debug)
[ 2714.522522] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2714.522562] mdss_dsi_event_handler+:event=7
[ 2714.522569] mdss_dsi_event_handler: unhandled event=7
[ 2714.522575] mdss_dsi_event_handler-:event=7, rc=0
[ 2714.522590] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2714.524521] [apds9130_suspend] Enter
[ 2714.524522] [Touch] mxt_suspend 
[ 2714.524564] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2714.524569] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2714.524575] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2714.524585] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2714.527248] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2714.527262] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2714.527273] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2714.527290] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2714.527300] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2714.539189] PM: Some devices failed to suspend
[ 2714.539894] qpnp_chg_resume: DEBUG_____chg_resume
[ 2714.540249] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2714.544457] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2714.544729] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2714.545186] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2714.545717] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2714.545722] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2714.545728] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2714.545908] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2714.560504] [Touch] mxt_resume 
[ 2714.570996] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2714.571004] mdss_dsi_event_handler: unhandled event=8
[ 2714.571010] mdss_dsi_event_handler-:event=8, rc=0
[ 2714.572357] tspdrv: !  tspdrv: resume.
[ 2714.803950] PM: resume of devices complete after 264.734 msecs
[ 2714.841228] pn544:IRQ GPIO = 0
[ 2714.809528] Restarting tasks ... done.
[ 2714.854773] PM: suspend exit 2017-02-06 18:19:43.831620916 UTC
[ 2714.956035] PM: suspend entry 2017-02-06 18:19:43.932906702 UTC
[ 2714.956049] PM: Syncing filesystems ... done.
[ 2714.959498] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2714.979006] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2714.982075] Suspending console(s) (use no_console_suspend to debug)
[ 2714.997862] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2714.997904] mdss_dsi_event_handler+:event=7
[ 2714.997911] mdss_dsi_event_handler: unhandled event=7
[ 2714.997918] mdss_dsi_event_handler-:event=7, rc=0
[ 2714.997933] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2715.000034] [apds9130_suspend] Enter
[ 2715.000036] [Touch] mxt_suspend 
[ 2715.000079] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2715.000084] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2715.000090] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2715.000100] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2715.002335] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2715.002348] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2715.002359] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2715.002378] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2715.002389] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2715.012050] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2715.012130] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2715.012150] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2715.012212] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2715.014487] PM: Some devices failed to suspend
[ 2715.015547] qpnp_chg_resume: DEBUG_____chg_resume
[ 2715.015680] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2715.019743] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2715.020018] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2715.020443] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2715.020978] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2715.020984] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2715.020990] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2715.020999] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2715.035976] [Touch] mxt_resume 
[ 2715.046435] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2715.046443] mdss_dsi_event_handler: unhandled event=8
[ 2715.046449] mdss_dsi_event_handler-:event=8, rc=0
[ 2715.051303] tspdrv: !  tspdrv: resume.
[ 2715.283801] PM: resume of devices complete after 269.287 msecs
[ 2715.321274] pn544:IRQ GPIO = 0
[ 2715.289334] Restarting tasks ... done.
[ 2715.336562] PM: suspend exit 2017-02-06 18:19:44.313412583 UTC
[ 2715.437860] PM: suspend entry 2017-02-06 18:19:44.414729989 UTC
[ 2715.437873] PM: Syncing filesystems ... done.
[ 2715.441328] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2715.471360] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2715.474399] Suspending console(s) (use no_console_suspend to debug)
[ 2715.490125] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2715.490166] mdss_dsi_event_handler+:event=7
[ 2715.490173] mdss_dsi_event_handler: unhandled event=7
[ 2715.490179] mdss_dsi_event_handler-:event=7, rc=0
[ 2715.490194] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2715.492225] [apds9130_suspend] Enter
[ 2715.492226] [Touch] mxt_suspend 
[ 2715.492268] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2715.492273] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2715.492279] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2715.492290] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2715.494486] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2715.494499] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2715.494510] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2715.494528] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2715.494539] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2715.506608] PM: Some devices failed to suspend
[ 2715.507292] qpnp_chg_resume: DEBUG_____chg_resume
[ 2715.507647] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2715.512311] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2715.512586] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2715.513008] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2715.513530] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2715.513536] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2715.513542] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2715.513550] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2715.525656] [Touch] mxt_resume 
[ 2715.536782] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2715.536790] mdss_dsi_event_handler: unhandled event=8
[ 2715.536796] mdss_dsi_event_handler-:event=8, rc=0
[ 2715.541631] tspdrv: !  tspdrv: resume.
[ 2715.775573] PM: resume of devices complete after 268.936 msecs
[ 2715.812698] pn544:IRQ GPIO = 0
[ 2715.780951] Restarting tasks ... done.
[ 2715.828570] PM: suspend exit 2017-02-06 18:19:44.805426333 UTC
[ 2715.929247] PM: suspend entry 2017-02-06 18:19:44.906094303 UTC
[ 2715.929288] PM: Syncing filesystems ... done.
[ 2715.941589] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2716.000208] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2716.002287] Suspending console(s) (use no_console_suspend to debug)
[ 2716.011482] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2716.011503] mdss_dsi_event_handler+:event=7
[ 2716.011507] mdss_dsi_event_handler: unhandled event=7
[ 2716.011510] mdss_dsi_event_handler-:event=7, rc=0
[ 2716.011517] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2716.012809] [apds9130_suspend] Enter
[ 2716.012810] [Touch] mxt_suspend 
[ 2716.012833] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2716.012835] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2716.012838] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2716.012844] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2716.014032] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2716.014039] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2716.014045] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2716.014054] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2716.014060] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2716.027654] PM: Some devices failed to suspend
[ 2716.028052] qpnp_chg_resume: DEBUG_____chg_resume
[ 2716.028390] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2716.030702] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2716.030752] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2716.030879] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2716.031171] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2716.031174] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2716.031177] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2716.031181] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2716.044073] [Touch] mxt_resume 
[ 2716.054157] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2716.054161] mdss_dsi_event_handler: unhandled event=8
[ 2716.054164] mdss_dsi_event_handler-:event=8, rc=0
[ 2716.054841] tspdrv: !  tspdrv: resume.
[ 2716.288968] PM: resume of devices complete after 261.288 msecs
[ 2716.326345] pn544:IRQ GPIO = 0
[ 2716.294355] Restarting tasks ... done.
[ 2716.340554] PM: suspend exit 2017-02-06 18:19:45.317402948 UTC
[ 2716.441904] PM: suspend entry 2017-02-06 18:19:45.418774200 UTC
[ 2716.441917] PM: Syncing filesystems ... done.
[ 2716.445413] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2716.482542] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2716.486535] Suspending console(s) (use no_console_suspend to debug)
[ 2716.508077] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2716.508113] mdss_dsi_event_handler+:event=7
[ 2716.508121] mdss_dsi_event_handler: unhandled event=7
[ 2716.508127] mdss_dsi_event_handler-:event=7, rc=0
[ 2716.508142] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2716.510175] [apds9130_suspend] Enter
[ 2716.510176] [Touch] mxt_suspend 
[ 2716.510218] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2716.510223] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2716.510229] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2716.510239] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2716.511028] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2716.511113] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2716.511132] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2716.511196] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2716.512789] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2716.512802] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2716.512814] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2716.512832] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2716.512842] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2716.521843] PM: Some devices failed to suspend
[ 2716.522558] qpnp_chg_resume: DEBUG_____chg_resume
[ 2716.522918] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2716.527686] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2716.527972] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2716.528395] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2716.528929] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2716.528935] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2716.528941] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2716.529122] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2716.543754] [Touch] mxt_resume 
[ 2716.554875] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2716.554884] mdss_dsi_event_handler: unhandled event=8
[ 2716.554889] mdss_dsi_event_handler-:event=8, rc=0
[ 2716.558110] tspdrv: !  tspdrv: resume.
[ 2716.795906] PM: resume of devices complete after 274.034 msecs
[ 2716.833073] pn544:IRQ GPIO = 0
[ 2716.801337] Restarting tasks ... done.
[ 2716.849133] PM: suspend exit 2017-02-06 18:19:45.825986645 UTC
[ 2716.950473] PM: suspend entry 2017-02-06 18:19:45.927343575 UTC
[ 2716.950487] PM: Syncing filesystems ... done.
[ 2716.953935] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2716.985457] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2716.988497] Suspending console(s) (use no_console_suspend to debug)
[ 2717.004120] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2717.004161] mdss_dsi_event_handler+:event=7
[ 2717.004168] mdss_dsi_event_handler: unhandled event=7
[ 2717.004175] mdss_dsi_event_handler-:event=7, rc=0
[ 2717.004190] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2717.006310] [apds9130_suspend] Enter
[ 2717.006311] [Touch] mxt_suspend 
[ 2717.006354] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2717.006359] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2717.006365] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2717.006375] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2717.008573] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2717.008586] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2717.008597] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2717.008615] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2717.008626] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2717.020556] PM: Some devices failed to suspend
[ 2717.021250] qpnp_chg_resume: DEBUG_____chg_resume
[ 2717.021609] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2717.026263] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2717.026537] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2717.026961] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2717.027488] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2717.027494] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2717.027500] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2717.027508] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2717.036670] [Touch] mxt_resume 
[ 2717.049881] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2717.049890] mdss_dsi_event_handler: unhandled event=8
[ 2717.049897] mdss_dsi_event_handler-:event=8, rc=0
[ 2717.051244] tspdrv: !  tspdrv: resume.
[ 2717.295348] PM: resume of devices complete after 274.763 msecs
[ 2717.332534] pn544:IRQ GPIO = 0
[ 2717.300733] Restarting tasks ... done.
[ 2717.348734] PM: suspend exit 2017-02-06 18:19:46.325587790 UTC
[ 2717.449855] PM: suspend entry 2017-02-06 18:19:46.426726073 UTC
[ 2717.449869] PM: Syncing filesystems ... done.
[ 2717.453323] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2717.484724] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2717.487830] Suspending console(s) (use no_console_suspend to debug)
[ 2717.503432] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2717.503472] mdss_dsi_event_handler+:event=7
[ 2717.503479] mdss_dsi_event_handler: unhandled event=7
[ 2717.503486] mdss_dsi_event_handler-:event=7, rc=0
[ 2717.503501] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2717.505905] [apds9130_suspend] Enter
[ 2717.505906] [Touch] mxt_suspend 
[ 2717.505948] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2717.505954] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2717.505960] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2717.505970] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2717.508144] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2717.508157] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2717.508167] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2717.508186] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2717.508196] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2717.519879] PM: Some devices failed to suspend
[ 2717.520581] qpnp_chg_resume: DEBUG_____chg_resume
[ 2717.520940] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2717.525462] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2717.525563] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2717.525981] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2717.526682] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2717.526687] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2717.526693] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2717.526702] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2717.541355] [Touch] mxt_resume 
[ 2717.550988] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2717.550996] mdss_dsi_event_handler: unhandled event=8
[ 2717.551002] mdss_dsi_event_handler-:event=8, rc=0
[ 2717.552349] tspdrv: !  tspdrv: resume.
[ 2717.784034] PM: resume of devices complete after 264.128 msecs
[ 2717.821312] pn544:IRQ GPIO = 0
[ 2717.789616] Restarting tasks ... done.
[ 2717.834826] PM: suspend exit 2017-02-06 18:19:46.811674040 UTC
[ 2717.936082] PM: suspend entry 2017-02-06 18:19:46.912952688 UTC
[ 2717.936096] PM: Syncing filesystems ... done.
[ 2717.939555] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2717.959122] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2717.962195] Suspending console(s) (use no_console_suspend to debug)
[ 2717.977900] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2717.977941] mdss_dsi_event_handler+:event=7
[ 2717.977948] mdss_dsi_event_handler: unhandled event=7
[ 2717.977954] mdss_dsi_event_handler-:event=7, rc=0
[ 2717.977970] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2717.980066] [apds9130_suspend] Enter
[ 2717.980067] [Touch] mxt_suspend 
[ 2717.980110] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2717.980115] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2717.980121] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2717.980131] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2717.982374] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2717.982387] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2717.982398] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2717.982416] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2717.982427] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2717.994350] PM: Some devices failed to suspend
[ 2717.995416] qpnp_chg_resume: DEBUG_____chg_resume
[ 2717.995552] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.000062] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.000344] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.000770] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.001303] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2718.001308] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2718.001314] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2718.001322] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2718.007059] [Touch] mxt_resume 
[ 2718.012684] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2718.012775] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2718.012794] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2718.012858] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2718.021643] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2718.021652] mdss_dsi_event_handler: unhandled event=8
[ 2718.021658] mdss_dsi_event_handler-:event=8, rc=0
[ 2718.023006] tspdrv: !  tspdrv: resume.
[ 2718.263848] PM: resume of devices complete after 269.470 msecs
[ 2718.301293] pn544:IRQ GPIO = 0
[ 2718.269395] Restarting tasks ... done.
[ 2718.317571] PM: suspend exit 2017-02-06 18:19:47.294442530 UTC
[ 2718.418959] PM: suspend entry 2017-02-06 18:19:47.395830035 UTC
[ 2718.418973] PM: Syncing filesystems ... done.
[ 2718.422417] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2718.451756] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2718.454799] Suspending console(s) (use no_console_suspend to debug)
[ 2718.470498] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2718.470538] mdss_dsi_event_handler+:event=7
[ 2718.470546] mdss_dsi_event_handler: unhandled event=7
[ 2718.470552] mdss_dsi_event_handler-:event=7, rc=0
[ 2718.470567] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2718.472606] [apds9130_suspend] Enter
[ 2718.472607] [Touch] mxt_suspend 
[ 2718.472649] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2718.472654] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2718.472660] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2718.472671] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2718.474868] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2718.474880] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2718.474891] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2718.474909] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2718.474920] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2718.486905] PM: Some devices failed to suspend
[ 2718.487597] qpnp_chg_resume: DEBUG_____chg_resume
[ 2718.487955] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.492610] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.492886] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.493305] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.493831] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2718.493837] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2718.493843] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2718.493851] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2718.508426] [Touch] mxt_resume 
[ 2718.521316] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2718.521324] mdss_dsi_event_handler: unhandled event=8
[ 2718.521330] mdss_dsi_event_handler-:event=8, rc=0
[ 2718.525803] tspdrv: !  tspdrv: resume.
[ 2718.753844] PM: resume of devices complete after 266.911 msecs
[ 2718.791108] pn544:IRQ GPIO = 0
[ 2718.759410] Restarting tasks ... done.
[ 2718.804632] PM: suspend exit 2017-02-06 18:19:47.781479717 UTC
[ 2718.905729] PM: suspend entry 2017-02-06 18:19:47.882600136 UTC
[ 2718.905743] PM: Syncing filesystems ... done.
[ 2718.909191] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2718.957998] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2718.962646] Suspending console(s) (use no_console_suspend to debug)
[ 2718.974912] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2718.974932] mdss_dsi_event_handler+:event=7
[ 2718.975017] mdss_dsi_event_handler: unhandled event=7
[ 2718.975021] mdss_dsi_event_handler-:event=7, rc=0
[ 2718.975029] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2718.976292] [apds9130_suspend] Enter
[ 2718.976293] [Touch] mxt_suspend 
[ 2718.976315] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2718.976318] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2718.976321] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2718.976327] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2718.977488] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2718.977495] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2718.977500] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2718.977510] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2718.977515] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2718.990978] PM: Some devices failed to suspend
[ 2718.991368] qpnp_chg_resume: DEBUG_____chg_resume
[ 2718.991589] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.994028] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.994077] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.994201] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2718.994488] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2718.994490] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2718.994493] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2718.994498] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2719.005203] [Touch] mxt_resume 
[ 2719.014354] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2719.014359] mdss_dsi_event_handler: unhandled event=8
[ 2719.014362] mdss_dsi_event_handler-:event=8, rc=0
[ 2719.015431] tspdrv: !  tspdrv: resume.
[ 2719.254546] PM: resume of devices complete after 263.541 msecs
[ 2719.292107] pn544:IRQ GPIO = 0
[ 2719.260043] Restarting tasks ... done.
[ 2719.308156] PM: suspend exit 2017-02-06 18:19:48.285009820 UTC
[ 2719.409477] PM: suspend entry 2017-02-06 18:19:48.386347582 UTC
[ 2719.409490] PM: Syncing filesystems ... done.
[ 2719.412942] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2719.444250] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2719.447361] Suspending console(s) (use no_console_suspend to debug)
[ 2719.463014] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2719.463053] mdss_dsi_event_handler+:event=7
[ 2719.463061] mdss_dsi_event_handler: unhandled event=7
[ 2719.463067] mdss_dsi_event_handler-:event=7, rc=0
[ 2719.463082] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2719.465125] [apds9130_suspend] Enter
[ 2719.465127] [Touch] mxt_suspend 
[ 2719.465169] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2719.465174] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2719.465180] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2719.465190] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2719.467391] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2719.467404] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2719.467415] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2719.467433] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2719.467443] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2719.479406] PM: Some devices failed to suspend
[ 2719.480099] qpnp_chg_resume: DEBUG_____chg_resume
[ 2719.480453] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2719.485128] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2719.485410] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2719.485828] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2719.486356] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2719.486532] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2719.486539] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2719.486547] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2719.501199] [Touch] mxt_resume 
[ 2719.511009] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2719.511094] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2719.511113] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2719.511177] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2719.511388] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2719.511396] mdss_dsi_event_handler: unhandled event=8
[ 2719.511402] mdss_dsi_event_handler-:event=8, rc=0
[ 2719.512745] tspdrv: !  tspdrv: resume.
[ 2719.746628] PM: resume of devices complete after 267.194 msecs
[ 2719.784292] pn544:IRQ GPIO = 0
[ 2719.752054] Restarting tasks ... done.
[ 2719.799470] PM: suspend exit 2017-02-06 18:19:48.776325290 UTC
[ 2719.900709] PM: suspend entry 2017-02-06 18:19:48.877562164 UTC
[ 2719.900743] PM: Syncing filesystems ... done.
[ 2719.912087] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2719.969714] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2719.971777] Suspending console(s) (use no_console_suspend to debug)
[ 2719.980762] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2719.980782] mdss_dsi_event_handler+:event=7
[ 2719.980786] mdss_dsi_event_handler: unhandled event=7
[ 2719.980789] mdss_dsi_event_handler-:event=7, rc=0
[ 2719.980797] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2719.982058] [apds9130_suspend] Enter
[ 2719.982059] [Touch] mxt_suspend 
[ 2719.982081] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2719.982083] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2719.982086] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2719.982092] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2719.983251] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2719.983257] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2719.983263] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2719.983272] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2719.983278] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2719.996856] PM: Some devices failed to suspend
[ 2719.997242] qpnp_chg_resume: DEBUG_____chg_resume
[ 2719.997459] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2719.999903] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2719.999953] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.000077] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.000366] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2720.000369] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2720.000372] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2720.000376] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2720.007144] [Touch] mxt_resume 
[ 2720.015209] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2720.015213] mdss_dsi_event_handler: unhandled event=8
[ 2720.015216] mdss_dsi_event_handler-:event=8, rc=0
[ 2720.015882] tspdrv: !  tspdrv: resume.
[ 2720.250877] PM: resume of devices complete after 253.995 msecs
[ 2720.288121] pn544:IRQ GPIO = 0
[ 2720.256408] Restarting tasks ... done.
[ 2720.302281] PM: suspend exit 2017-02-06 18:19:49.279130550 UTC
[ 2720.403741] PM: suspend entry 2017-02-06 18:19:49.380611955 UTC
[ 2720.403755] PM: Syncing filesystems ... done.
[ 2720.417504] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2720.461038] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2720.463125] Suspending console(s) (use no_console_suspend to debug)
[ 2720.472135] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2720.472156] mdss_dsi_event_handler+:event=7
[ 2720.472160] mdss_dsi_event_handler: unhandled event=7
[ 2720.472163] mdss_dsi_event_handler-:event=7, rc=0
[ 2720.472171] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2720.473460] [apds9130_suspend] Enter
[ 2720.473461] [Touch] mxt_suspend 
[ 2720.473484] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2720.473486] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2720.473489] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2720.473495] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2720.474685] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2720.474692] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2720.474697] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2720.474707] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2720.474712] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2720.488056] PM: Some devices failed to suspend
[ 2720.488452] qpnp_chg_resume: DEBUG_____chg_resume
[ 2720.488671] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.491106] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.491156] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.491280] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.491571] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2720.491574] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2720.491576] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2720.491581] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2720.496724] [Touch] mxt_resume 
[ 2720.505486] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2720.505491] mdss_dsi_event_handler: unhandled event=8
[ 2720.505493] mdss_dsi_event_handler-:event=8, rc=0
[ 2720.506159] tspdrv: !  tspdrv: resume.
[ 2720.751238] PM: resume of devices complete after 263.157 msecs
[ 2720.788478] pn544:IRQ GPIO = 0
[ 2720.756767] Restarting tasks ... done.
[ 2720.802742] PM: suspend exit 2017-02-06 18:19:49.779590289 UTC
[ 2720.903367] PM: suspend entry 2017-02-06 18:19:49.880238208 UTC
[ 2720.903381] PM: Syncing filesystems ... done.
[ 2720.906876] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2720.943800] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2720.947864] Suspending console(s) (use no_console_suspend to debug)
[ 2720.967520] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2720.967539] mdss_dsi_event_handler+:event=7
[ 2720.967543] mdss_dsi_event_handler: unhandled event=7
[ 2720.967546] mdss_dsi_event_handler-:event=7, rc=0
[ 2720.967553] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2720.968821] [apds9130_suspend] Enter
[ 2720.968822] [Touch] mxt_suspend 
[ 2720.968844] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2720.968846] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2720.968849] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2720.968855] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2720.970013] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2720.970019] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2720.970024] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2720.970034] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2720.970039] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2720.981363] PM: Some devices failed to suspend
[ 2720.981756] qpnp_chg_resume: DEBUG_____chg_resume
[ 2720.981975] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.984411] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.984461] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.984584] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2720.984873] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2720.984875] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2720.984878] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2720.984882] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2720.997653] [Touch] mxt_resume 
[ 2721.006165] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2721.006170] mdss_dsi_event_handler: unhandled event=8
[ 2721.006173] mdss_dsi_event_handler-:event=8, rc=0
[ 2721.009265] tspdrv: !  tspdrv: resume.
[ 2721.012969] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2721.013014] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2721.013024] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2721.013056] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2721.243649] PM: resume of devices complete after 262.260 msecs
[ 2721.281393] pn544:IRQ GPIO = 0
[ 2721.249303] Restarting tasks ... done.
[ 2721.297405] PM: suspend exit 2017-02-06 18:19:50.274258988 UTC
[ 2721.399086] PM: suspend entry 2017-02-06 18:19:50.375956748 UTC
[ 2721.399099] PM: Syncing filesystems ... done.
[ 2721.412793] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2721.456900] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2721.458980] Suspending console(s) (use no_console_suspend to debug)
[ 2721.468073] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2721.468094] mdss_dsi_event_handler+:event=7
[ 2721.468098] mdss_dsi_event_handler: unhandled event=7
[ 2721.468101] mdss_dsi_event_handler-:event=7, rc=0
[ 2721.468108] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2721.469400] [apds9130_suspend] Enter
[ 2721.469401] [Touch] mxt_suspend 
[ 2721.469424] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2721.469426] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2721.469430] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2721.469435] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2721.470627] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2721.470633] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2721.470639] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2721.470648] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2721.470654] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2721.484287] PM: Some devices failed to suspend
[ 2721.484681] qpnp_chg_resume: DEBUG_____chg_resume
[ 2721.484901] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2721.487552] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2721.487602] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2721.487726] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2721.488020] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2721.488022] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2721.488025] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2721.488030] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2721.500847] [Touch] mxt_resume 
[ 2721.512506] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2721.512511] mdss_dsi_event_handler: unhandled event=8
[ 2721.512514] mdss_dsi_event_handler-:event=8, rc=0
[ 2721.513194] tspdrv: !  tspdrv: resume.
[ 2721.741484] PM: resume of devices complete after 257.171 msecs
[ 2721.778930] pn544:IRQ GPIO = 0
[ 2721.747127] Restarting tasks ... done.
[ 2721.792420] PM: suspend exit 2017-02-06 18:19:50.769269091 UTC
[ 2721.893595] PM: suspend entry 2017-02-06 18:19:50.870466072 UTC
[ 2721.893608] PM: Syncing filesystems ... done.
[ 2721.897101] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2721.917393] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2721.920413] Suspending console(s) (use no_console_suspend to debug)
[ 2721.936022] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2721.936062] mdss_dsi_event_handler+:event=7
[ 2721.936069] mdss_dsi_event_handler: unhandled event=7
[ 2721.936075] mdss_dsi_event_handler-:event=7, rc=0
[ 2721.936090] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2721.938129] [apds9130_suspend] Enter
[ 2721.938130] [Touch] mxt_suspend 
[ 2721.938173] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2721.938178] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2721.938184] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2721.938194] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2721.940399] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2721.940413] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2721.940424] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2721.940442] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2721.940453] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2721.952201] PM: Some devices failed to suspend
[ 2721.952898] qpnp_chg_resume: DEBUG_____chg_resume
[ 2721.953252] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2721.957887] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2721.958161] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2721.958581] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2721.959109] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2721.959115] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2721.959121] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2721.959129] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2721.973729] [Touch] mxt_resume 
[ 2721.984842] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2721.984851] mdss_dsi_event_handler: unhandled event=8
[ 2721.984857] mdss_dsi_event_handler-:event=8, rc=0
[ 2721.987976] tspdrv: !  tspdrv: resume.
[ 2722.224476] PM: resume of devices complete after 272.247 msecs
[ 2722.262281] pn544:IRQ GPIO = 0
[ 2722.230067] Restarting tasks ... done.
[ 2722.277985] PM: suspend exit 2017-02-06 18:19:51.254858206 UTC
[ 2722.379243] PM: suspend entry 2017-02-06 18:19:51.356113990 UTC
[ 2722.379257] PM: Syncing filesystems ... done.
[ 2722.382704] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2722.411892] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2722.414932] Suspending console(s) (use no_console_suspend to debug)
[ 2722.430636] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2722.430674] mdss_dsi_event_handler+:event=7
[ 2722.430682] mdss_dsi_event_handler: unhandled event=7
[ 2722.430688] mdss_dsi_event_handler-:event=7, rc=0
[ 2722.430703] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2722.432743] [apds9130_suspend] Enter
[ 2722.432744] [Touch] mxt_suspend 
[ 2722.432787] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2722.432792] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2722.432798] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2722.432808] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2722.435049] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2722.435062] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2722.435073] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2722.435091] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2722.435101] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2722.447043] PM: Some devices failed to suspend
[ 2722.447739] qpnp_chg_resume: DEBUG_____chg_resume
[ 2722.448097] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2722.452749] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2722.453025] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2722.453445] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2722.453971] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2722.453977] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2722.453983] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2722.453991] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2722.468567] [Touch] mxt_resume 
[ 2722.481298] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2722.481306] mdss_dsi_event_handler: unhandled event=8
[ 2722.481312] mdss_dsi_event_handler-:event=8, rc=0
[ 2722.485671] tspdrv: !  tspdrv: resume.
[ 2722.513295] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2722.513380] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2722.513400] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2722.513462] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2722.714213] PM: resume of devices complete after 267.145 msecs
[ 2722.751544] pn544:IRQ GPIO = 0
[ 2722.719841] Restarting tasks ... done.
[ 2722.767821] PM: suspend exit 2017-02-06 18:19:51.744693310 UTC
[ 2722.869142] PM: suspend entry 2017-02-06 18:19:51.846013158 UTC
[ 2722.869156] PM: Syncing filesystems ... done.
[ 2722.872605] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2722.901877] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2722.904931] Suspending console(s) (use no_console_suspend to debug)
[ 2722.920640] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2722.920680] mdss_dsi_event_handler+:event=7
[ 2722.920687] mdss_dsi_event_handler: unhandled event=7
[ 2722.920694] mdss_dsi_event_handler-:event=7, rc=0
[ 2722.920709] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2722.922743] [apds9130_suspend] Enter
[ 2722.922744] [Touch] mxt_suspend 
[ 2722.922786] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2722.922791] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2722.922797] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2722.922808] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2722.925083] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2722.925096] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2722.925108] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2722.925126] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2722.925137] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2722.937061] PM: Some devices failed to suspend
[ 2722.937759] qpnp_chg_resume: DEBUG_____chg_resume
[ 2722.938118] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2722.942304] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2722.942578] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2722.943001] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2722.943526] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2722.943532] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2722.943538] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2722.943546] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2722.958122] [Touch] mxt_resume 
[ 2722.970931] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2722.970939] mdss_dsi_event_handler: unhandled event=8
[ 2722.970945] mdss_dsi_event_handler-:event=8, rc=0
[ 2722.975478] tspdrv: !  tspdrv: resume.
[ 2723.206079] PM: resume of devices complete after 268.990 msecs
[ 2723.243144] pn544:IRQ GPIO = 0
[ 2723.211464] Restarting tasks ... done.
[ 2723.262059] PM: suspend exit 2017-02-06 18:19:52.238915289 UTC
[ 2723.363352] PM: suspend entry 2017-02-06 18:19:52.340204091 UTC
[ 2723.363386] PM: Syncing filesystems ... done.
[ 2723.376092] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2723.432855] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2723.434925] Suspending console(s) (use no_console_suspend to debug)
[ 2723.439616] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2723.439636] mdss_dsi_event_handler+:event=7
[ 2723.439641] mdss_dsi_event_handler: unhandled event=7
[ 2723.439643] mdss_dsi_event_handler-:event=7, rc=0
[ 2723.439651] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2723.441383] [apds9130_suspend] Enter
[ 2723.441384] [Touch] mxt_suspend 
[ 2723.441524] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2723.441527] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2723.441530] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2723.441535] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2723.444048] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2723.444055] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2723.444061] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2723.444071] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2723.444076] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2723.460629] PM: Some devices failed to suspend
[ 2723.461016] qpnp_chg_resume: DEBUG_____chg_resume
[ 2723.461232] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2723.463680] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2723.463731] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2723.463855] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2723.464145] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2723.464148] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2723.464151] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2723.464155] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2723.476950] [Touch] mxt_resume 
[ 2723.485485] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2723.485489] mdss_dsi_event_handler: unhandled event=8
[ 2723.485492] mdss_dsi_event_handler-:event=8, rc=0
[ 2723.488900] tspdrv: !  tspdrv: resume.
[ 2723.725971] PM: resume of devices complete after 265.315 msecs
[ 2723.763050] pn544:IRQ GPIO = 0
[ 2723.731362] Restarting tasks ... done.
[ 2723.779048] PM: suspend exit 2017-02-06 18:19:52.755903934 UTC
[ 2723.880286] PM: suspend entry 2017-02-06 18:19:52.857132842 UTC
[ 2723.880326] PM: Syncing filesystems ... done.
[ 2723.891878] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2723.950892] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2723.952969] Suspending console(s) (use no_console_suspend to debug)
[ 2723.961982] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2723.962002] mdss_dsi_event_handler+:event=7
[ 2723.962006] mdss_dsi_event_handler: unhandled event=7
[ 2723.962009] mdss_dsi_event_handler-:event=7, rc=0
[ 2723.962016] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2723.963301] [apds9130_suspend] Enter
[ 2723.963302] [Touch] mxt_suspend 
[ 2723.963324] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2723.963326] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2723.963329] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2723.963335] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2723.964514] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2723.964521] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2723.964527] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2723.964536] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2723.964542] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2723.978295] PM: Some devices failed to suspend
[ 2723.978690] qpnp_chg_resume: DEBUG_____chg_resume
[ 2723.978909] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2723.981345] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2723.981395] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2723.981519] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2723.981809] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2723.981811] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2723.981814] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2723.981819] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2723.986955] [Touch] mxt_resume 
[ 2723.999030] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2723.999035] mdss_dsi_event_handler: unhandled event=8
[ 2723.999038] mdss_dsi_event_handler-:event=8, rc=0
[ 2723.999718] tspdrv: !  tspdrv: resume.
[ 2724.012778] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2724.012822] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2724.012832] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2724.012865] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2724.241149] PM: resume of devices complete after 262.827 msecs
[ 2724.278983] pn544:IRQ GPIO = 0
[ 2724.246824] Restarting tasks ... done.
[ 2724.292996] PM: suspend exit 2017-02-06 18:19:53.269846174 UTC
[ 2724.394229] PM: suspend entry 2017-02-06 18:19:53.371099559 UTC
[ 2724.394243] PM: Syncing filesystems ... done.
[ 2724.397985] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 2724.418178] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2724.421208] Suspending console(s) (use no_console_suspend to debug)
[ 2724.436804] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2724.436843] mdss_dsi_event_handler+:event=7
[ 2724.436850] mdss_dsi_event_handler: unhandled event=7
[ 2724.436857] mdss_dsi_event_handler-:event=7, rc=0
[ 2724.436872] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2724.438920] [apds9130_suspend] Enter
[ 2724.438922] [Touch] mxt_suspend 
[ 2724.438964] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2724.438969] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2724.438975] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2724.438986] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2724.441190] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2724.441203] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2724.441215] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2724.441233] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2724.441243] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2724.453230] PM: Some devices failed to suspend
[ 2724.453929] qpnp_chg_resume: DEBUG_____chg_resume
[ 2724.454293] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2724.458913] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2724.459193] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2724.459612] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2724.460141] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2724.460147] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2724.460153] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2724.460161] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2724.474762] [Touch] mxt_resume 
[ 2724.485928] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2724.485936] mdss_dsi_event_handler: unhandled event=8
[ 2724.485942] mdss_dsi_event_handler-:event=8, rc=0
[ 2724.490779] tspdrv: !  tspdrv: resume.
[ 2724.723955] PM: resume of devices complete after 270.697 msecs
[ 2724.761238] pn544:IRQ GPIO = 0
[ 2724.729535] Restarting tasks ... done.
[ 2724.774759] PM: suspend exit 2017-02-06 18:19:53.751607996 UTC
[ 2725.046478] BMS: adjust_soc: ibat_ua = 61764, vbat_uv = 3757362, ocv_est_uv = 3768973, pc_est = 36, soc_est = 31, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2725.061997] New_cal_SOC = 43, SOC = 43, batt_temp = 289, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 203299, iavg_ua = 102240
[ 2725.062160] PM: suspend entry 2017-02-06 18:19:54.039016121 UTC
[ 2725.062187] PM: Syncing filesystems ... done.
[ 2725.074887] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2725.132806] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2725.134875] Suspending console(s) (use no_console_suspend to debug)
[ 2725.141505] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2725.141526] mdss_dsi_event_handler+:event=7
[ 2725.141530] mdss_dsi_event_handler: unhandled event=7
[ 2725.141532] mdss_dsi_event_handler-:event=7, rc=0
[ 2725.141540] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2725.143830] [apds9130_suspend] Enter
[ 2725.143831] [Touch] mxt_suspend 
[ 2725.143959] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2725.143962] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2725.143965] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2725.143970] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2725.146425] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2725.146432] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2725.146438] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2725.146447] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2725.146452] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2725.160333] PM: Some devices failed to suspend
[ 2725.160605] qpnp_chg_resume: DEBUG_____chg_resume
[ 2725.160688] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2725.163537] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2725.163587] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2725.163711] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2725.163997] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2725.164000] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2725.164003] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2725.164007] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2725.176780] [Touch] mxt_resume 
[ 2725.185217] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2725.185221] mdss_dsi_event_handler: unhandled event=8
[ 2725.185224] mdss_dsi_event_handler-:event=8, rc=0
[ 2725.188770] tspdrv: !  tspdrv: resume.
[ 2725.425979] PM: resume of devices complete after 265.619 msecs
[ 2725.463008] pn544:IRQ GPIO = 0
[ 2725.431361] Restarting tasks ... done.
[ 2725.479003] PM: suspend exit 2017-02-06 18:19:54.455859194 UTC
[ 2725.514471] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2725.514618] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2725.514663] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2725.514767] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2725.580645] PM: suspend entry 2017-02-06 18:19:54.557497319 UTC
[ 2725.580678] PM: Syncing filesystems ... done.
[ 2725.589644] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2725.630703] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2725.632803] Suspending console(s) (use no_console_suspend to debug)
[ 2725.641828] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2725.641849] mdss_dsi_event_handler+:event=7
[ 2725.641853] mdss_dsi_event_handler: unhandled event=7
[ 2725.641856] mdss_dsi_event_handler-:event=7, rc=0
[ 2725.641864] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2725.643156] [apds9130_suspend] Enter
[ 2725.643157] [Touch] mxt_suspend 
[ 2725.643180] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2725.643183] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2725.643186] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2725.643192] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2725.644371] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2725.644377] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2725.644383] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2725.644392] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2725.644398] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2725.657739] PM: Some devices failed to suspend
[ 2725.658132] qpnp_chg_resume: DEBUG_____chg_resume
[ 2725.658352] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2725.660785] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2725.660834] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2725.660959] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2725.661253] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2725.661256] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2725.661259] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2725.661263] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2725.666511] [Touch] mxt_resume 
[ 2725.678607] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2725.678612] mdss_dsi_event_handler: unhandled event=8
[ 2725.678615] mdss_dsi_event_handler-:event=8, rc=0
[ 2725.679294] tspdrv: !  tspdrv: resume.
[ 2725.921411] PM: resume of devices complete after 263.646 msecs
[ 2725.958830] pn544:IRQ GPIO = 0
[ 2725.927058] Restarting tasks ... done.
[ 2725.972771] PM: suspend exit 2017-02-06 18:19:54.949619454 UTC
[ 2726.074209] PM: suspend entry 2017-02-06 18:19:55.051079712 UTC
[ 2726.074223] PM: Syncing filesystems ... done.
[ 2726.088064] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2726.132043] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2726.134120] Suspending console(s) (use no_console_suspend to debug)
[ 2726.138926] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2726.138948] mdss_dsi_event_handler+:event=7
[ 2726.138952] mdss_dsi_event_handler: unhandled event=7
[ 2726.138955] mdss_dsi_event_handler-:event=7, rc=0
[ 2726.138963] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2726.140726] [apds9130_suspend] Enter
[ 2726.140727] [Touch] mxt_suspend 
[ 2726.140748] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2726.140751] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2726.140754] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2726.140879] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2726.143416] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2726.143423] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2726.143428] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2726.143438] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2726.143444] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2726.160015] PM: Some devices failed to suspend
[ 2726.160400] qpnp_chg_resume: DEBUG_____chg_resume
[ 2726.160622] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2726.163063] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2726.163112] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2726.163237] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2726.163530] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2726.163533] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2726.163536] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2726.163540] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2726.175764] [Touch] mxt_resume 
[ 2726.184831] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2726.184835] mdss_dsi_event_handler: unhandled event=8
[ 2726.184838] mdss_dsi_event_handler-:event=8, rc=0
[ 2726.189044] tspdrv: !  tspdrv: resume.
[ 2726.418790] PM: resume of devices complete after 258.749 msecs
[ 2726.455915] pn544:IRQ GPIO = 0
[ 2726.424159] Restarting tasks ... done.
[ 2726.470210] PM: suspend exit 2017-02-06 18:19:55.447060183 UTC
[ 2726.571494] PM: suspend entry 2017-02-06 18:19:55.548364923 UTC
[ 2726.571508] PM: Syncing filesystems ... done.
[ 2726.575003] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2726.606828] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2726.609869] Suspending console(s) (use no_console_suspend to debug)
[ 2726.625549] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2726.625589] mdss_dsi_event_handler+:event=7
[ 2726.625597] mdss_dsi_event_handler: unhandled event=7
[ 2726.625602] mdss_dsi_event_handler-:event=7, rc=0
[ 2726.625618] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2726.627650] [apds9130_suspend] Enter
[ 2726.627652] [Touch] mxt_suspend 
[ 2726.627694] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2726.627699] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2726.627705] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2726.627715] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2726.629911] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2726.629924] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2726.629936] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2726.629953] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2726.629964] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2726.642006] PM: Some devices failed to suspend
[ 2726.642697] qpnp_chg_resume: DEBUG_____chg_resume
[ 2726.643054] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2726.647223] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2726.647500] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2726.647922] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2726.648446] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2726.648452] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2726.648458] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2726.648466] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2726.663042] [Touch] mxt_resume 
[ 2726.674476] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2726.674484] mdss_dsi_event_handler: unhandled event=8
[ 2726.674490] mdss_dsi_event_handler-:event=8, rc=0
[ 2726.677258] tspdrv: !  tspdrv: resume.
[ 2726.916072] PM: resume of devices complete after 274.037 msecs
[ 2726.953160] pn544:IRQ GPIO = 0
[ 2726.921458] Restarting tasks ... done.
[ 2726.969134] PM: suspend exit 2017-02-06 18:19:55.945988204 UTC
[ 2727.014466] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2727.014521] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2727.014536] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2727.014574] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2727.070112] PM: suspend entry 2017-02-06 18:19:56.046982109 UTC
[ 2727.070125] PM: Syncing filesystems ... done.
[ 2727.073578] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 2727.104705] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2727.107822] Suspending console(s) (use no_console_suspend to debug)
[ 2727.123487] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2727.123525] mdss_dsi_event_handler+:event=7
[ 2727.123533] mdss_dsi_event_handler: unhandled event=7
[ 2727.123539] mdss_dsi_event_handler-:event=7, rc=0
[ 2727.123555] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2727.125713] [apds9130_suspend] Enter
[ 2727.125714] [Touch] mxt_suspend 
[ 2727.125757] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2727.125762] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2727.125768] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2727.125778] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2727.127974] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2727.127987] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2727.127999] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2727.128017] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2727.128027] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2727.139955] PM: Some devices failed to suspend
[ 2727.140652] qpnp_chg_resume: DEBUG_____chg_resume
[ 2727.141014] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2727.145290] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2727.145573] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2727.145991] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2727.146690] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2727.146695] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2727.146701] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2727.146710] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2727.161353] [Touch] mxt_resume 
[ 2727.171006] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2727.171014] mdss_dsi_event_handler: unhandled event=8
[ 2727.171020] mdss_dsi_event_handler-:event=8, rc=0
[ 2727.172367] tspdrv: !  tspdrv: resume.
[ 2727.403347] PM: resume of devices complete after 263.363 msecs
[ 2727.440468] pn544:IRQ GPIO = 0
[ 2727.408848] Restarting tasks ... done.
[ 2727.454362] PM: suspend exit 2017-02-06 18:19:56.431212006 UTC
[ 2727.555799] PM: suspend entry 2017-02-06 18:19:56.532669928 UTC
[ 2727.555813] PM: Syncing filesystems ... done.
[ 2727.559261] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 2727.608499] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2727.613151] Suspending console(s) (use no_console_suspend to debug)
[ 2727.625275] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2727.625294] mdss_dsi_event_handler+:event=7
[ 2727.625298] mdss_dsi_event_handler: unhandled event=7
[ 2727.625301] mdss_dsi_event_handler-:event=7, rc=0
[ 2727.625309] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2727.626572] [apds9130_suspend] Enter
[ 2727.626573] [Touch] mxt_suspend 
[ 2727.626594] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2727.626597] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2727.626600] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2727.626606] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2727.627765] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 1 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2727.627772] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2727.627777] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2727.627786] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2727.627791] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2727.641284] PM: Some devices failed to suspend
[ 2727.641678] qpnp_chg_resume: DEBUG_____chg_resume
[ 2727.641898] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2727.644337] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2727.644387] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2727.644510] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2727.644798] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2727.644801] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2727.644804] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2727.644808] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2727.657581] [Touch] mxt_resume 
[ 2727.666015] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2727.666019] mdss_dsi_event_handler: unhandled event=8
[ 2727.666022] mdss_dsi_event_handler-:event=8, rc=0
[ 2727.669105] tspdrv: !  tspdrv: resume.
[ 2727.903554] PM: resume of devices complete after 262.244 msecs
[ 2727.940728] pn544:IRQ GPIO = 0
[ 2727.909006] Restarting tasks ... done.
[ 2727.955870] PM: suspend exit 2017-02-06 18:19:56.932719714 UTC
[ 2728.057727] PM: suspend entry 2017-02-06 18:19:57.034598047 UTC
[ 2728.057741] PM: Syncing filesystems ... done.
[ 2728.071520] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 2728.125217] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 2728.127286] Suspending console(s) (use no_console_suspend to debug)
[ 2728.136168] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2728.136188] mdss_dsi_event_handler+:event=7
[ 2728.136191] mdss_dsi_event_handler: unhandled event=7
[ 2728.136194] mdss_dsi_event_handler-:event=7, rc=0
[ 2728.136202] mdss_fb_blank_sub: mdss_fb_suspend_sub+0x88/0x108: blank_mode=4
[ 2728.137464] [apds9130_suspend] Enter
[ 2728.137464] [Touch] mxt_suspend 
[ 2728.137486] [LP5521] [lp5521_suspend] id_pattern_play = 0
[ 2728.137489] [LP5521] [lp5521_suspend] RGB_EN set to LOW
[ 2728.137492] [LP5521] LP5521: [lp5521_enable] state = 0
[ 2728.137497] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to LOW
[ 2728.138655] wlan: [11600:E :HDD] hdd_is_apps_power_collapse_allowed: do not allow APPS power collapse-pmcState = 5 scanRspPending = 0 inMiddleOfRoaming = 0
[ 2728.138661] wlan: [11600:E :HDD] wlan_suspend: Fail wlan suspend: not in IMPS/BMPS
[ 2728.138667] wlan: [11600:F :HDD] hddDevSuspendHdlr: Not able to suspend wlan
[ 2728.138676] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -1
[ 2728.138681] PM: Device fb000000.qcom,wcnss-wlan failed to suspend: error -1
[ 2728.152142] PM: Some devices failed to suspend
[ 2728.152533] qpnp_chg_resume: DEBUG_____chg_resume
[ 2728.152753] qup_i2c f9925000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2728.155199] qup_i2c f9926000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2728.155248] qup_i2c f9927000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2728.155372] qup_i2c f9924000.i2c: i2c is runtime suspended status !!! try to runtime resume !!!
[ 2728.155660] [LP5521] [lp5521_resume] id_pattern_play = 0
[ 2728.155663] [LP5521] [lp5521_resume] RGB_EN set to HIGH
[ 2728.155666] [LP5521] LP5521: [lp5521_enable] state = 1
[ 2728.155670] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #112) set to HIGH
[ 2728.168468] [Touch] mxt_resume 
[ 2728.179050] [apds9130_resume] Entermdss_dsi_event_handler+:event=8
[ 2728.179054] mdss_dsi_event_handler: unhandled event=8
[ 2728.179057] mdss_dsi_event_handler-:event=8, rc=0
[ 2728.179737] tspdrv: !  tspdrv: resume.
[ 2728.192308] qpnp_pon_input_dispatch:code(116), value(1)
[ 2728.351227] qpnp_pon_input_dispatch:code(116), value(0)
[ 2728.413705] PM: resume of devices complete after 261.541 msecs
[ 2728.451740] pn544:IRQ GPIO = 0
[ 2728.419296] Restarting tasks ... done.
[ 2728.497298] PM: suspend exit 2017-02-06 18:19:57.474167682 UTC
[ 2728.511565] mdss_fb_blank_sub: fb_blank+0x38/0x6c: blank_mode=0
[ 2728.511580] mdss_dsi_event_handler+:event=8
[ 2728.511583] mdss_dsi_event_handler: unhandled event=8
[ 2728.511586] mdss_dsi_event_handler-:event=8, rc=0
[ 2728.512831] mdss_dsi_event_handler+:event=1
[ 2728.512834] mdss_dsi_event_handler: unhandled event=1
[ 2728.512837] mdss_dsi_event_handler-:event=1, rc=0
[ 2728.513548] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2728.513593] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2728.513602] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2728.513635] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2728.520959] mdss_dsi_event_handler+:event=2
[ 2728.520965] mdss_dsi_on+: ctrl=e82d8010 ndx=0
[ 2728.520969] mdss_dsi_panel_power_on: enable=1
[ 2728.520972] power_data.num_gpio=0,power_data.num_vreg=3
[ 2728.597497] wlan: [13685:E :HDD] hdd_conf_arp_offload: 
[ 2728.597497] 
[ 2728.638775]  panel reset after mipi stop state. lane_ctrl value = 0
[ 2728.638779] mdss_dsi_on-:
[ 2728.638790] mdss_dsi_panel_on+: ctrl=e82d8010 ndx=0
[ 2728.705095] sending diplay on code
[ 2728.881516] mdss_dsi_panel_on:-
[ 2728.881522] mdss_dsi_event_handler-:event=2, rc=0
[ 2728.882008] mdss_dsi_event_handler+:event=3
[ 2728.882012] mdss_dsi_event_handler-:event=3, rc=0
[ 2728.882049] [Touch] mxt_fb_resume 
[ 2728.882058] [Touch] mxt_start 
[ 2728.882336] [Touch] Set T7 ACTV:255 IDLE:16
[ 2728.882341] [Touch] Patch event 6
[ 2728.889427] [Touch] Release all event 
[ 2728.890569] mdss_dsi_panel_bl_ctrl: backlight ON!
[ 2728.903698] [Touch] T6 Status 0x10 CAL
[ 2728.903745] [Touch] Release all event 
[ 2728.921382] [Touch] MXT_PROCG_NOISESUPPRESSION_T72
[ 2728.934667] [Touch] T6 Status 0x00 OK
[ 2728.995223] [Touch] current dianostic chip mode is 49
[ 2729.055215] [Touch] current dianostic chip mode is 17
[ 2729.205566] [Touch] Err Cnt is 0, limit Cnt is 3
[ 2730.013047] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2730.013102] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2730.013117] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2730.013154] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2730.741565] [Touch] 1 finger pressed <0> : x[308] y[956] z[ 19] area[  2]
[ 2731.057159] pn544:write: pn544_write len=:9
[ 2731.057260] qup_i2c f9925000.i2c: QUP: I2C status flags :0xc1300c8, irq:129
[ 2731.057291] qup_i2c f9925000.i2c: I2C slave addr:0x28 not connected
[ 2731.057309] pn544_dev_write : i2c_master_send returned -107
[ 2731.067482] pn544:write: pn544_write len=:9
[ 2731.072041] pn544:pn544_dev_irq_handler : 337
[ 2731.073829] pn544:IRQ GPIO = 1
[ 2731.074357] pn544:IRQ GPIO = 0
[ 2731.074928] pn544:write: pn544_write len=:8
[ 2731.076483] pn544:write: pn544_write len=:4
[ 2731.080599] pn544:pn544_dev_irq_handler : 337
[ 2731.080940] pn544:IRQ GPIO = 1
[ 2731.081374] pn544:IRQ GPIO = 0
[ 2731.083027] pn544:pn544_dev_irq_handler : 337
[ 2731.083390] pn544:IRQ GPIO = 1
[ 2731.083798] pn544:IRQ GPIO = 0
[ 2731.085758] pn544:write: pn544_write len=:8
[ 2731.086866] pn544:write: pn544_write len=:4
[ 2731.090504] pn544:pn544_dev_irq_handler : 337
[ 2731.090814] pn544:IRQ GPIO = 1
[ 2731.091358] pn544:IRQ GPIO = 0
[ 2731.091918] pn544:write: pn544_write len=:8
[ 2731.093200] pn544:pn544_dev_irq_handler : 337
[ 2731.093426] pn544:write: pn544_write len=:4
[ 2731.093983] pn544:IRQ GPIO = 1
[ 2731.094303] pn544:IRQ GPIO = 0
[ 2731.094862] pn544:write: pn544_write len=:8
[ 2731.096060] pn544:write: pn544_write len=:4
[ 2731.096138] pn544:pn544_dev_irq_handler : 337
[ 2731.096641] pn544:IRQ GPIO = 1
[ 2731.097084] pn544:IRQ GPIO = 0
[ 2731.097637] pn544:write: pn544_write len=:6
[ 2731.098962] pn544:write: pn544_write len=:4
[ 2731.103218] pn544:pn544_dev_irq_handler : 337
[ 2731.103500] pn544:IRQ GPIO = 1
[ 2731.103779] pn544:IRQ GPIO = 0
[ 2731.391694] send sigkill to 17475 (posed.installer), adj 1000, size 6808
[ 2731.510952] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2731.511017] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2731.511033] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2731.511074] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2733.012026] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2733.012077] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2733.012092] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2733.012129] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2733.409769] [Touch] 1 finger pressed <0> : x[ 79] y[646] z[ 45] area[  3]
[ 2734.512012] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2734.512067] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2734.512082] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2734.512119] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2734.714487] [Touch] 1 finger pressed <0> : x[106] y[603] z[ 45] area[  4]
[ 2736.012040] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2736.012095] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2736.012110] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2736.012147] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2736.554725] [Touch] 1 finger pressed <0> : x[274] y[780] z[ 26] area[  4]
[ 2736.898847] send sigkill to 18015 (ndroid.settings), adj 1000, size 12624
[ 2737.038461] event_handler: reclaimed all bufs
[ 2737.512030] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2737.512088] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2737.512103] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2737.512141] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2738.183165] LGE charging scenario : state 0 -> 0(0-0), temp=292, volt=3691, BTM=0, charger=0, cur_set=1500/1500
[ 2738.238916] healthd: bms: Unknown power supply type
[ 2738.742309] type=1400 audit(1486405207.702:11183): avc:  denied  { search } for  pid=20147 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.742498] type=1400 audit(1486405207.702:11184): avc:  denied  { search } for  pid=20147 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.742574] type=1400 audit(1486405207.702:11183): avc: denied { search } for pid=20147 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.743275] type=1400 audit(1486405207.702:11184): avc: denied { search } for pid=20147 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.743628] type=1400 audit(1486405207.702:11185): avc:  denied  { search } for  pid=20161 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.743750] type=1400 audit(1486405207.702:11186): avc:  denied  { search } for  pid=20161 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.743785] type=1400 audit(1486405207.702:11185): avc: denied { search } for pid=20161 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.743943] type=1400 audit(1486405207.702:11187): avc:  denied  { search } for  pid=20161 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.744377] type=1400 audit(1486405207.702:11188): avc:  denied  { search } for  pid=20147 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.744485] type=1400 audit(1486405207.702:11186): avc: denied { search } for pid=20161 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.744514] type=1400 audit(1486405207.702:11189): avc:  denied  { search } for  pid=20147 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.745470] type=1400 audit(1486405207.712:11190): avc:  denied  { search } for  pid=20162 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.745623] type=1400 audit(1486405207.712:11191): avc:  denied  { search } for  pid=20162 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.750026] type=1400 audit(1486405207.702:11187): avc: denied { search } for pid=20161 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.750908] type=1400 audit(1486405207.702:11188): avc: denied { search } for pid=20147 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.751176] type=1400 audit(1486405207.702:11189): avc: denied { search } for pid=20147 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.751334] type=1400 audit(1486405207.712:11190): avc: denied { search } for pid=20162 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.752069] type=1400 audit(1486405207.712:11191): avc: denied { search } for pid=20162 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.752707] type=1400 audit(1486405207.712:11192): avc: denied { search } for pid=20162 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 2738.782796] type=1400 audit(1486405207.742:11193): avc: denied { search } for pid=20147 comm="dboxed_process0" name="tmp" dev="mmcblk0p34" ino=38 scontext=u:r:isolated_app:s0:c512,c768 tcontext=u:object_r:shell_data_file:s0 tclass=dir permissive=0
[ 2739.012056] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2739.012115] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2739.012130] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2739.012169] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2739.999001] send sigkill to 17954 (id.defcontainer), adj 1000, size 6321
[ 2740.511038] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2740.511093] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2740.511108] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2740.511145] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2742.014401] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2742.014566] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2742.014620] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2742.014745] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2743.513522] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2743.513688] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2743.513743] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2743.513868] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2745.014053] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2745.014108] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2745.014123] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2745.014161] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2745.082371] BMS: adjust_soc: ibat_ua = 256427, vbat_uv = 3719955, ocv_est_uv = 3768163, pc_est = 36, soc_est = 31, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2745.096455] New_cal_SOC = 43, SOC = 43, batt_temp = 292, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 204746, iavg_ua = 260460
[ 2746.514510] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2746.514686] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2746.514741] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2746.514869] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2748.015556] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2748.015732] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2748.015786] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2748.015917] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2749.524085] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2749.524142] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2749.524157] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2749.524195] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2750.705783] migrate_irqs: 5 callbacks suppressed
[ 2750.705823] IRQ40 no longer affine to CPU1
[ 2751.023454] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2751.023618] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2751.023672] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2751.023797] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2752.523400] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2752.523574] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2752.523629] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2752.523757] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2754.023478] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2754.023636] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2754.023689] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2754.023811] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2755.520922] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2755.520978] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2755.520993] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2755.521030] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2757.022107] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2757.022273] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2757.022327] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2757.022457] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2758.524188] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2758.524386] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2758.524440] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2758.524568] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2759.510116] IRQ40 no longer affine to CPU1
[ 2760.024200] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2760.024372] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2760.024426] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2760.024557] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2761.521047] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2761.521221] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2761.521274] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2761.521395] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2763.023475] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2763.023633] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2763.023685] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2763.023806] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2764.524446] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2764.524605] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2764.524658] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2764.524780] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2765.084874] BMS: adjust_soc: ibat_ua = 137145, vbat_uv = 3739395, ocv_est_uv = 3765178, pc_est = 35, soc_est = 30, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2765.100795] New_cal_SOC = 43, SOC = 43, batt_temp = 292, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 205635, iavg_ua = 160020
[ 2766.025183] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2766.025301] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2766.025330] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2766.025405] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2766.035503] send sigkill to 19189 (le.android.talk), adj 1000, size 13008
[ 2767.111990] IRQ40 no longer affine to CPU2
[ 2767.531244] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2767.531399] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2767.531451] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2767.531571] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2767.621300] IRQ40 no longer affine to CPU1
[ 2769.026372] IRQ40 no longer affine to CPU1
[ 2769.031175] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2769.031326] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2769.031378] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2769.031498] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2770.535212] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2770.535386] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2770.535441] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2770.535570] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2772.044622] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2772.044768] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2772.044811] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2772.044916] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2773.554584] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2773.554753] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2773.554808] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2773.554934] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2775.063522] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2775.063696] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2775.063750] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2775.063878] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2775.469689] IRQ40 no longer affine to CPU2
[ 2776.564450] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2776.564620] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2776.564674] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2776.564796] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2778.064333] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2778.064507] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2778.064562] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2778.064693] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2779.564484] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2779.564654] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2779.564709] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2779.564834] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2781.063197] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2781.063338] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2781.063380] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2781.063484] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2782.565636] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2782.565812] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2782.565868] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2782.565996] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2784.074112] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2784.074167] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2784.074182] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2784.074219] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2785.085697] BMS: adjust_soc: ibat_ua = 174836, vbat_uv = 3735273, ocv_est_uv = 3768142, pc_est = 36, soc_est = 31, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2785.101117] New_cal_SOC = 43, SOC = 43, batt_temp = 292, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 206536, iavg_ua = 162180
[ 2785.573426] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2785.573601] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2785.573654] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2785.573782] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2787.072019] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2787.072071] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2787.072086] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2787.072123] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2788.572009] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2788.572063] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2788.572078] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2788.572114] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2788.612837] qpnp_chg_usb_usbin_valid_irq_handler: [DEBUG] usbin-valid triggered: 1 host_mode: 0
[ 2788.612945] qpnp_chg_resume_check_work: qpnp_chg_resume_check_work, chagerin=1, batt_status=3
[ 2788.612955] qpnp_chg_vbatdet_set: qpnp_chg_vbatdet_set voltage=4450 setting 3c
[ 2788.612973] qpnp_chg_charge_en: charging enabled
[ 2788.613114] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
[ 2788.613123] qpnp_batt_external_power_changed: [LGE] power_supply_type = 0
[ 2788.615624] msm_otg f9a55000.usb: USB exited from low power mode
[ 2788.669986] healthd: bms: Unknown power supply type
[ 2788.720801] BMS: adjust_soc: ibat_ua = 189106, vbat_uv = 3729381, ocv_est_uv = 3764932, pc_est = 35, soc_est = 30, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2788.734745] New_cal_SOC = 43, SOC = 43, batt_temp = 292, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 206702, iavg_ua = 149400
[ 2788.758980] healthd: bms: Unknown power supply type
[ 2788.809514] lge_pm_get_cable_usb_id_adc: adc read value is 1788701
[ 2788.809531] 
[ 2788.809531] 
[ 2788.809531] [PM]Cable detected: 1788701(OPEN)(1200, 500)
[ 2788.809531] 
[ 2788.809689] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
[ 2788.809696] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 2788.809871] msm_otg f9a55000.usb: Avail curr from USB = 500
[ 2788.809878] 
[ 2788.809878] [LGE] msm_otg_notify_power_supply: power_supply_get_by_name(usb)
[ 2788.809896] [Touch] Patch event 0
[ 2788.813740] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[ 2788.813767] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
[ 2788.817145] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 2788.817155] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 2788.817208] qpnp_chg_iusbmax_set: [LGE] qpnp_chg_iusbmax_set, current = 500
[ 2788.817215] qpnp_chg_iusbmax_set: current=500 setting 0x5
[ 2788.843170] [Touch] T6 Status 0x10 CAL
[ 2788.843206] [Touch] Release all event 
[ 2788.854378] [Touch] T6 Status 0x00 OK
[ 2788.870987] healthd: bms: Unknown power supply type
[ 2788.913955] healthd: bms: Unknown power supply type
[ 2788.915019] [Touch] current dianostic chip mode is 49
[ 2788.969394] healthd: bms: Unknown power supply type
[ 2788.975009] [Touch] current dianostic chip mode is 17
[ 2789.016692] send sigkill to 19473 (ogle.android.gm), adj 1000, size 12785
[ 2789.020136] healthd: bms: Unknown power supply type
[ 2789.085514] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 2789.085530] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 2789.085962] android_work: did not send uevent (0 0   (null))
[ 2789.125352] [Touch] Err Cnt is 0, limit Cnt is 3
[ 2789.142292] healthd: bms: Unknown power supply type
[ 2789.157580] android_work: sent uevent USB_STATE=CONNECTED
[ 2789.161083] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 2789.161097] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 2789.161276] android_work: sent uevent USB_STATE=DISCONNECTED
[ 2789.212442] healthd: bms: Unknown power supply type
[ 2789.238641] healthd: bms: Unknown power supply type
[ 2789.253962] android_work: sent uevent USB_STATE=CONNECTED
[ 2789.256871] android_usb gadget: high-speed config #1: fe8050c8.android_usb
[ 2789.257012] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 2789.257021] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 2789.281603] healthd: bms: Unknown power supply type
[ 2789.315103] android_work: sent uevent USB_STATE=CONFIGURED
[ 2789.332532] healthd: bms: Unknown power supply type
[ 2789.389389] healthd: bms: Unknown power supply type
[ 2789.623561] LGE charging scenario : state 0 -> 0(0-1), temp=291, volt=3762, BTM=0, charger=1, cur_set=1500/1500
[ 2789.687935] healthd: bms: Unknown power supply type
[ 2789.729401] mtp_open : not factory mode, mtp open
[ 2789.729416] mtp_open
[ 2790.070943] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2790.070999] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2790.071014] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2790.071051] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2790.318518] send sigkill to 17992 (id.gms.unstable), adj 1000, size 12753
[ 2790.509420] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 1
[ 2790.509447] qpnp_chg_vbatdet_set: qpnp_chg_vbatdet_set voltage=4250 setting 32
[ 2790.509505] qpnp_chg_chgr_chg_fastchg_irq_handler: === [FAST CHG IRQ] DCP = 0, SDP = 1 ===
[ 2790.509524] qpnp_chg_chgr_chg_fastchg_irq_handler: [FAST CHG IRQ] SDP CABLE - Ext. OVP is LOW
[ 2790.509743] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 2790.509752] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 2790.592107] healthd: bms: Unknown power supply type
[ 2790.594035] [LP5521] [store_led_blink] rgb=0x000000, on=0, off=0
[ 2790.704694] BMS: adjust_soc: ibat_ua = -165032, vbat_uv = 3828000, ocv_est_uv = 3796974, pc_est = 45, soc_est = 40, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2790.709757] healthd: bms: Unknown power supply type
[ 2790.738483] New_cal_SOC = 43, SOC = 43, batt_temp = 288, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 206719, iavg_ua = 30600
[ 2790.747923] healthd: bms: Unknown power supply type
[ 2790.964758] send sigkill to 19336 (com.Slack), adj 1000, size 10872
[ 2791.153491] type=1400 audit(1486405260.112:11194): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.153595] type=1400 audit(1486405260.112:11194): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.154431] type=1400 audit(1486405260.112:11195): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.154659] type=1400 audit(1486405260.112:11196): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.154730] type=1400 audit(1486405260.112:11195): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.154880] type=1400 audit(1486405260.112:11196): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.155342] type=1400 audit(1486405260.122:11197): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.155554] type=1400 audit(1486405260.122:11198): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.155767] type=1400 audit(1486405260.122:11199): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.155989] type=1400 audit(1486405260.122:11200): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.156210] type=1400 audit(1486405260.122:11201): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.156417] type=1400 audit(1486405260.122:11202): avc:  denied  { read } for  pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.162714] type=1400 audit(1486405260.122:11197): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.162915] type=1400 audit(1486405260.122:11198): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.163070] type=1400 audit(1486405260.122:11199): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.163215] type=1400 audit(1486405260.122:11200): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.163352] type=1400 audit(1486405260.122:11201): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.163491] type=1400 audit(1486405260.122:11202): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.163632] type=1400 audit(1486405260.122:11203): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.163770] type=1400 audit(1486405260.122:11204): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.163903] type=1400 audit(1486405260.122:11205): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.164042] type=1400 audit(1486405260.122:11206): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.164171] type=1400 audit(1486405260.122:11207): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.164300] type=1400 audit(1486405260.122:11208): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.164431] type=1400 audit(1486405260.122:11209): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.164581] type=1400 audit(1486405260.122:11210): avc: denied { read } for pid=20523 comm="mount" name="/" dev="tmpfs" ino=6145 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 2791.570888] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2791.570944] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2791.570960] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2791.570998] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2792.185007] wlan: [13672:E :HDD] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
[ 2793.070896] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2793.070952] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2793.070968] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2793.071005] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2794.573071] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2794.573247] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2794.573304] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2794.573435] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2796.070908] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2796.070964] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2796.070979] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2796.071019] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2797.573065] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2797.573221] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2797.573278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2797.573401] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2798.625109] qpnp_chg_charge_en: charging enabled
[ 2799.071147] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2799.071308] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2799.071365] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2799.071492] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2800.574452] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2800.574520] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2800.574539] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2800.574582] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2802.071910] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2802.071969] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2802.071986] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2802.072030] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2803.571905] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2803.571960] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2803.571975] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2803.572013] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2805.071092] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2805.071263] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2805.071321] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2805.071452] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2805.080998] BMS: adjust_soc: ibat_ua = -341721, vbat_uv = 3834825, ocv_est_uv = 3770582, pc_est = 37, soc_est = 32, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2805.095213] New_cal_SOC = 43, SOC = 43, batt_temp = 290, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 205620, iavg_ua = -282600
[ 2806.572356] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2806.572508] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2806.572564] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2806.572689] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2808.072119] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2808.072278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2808.072334] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2808.072460] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2808.645173] qpnp_chg_charge_en: charging enabled
[ 2809.572095] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2809.572261] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2809.572319] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2809.572448] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2811.072136] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2811.072295] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2811.072351] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2811.072477] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2812.514534] init: Untracked pid 20633 exited with status 1
[ 2812.571911] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2812.571963] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2812.571979] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2812.572017] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2814.071917] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2814.071970] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2814.071986] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2814.072023] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2815.571102] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2815.571265] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2815.571323] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2815.571456] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2816.177343] init: Untracked pid 20652 exited with status 1
[ 2817.072066] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2817.072227] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2817.072285] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2817.072412] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2818.572949] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2818.573110] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2818.573167] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2818.573295] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2818.685142] qpnp_chg_charge_en: charging enabled
[ 2819.902553] init: Untracked pid 20662 exited with status 1
[ 2820.071941] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2820.071994] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2820.072010] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2820.072048] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2821.572095] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2821.572257] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2821.572313] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2821.572443] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2823.072120] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2823.072289] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2823.072346] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2823.072473] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2824.572107] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2824.572278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2824.572335] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2824.572466] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2825.079100] BMS: adjust_soc: ibat_ua = -320697, vbat_uv = 3834825, ocv_est_uv = 3774534, pc_est = 38, soc_est = 33, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2825.093165] New_cal_SOC = 43, SOC = 43, batt_temp = 292, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 203745, iavg_ua = -337500
[ 2826.072087] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2826.072241] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2826.072301] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2826.072428] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2827.572039] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2827.572178] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2827.572225] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2827.572330] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2828.725101] qpnp_chg_charge_en: charging enabled
[ 2829.072113] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2829.072275] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2829.072332] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2829.072465] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2830.572054] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2830.572204] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2830.572262] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2830.572387] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2832.072062] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2832.072222] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2832.072278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2832.072407] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2833.572087] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2833.572249] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2833.572307] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2833.572437] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2835.072065] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2835.072225] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2835.072282] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2835.072409] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2836.573072] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2836.573238] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2836.573295] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2836.573426] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2838.072141] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2838.072294] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2838.072350] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2838.072476] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2838.765120] qpnp_chg_charge_en: charging enabled
[ 2839.572089] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2839.572246] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2839.572304] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2839.572431] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2841.072087] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2841.072244] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2841.072300] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2841.072426] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2842.574075] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2842.574262] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2842.574319] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2842.574445] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2844.073446] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2844.073603] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2844.073659] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2844.073782] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2845.081977] BMS: adjust_soc: ibat_ua = -330610, vbat_uv = 3841599, ocv_est_uv = 3779445, pc_est = 40, soc_est = 35, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2845.096164] New_cal_SOC = 43, SOC = 43, batt_temp = 293, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 201844, iavg_ua = -342180
[ 2845.571945] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2845.571997] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2845.572012] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2845.572049] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2847.072118] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2847.072272] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2847.072329] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2847.072451] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2848.572092] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2848.572236] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2848.572292] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2848.572414] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2848.805115] qpnp_chg_charge_en: charging enabled
[ 2849.435952] mdss_dsi_panel_bl_ctrl: backlight OFF!
[ 2849.552847] mdss_fb_blank_sub: fb_blank+0x38/0x6c: blank_mode=4
[ 2849.559228] mdss_dsi_event_handler+:event=4
[ 2849.559232] mdss_dsi_blank+:
[ 2849.559242] mdss_dsi_panel_off+: ctrl=e82d8010 ndx=0
[ 2849.630468] mdss_dsi_panel_off:-
[ 2849.630472] mdss_dsi_blank-:End
[ 2849.630479] mdss_dsi_event_handler-:event=4, rc=0
[ 2849.630582] mdss_dsi_event_handler+:event=5
[ 2849.630589] mdss_dsi_off+: ctrl=e82d8010 ndx=0
[ 2849.657930] mdss_dsi_panel_power_on: enable=0
[ 2849.659104] mdss_dsi_off-:
[ 2849.659108] mdss_dsi_event_handler-:event=5, rc=0
[ 2849.660269] [Touch] mxt_fb_suspend 
[ 2849.660276] [Touch] mxt_stop 
[ 2849.660280] [Touch] Patch event 3
[ 2849.660361] mdss_dsi_event_handler+:event=7
[ 2849.660365] mdss_dsi_event_handler: unhandled event=7
[ 2849.660367] mdss_dsi_event_handler-:event=7, rc=0
[ 2849.665214] [Touch] Release all event 
[ 2849.666174] [Touch] T6 Status 0x10 CAL
[ 2849.666212] [Touch] Release all event 
[ 2849.685229] [Touch] T6 Status 0x00 OK
[ 2849.695998] wlan: [13685:E :HDD] hdd_conf_arp_offload: 
[ 2849.695998] 
[ 2849.717206] pn544:write: pn544_write len=:9
[ 2849.717299] qup_i2c f9925000.i2c: QUP: I2C status flags :0xc1300c8, irq:129
[ 2849.717350] qup_i2c f9925000.i2c: I2C slave addr:0x28 not connected
[ 2849.717371] pn544_dev_write : i2c_master_send returned -107
[ 2849.727476] pn544:write: pn544_write len=:9
[ 2849.733113] pn544:pn544_dev_irq_handler : 337
[ 2849.733465] pn544:IRQ GPIO = 1
[ 2849.733693] pn544:IRQ GPIO = 0
[ 2849.747724] pn544:pn544_dev_irq_handler : 337
[ 2849.748282] pn544:IRQ GPIO = 1
[ 2849.748684] pn544:IRQ GPIO = 0
[ 2849.749250] pn544:write: pn544_write len=:8
[ 2849.750510] pn544:write: pn544_write len=:4
[ 2849.754954] pn544:pn544_dev_irq_handler : 337
[ 2849.757723] pn544:IRQ GPIO = 1
[ 2849.758038] pn544:IRQ GPIO = 0
[ 2849.774902] pn544:pn544_dev_irq_handler : 337
[ 2849.776296] pn544:IRQ GPIO = 1
[ 2849.776657] pn544:IRQ GPIO = 0
[ 2849.777310] pn544:write: pn544_write len=:8
[ 2849.779443] LGE charging scenario : state 0 -> 0(0-0), temp=296, volt=3792, BTM=0, charger=1, cur_set=1500/1500
[ 2849.779860] pn544:write: pn544_write len=:4
[ 2849.781645] pn544:pn544_dev_irq_handler : 337
[ 2849.782388] pn544:IRQ GPIO = 1
[ 2849.782757] pn544:IRQ GPIO = 0
[ 2849.783332] pn544:write: pn544_write len=:8
[ 2849.784316] pn544:pn544_dev_irq_handler : 337
[ 2849.787965] pn544:write: pn544_write len=:4
[ 2849.788252] pn544:IRQ GPIO = 1
[ 2849.788638] pn544:IRQ GPIO = 0
[ 2849.790101] pn544:write: pn544_write len=:8
[ 2849.791109] pn544:pn544_dev_irq_handler : 337
[ 2849.791360] pn544:write: pn544_write len=:4
[ 2849.791735] pn544:IRQ GPIO = 1
[ 2849.792309] pn544:IRQ GPIO = 0
[ 2849.794638] pn544:write: pn544_write len=:4
[ 2849.855907] healthd: bms: Unknown power supply type
[ 2850.070936] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2850.071038] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2850.071054] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2850.071093] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2851.571116] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2851.571273] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2851.571331] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2851.571460] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2853.072079] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2853.072237] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2853.072293] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2853.072420] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2854.570888] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2854.570944] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2854.570960] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2854.570998] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2856.070917] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2856.070969] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2856.070985] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2856.071023] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2857.571684] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2857.571846] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2857.571904] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2857.572036] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2858.845223] qpnp_chg_charge_en: charging enabled
[ 2859.072109] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2859.072245] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2859.072300] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2859.072416] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2860.572122] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2860.572280] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2860.572336] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2860.572461] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2862.072183] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2862.072334] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2862.072390] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2862.072514] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2863.572093] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2863.572232] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2863.572288] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2863.572406] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2865.072098] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2865.072267] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2865.072324] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2865.072457] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2865.081011] BMS: adjust_soc: ibat_ua = -398366, vbat_uv = 3854559, ocv_est_uv = 3779667, pc_est = 40, soc_est = 35, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2865.095135] New_cal_SOC = 43, SOC = 43, batt_temp = 294, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 199838, iavg_ua = -361080
[ 2866.572102] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2866.572244] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2866.572301] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2866.572424] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2868.072124] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2868.072261] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2868.072315] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2868.072435] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2868.885202] qpnp_chg_charge_en: charging enabled
[ 2869.572103] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2869.572248] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2869.572303] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2869.572427] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2871.072688] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2871.072853] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2871.072910] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2871.073040] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2872.572125] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2872.572277] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2872.572334] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2872.572460] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2874.072091] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2874.072225] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2874.072279] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2874.072396] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2875.572072] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2875.572247] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2875.572305] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2875.572437] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2876.655701] send sigkill to 20452 (oid.apps.photos), adj 1000, size 11747
[ 2876.761024] send sigkill to 18501 (stagram.android), adj 1000, size 8750
[ 2877.070895] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2877.070953] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2877.070969] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2877.071007] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2878.571060] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2878.571225] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2878.571283] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2878.571416] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2878.925101] qpnp_chg_charge_en: charging enabled
[ 2880.071915] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2880.071973] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2880.071989] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2880.072027] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2881.572072] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2881.572239] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2881.572296] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2881.572428] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2883.072055] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2883.072199] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2883.072255] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2883.072379] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2884.572099] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2884.572261] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2884.572319] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2884.572448] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2885.078686] BMS: adjust_soc: ibat_ua = -382352, vbat_uv = 3853674, ocv_est_uv = 3781792, pc_est = 40, soc_est = 35, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2885.092031] New_cal_SOC = 43, SOC = 43, batt_temp = 295, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 197797, iavg_ua = -367380
[ 2886.072087] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2886.072259] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2886.072317] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2886.072450] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2887.574679] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2887.574830] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2887.574889] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2887.575160] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2888.965138] qpnp_chg_charge_en: charging enabled
[ 2889.082110] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2889.082249] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2889.082304] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2889.082425] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2890.582098] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2890.582250] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2890.582307] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2890.582434] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2892.082090] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2892.082260] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2892.082317] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2892.082450] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2893.582047] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2893.582201] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2893.582259] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2893.582383] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2895.082067] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2895.082221] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2895.082277] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2895.082401] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2896.583034] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2896.583177] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2896.583233] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2896.583352] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2898.082081] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2898.082238] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2898.082295] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2898.082422] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2899.005173] qpnp_chg_charge_en: charging enabled
[ 2899.582037] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2899.582184] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2899.582240] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2899.582361] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2901.082090] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2901.082261] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2901.082320] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2901.082453] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2902.582108] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2902.582260] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2902.582317] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2902.582442] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2904.082097] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2904.082232] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2904.082287] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2904.082403] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2905.081332] BMS: adjust_soc: ibat_ua = -393464, vbat_uv = 3859269, ocv_est_uv = 3785298, pc_est = 42, soc_est = 37, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2905.095378] New_cal_SOC = 43, SOC = 43, batt_temp = 296, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 195551, iavg_ua = -404280
[ 2905.582085] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2905.582223] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2905.582279] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2905.582397] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2907.082076] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2907.082247] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2907.082304] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2907.082435] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2908.581077] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2908.581234] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2908.581292] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2908.581421] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2909.045174] qpnp_chg_charge_en: charging enabled
[ 2909.938869] LGE charging scenario : state 0 -> 0(0-0), temp=296, volt=3856, BTM=0, charger=1, cur_set=1500/1500
[ 2910.008637] healthd: bms: Unknown power supply type
[ 2910.081933] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2910.081990] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2910.082006] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2910.082045] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2911.582093] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2911.582259] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2911.582317] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2911.582446] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2913.082091] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2913.082231] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2913.082287] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2913.082411] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2914.582070] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2914.582216] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2914.582272] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2914.582394] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2916.082063] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2916.082198] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2916.082252] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2916.082370] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2917.582105] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2917.582260] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2917.582318] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2917.582446] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2919.082120] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2919.082257] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2919.082312] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2919.082428] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2919.085121] qpnp_chg_charge_en: charging enabled
[ 2920.582093] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2920.582245] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2920.582301] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2920.582422] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2922.082060] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2922.082208] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2922.082263] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2922.082387] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2923.582052] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2923.582199] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2923.582256] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2923.582380] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2925.080464] BMS: adjust_soc: ibat_ua = -399673, vbat_uv = 3861627, ocv_est_uv = 3786489, pc_est = 42, soc_est = 37, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2925.082065] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2925.082214] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2925.082269] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2925.082395] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2925.090444] New_cal_SOC = 44, SOC = 44, batt_temp = 296, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 193333, iavg_ua = -399240
[ 2925.090518] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 2925.090549] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 2925.188947] healthd: bms: Unknown power supply type
[ 2925.259389] healthd: bms: Unknown power supply type
[ 2926.582117] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2926.582283] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2926.582340] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2926.582472] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2928.081114] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2928.081282] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2928.081341] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2928.081474] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2929.125555] qpnp_chg_charge_en: charging enabled
[ 2929.582089] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2929.582232] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2929.582289] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2929.582414] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2931.082149] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2931.082300] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2931.082357] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2931.082482] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2932.582096] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2932.582235] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2932.582291] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2932.582409] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2934.082279] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2934.082447] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2934.082504] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2934.082633] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2935.582105] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2935.582244] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2935.582299] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2935.582415] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2937.082084] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2937.082230] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2937.082285] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2937.082408] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2938.582111] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2938.582270] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2938.582327] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2938.582454] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2939.165209] qpnp_chg_charge_en: charging enabled
[ 2940.082094] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2940.082232] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2940.082287] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2940.082408] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2941.582102] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2941.582246] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2941.582301] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2941.582426] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2943.082087] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2943.082220] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2943.082275] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2943.082390] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2944.582089] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2944.582225] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2944.582280] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2944.582393] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2945.080371] BMS: adjust_soc: ibat_ua = -408932, vbat_uv = 3864573, ocv_est_uv = 3787694, pc_est = 42, soc_est = 37, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2945.095037] New_cal_SOC = 44, SOC = 44, batt_temp = 296, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 191131, iavg_ua = -396360
[ 2946.082098] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2946.082246] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2946.082302] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2946.082426] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2947.582073] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2947.582211] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2947.582266] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2947.582386] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2949.082120] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2949.082250] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2949.082304] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2949.082419] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2949.205215] qpnp_chg_charge_en: charging enabled
[ 2950.582077] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2950.582219] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2950.582276] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2950.582399] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2952.082097] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2952.082228] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2952.082282] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2952.082399] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2953.582124] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2953.582272] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2953.582328] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2953.582452] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2955.082126] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2955.082270] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2955.082326] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2955.082446] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2956.582064] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2956.582218] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2956.582274] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2956.582443] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2958.082100] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2958.082249] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2958.082306] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2958.082428] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2959.245129] qpnp_chg_charge_en: charging enabled
[ 2959.582072] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2959.582207] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2959.582264] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2959.582382] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2961.082116] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2961.082278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2961.082335] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2961.082464] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2962.582073] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2962.582219] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2962.582274] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2962.582397] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2964.082096] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2964.082243] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2964.082298] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2964.082417] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2965.081603] BMS: adjust_soc: ibat_ua = -402723, vbat_uv = 3865161, ocv_est_uv = 3789450, pc_est = 43, soc_est = 38, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2965.095648] New_cal_SOC = 44, SOC = 44, batt_temp = 296, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 188881, iavg_ua = -405000
[ 2965.582064] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2965.582208] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2965.582264] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2965.582388] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2967.082116] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2967.082245] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2967.082299] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2967.082413] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2968.582083] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2968.582245] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2968.582302] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2968.582428] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2969.285209] qpnp_chg_charge_en: charging enabled
[ 2970.081964] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2970.082022] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2970.082038] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2970.082077] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2970.098229] LGE charging scenario : state 0 -> 0(0-0), temp=298, volt=3843, BTM=0, charger=1, cur_set=1500/1500
[ 2970.158442] healthd: bms: Unknown power supply type
[ 2971.581091] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2971.581259] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2971.581316] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2971.581447] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2973.082113] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2973.082274] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2973.082332] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2973.082461] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2974.582089] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2974.582238] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2974.582294] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2974.582416] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2976.082177] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2976.082345] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2976.082402] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2976.082533] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2977.582021] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2977.582157] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2977.582211] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2977.582326] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2979.082162] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2979.082314] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2979.082371] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2979.082495] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2979.325182] qpnp_chg_charge_en: charging enabled
[ 2980.582098] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2980.582242] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2980.582298] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2980.582420] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2982.082097] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2982.082229] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2982.082284] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2982.082399] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2983.582098] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2983.582239] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2983.582295] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2983.582414] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2985.080361] BMS: adjust_soc: ibat_ua = -412636, vbat_uv = 3867516, ocv_est_uv = 3789941, pc_est = 43, soc_est = 38, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 2985.081999] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2985.082129] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2985.082183] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2985.082300] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2985.095036] New_cal_SOC = 44, SOC = 44, batt_temp = 296, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 186667, iavg_ua = -398520
[ 2986.582109] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2986.582272] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2986.582331] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2986.582461] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2988.082085] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2988.082219] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2988.082275] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2988.082392] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2989.365148] qpnp_chg_charge_en: charging enabled
[ 2989.582103] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2989.582242] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2989.582297] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2989.582421] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2991.082098] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2991.082242] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2991.082297] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2991.082419] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2992.582108] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2992.582264] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2992.582320] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2992.582446] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2994.082112] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2994.082269] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2994.082328] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2994.082456] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2995.582090] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2995.582234] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2995.582289] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2995.582410] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2997.082091] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2997.082245] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2997.082301] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2997.082428] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2998.582092] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 2998.582231] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 2998.582286] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 2998.582403] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 2999.405071] qpnp_chg_charge_en: charging enabled
[ 2999.785364] wlan: [13685:E :HDD] hdd_conf_arp_offload: 
[ 2999.785364] 
[ 3000.082106] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3000.082392] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3000.082450] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3000.082579] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3000.666455] wlan: [13685:E :HDD] hdd_conf_arp_offload: 
[ 3000.666455] 
[ 3001.582104] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3001.582251] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3001.582307] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3001.582433] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3003.082121] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3003.082274] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3003.082331] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3003.082458] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3004.582096] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3004.582231] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3004.582287] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3004.582406] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3005.080395] BMS: adjust_soc: ibat_ua = -397821, vbat_uv = 3867813, ocv_est_uv = 3793023, pc_est = 44, soc_est = 39, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 3005.095106] New_cal_SOC = 44, SOC = 44, batt_temp = 296, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 184440, iavg_ua = -400860
[ 3006.082051] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3006.082196] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3006.082252] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3006.082373] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3007.582123] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3007.582277] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3007.582335] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3007.582460] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3009.082102] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3009.082238] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3009.082293] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3009.082408] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3009.445605] qpnp_chg_charge_en: charging enabled
[ 3010.585228] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3010.585373] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3010.585429] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3010.585554] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3012.092076] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3012.092220] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3012.092276] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3012.092397] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3013.592090] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3013.592226] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3013.592282] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3013.592399] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3015.092092] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3015.092240] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3015.092296] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3015.092419] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3016.592055] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3016.592191] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3016.592246] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3016.592364] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3018.092072] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3018.092200] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3018.092255] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3018.092368] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3019.485561] qpnp_chg_charge_en: charging enabled
[ 3019.592088] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3019.592227] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3019.592284] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3019.592402] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3021.092096] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3021.092232] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3021.092286] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3021.092401] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3022.592083] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3022.592223] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3022.592278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3022.592396] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3024.092077] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3024.092207] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3024.092261] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3024.092374] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3025.095697] BMS: adjust_soc: ibat_ua = -400108, vbat_uv = 3869286, ocv_est_uv = 3794066, pc_est = 44, soc_est = 39, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 188, slope = 0
[ 3025.109807] New_cal_SOC = 44, SOC = 44, batt_temp = 296, rbatt = 188, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 182176, iavg_ua = -407520
[ 3025.592119] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3025.592265] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3025.592322] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3025.592448] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3027.092085] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3027.092219] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3027.092273] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3027.092389] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3028.592095] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3028.592234] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3028.592290] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3028.592409] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3029.525166] qpnp_chg_charge_en: charging enabled
[ 3030.092057] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3030.092224] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3030.092281] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3030.092410] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3030.259022] LGE charging scenario : state 0 -> 0(0-0), temp=297, volt=3866, BTM=0, charger=1, cur_set=1500/1500
[ 3030.329173] healthd: bms: Unknown power supply type
[ 3031.592086] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3031.592259] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3031.592317] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3031.592450] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3033.092070] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3033.092217] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3033.092272] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3033.092395] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3034.592096] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3034.592244] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3034.592300] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3034.592424] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3036.092056] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3036.092202] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3036.092258] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3036.092380] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3037.592127] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3037.592287] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3037.592346] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3037.592473] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3039.092123] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3039.092258] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3039.092313] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3039.092430] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3039.565571] qpnp_chg_charge_en: charging enabled
[ 3040.592084] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3040.592247] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3040.592304] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3040.592434] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3042.092085] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3042.092218] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3042.092272] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3042.092389] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3043.592089] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3043.592229] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3043.592284] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3043.592401] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3045.075819] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 3045.075860] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 3045.080539] BMS: adjust_soc: ibat_ua = -412527, vbat_uv = 3871935, ocv_est_uv = 3795205, pc_est = 44, soc_est = 39, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 186, slope = 0
[ 3045.092035] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3045.092174] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3045.092230] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3045.092349] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3045.123449] New_cal_SOC = 44, SOC = 44, batt_temp = 297, rbatt = 186, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 179916, iavg_ua = -406800
[ 3045.188691] healthd: bms: Unknown power supply type
[ 3045.253813] healthd: bms: Unknown power supply type
[ 3046.592128] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3046.592278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3046.592335] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3046.592459] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3048.092113] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3048.092267] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3048.092324] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3048.092447] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3049.592097] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3049.592252] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3049.592309] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3049.592433] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3049.605069] qpnp_chg_charge_en: charging enabled
[ 3051.092104] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3051.092247] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3051.092302] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3051.092424] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3052.592096] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3052.592232] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3052.592288] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3052.592404] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3054.092081] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3054.092225] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3054.092281] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3054.092403] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3055.592134] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3055.592294] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3055.592350] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3055.592475] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3057.092051] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3057.092188] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3057.092242] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3057.092357] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3058.592105] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3058.592253] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3058.592310] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3058.592432] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3059.645145] qpnp_chg_charge_en: charging enabled
[ 3060.092087] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3060.092242] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3060.092298] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3060.092425] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3061.592117] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3061.592263] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3061.592319] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3061.592439] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3063.092086] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3063.092222] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3063.092277] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3063.092394] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3064.592099] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3064.592235] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3064.592291] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3064.592407] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3065.080364] BMS: adjust_soc: ibat_ua = -410675, vbat_uv = 3873408, ocv_est_uv = 3797023, pc_est = 45, soc_est = 40, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 186, slope = 0
[ 3065.095100] New_cal_SOC = 44, SOC = 44, batt_temp = 297, rbatt = 186, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 177654, iavg_ua = -407160
[ 3066.092113] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3066.092276] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3066.092333] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3066.092460] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3067.592087] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3067.592225] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3067.592279] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3067.592398] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3069.092086] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3069.092220] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3069.092274] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3069.092391] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3069.685180] qpnp_chg_charge_en: charging enabled
[ 3070.592103] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3070.592247] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3070.592304] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3070.592428] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3072.093121] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3072.093270] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3072.093326] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3072.093450] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3073.592103] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3073.592261] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3073.592319] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3073.592450] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3075.092118] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3075.092259] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3075.092315] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3075.092436] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3076.592076] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3076.592216] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3076.592272] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3076.592387] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3078.092120] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3078.092265] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3078.092321] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3078.092443] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3079.592069] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3079.592207] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3079.592263] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3079.592380] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3079.725246] qpnp_chg_charge_en: charging enabled
[ 3081.092119] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3081.092279] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3081.092337] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3081.092466] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3082.592067] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3082.592207] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3082.592262] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3082.592381] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3084.092112] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3084.092262] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3084.092319] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3084.092444] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3085.080843] BMS: adjust_soc: ibat_ua = -399455, vbat_uv = 3872820, ocv_est_uv = 3798522, pc_est = 45, soc_est = 40, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 186, slope = 0
[ 3085.095680] New_cal_SOC = 44, SOC = 44, batt_temp = 297, rbatt = 186, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 175393, iavg_ua = -406980
[ 3085.592109] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3085.592248] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3085.592305] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3085.592425] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3087.092083] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3087.092224] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3087.092278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3087.092397] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3088.592093] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3088.592231] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3088.592286] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3088.592403] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3089.765161] qpnp_chg_charge_en: charging enabled
[ 3090.092071] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3090.092226] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3090.092283] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3090.092409] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3090.418869] LGE charging scenario : state 0 -> 0(0-0), temp=298, volt=3870, BTM=0, charger=1, cur_set=1500/1500
[ 3090.488716] healthd: bms: Unknown power supply type
[ 3090.492223] [LP5521] [store_led_blink] rgb=0x000000, on=0, off=0
[ 2790.598883] [LP5521] [lp5521_run_led_pattern] PATTERN_PLAY_OFF
[ 3090.517530] [LP5521] [lp5521_run_led_pattern] PATTERN_PLAY_OFF<2>[ 3091.590914] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3091.590975] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3091.590991] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3091.591032] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3093.092615] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3093.092769] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3093.092822] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3093.092945] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3094.592107] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3094.592250] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3094.592305] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3094.592423] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3096.092037] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3096.092198] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3096.092252] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3096.092380] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3097.592162] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3097.592312] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3097.592365] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3097.592485] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3099.092130] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3099.092284] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3099.092339] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3099.092462] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3099.805059] qpnp_chg_charge_en: charging enabled
[ 3100.592109] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3100.592251] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3100.592304] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3100.592426] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3102.092093] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3102.092230] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3102.092282] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3102.092397] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3103.592077] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3103.592225] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3103.592278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3103.592398] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3105.080340] BMS: adjust_soc: ibat_ua = -405119, vbat_uv = 3874881, ocv_est_uv = 3799529, pc_est = 45, soc_est = 40, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 186, slope = 0
[ 3105.092038] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3105.092170] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3105.092222] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3105.092338] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3105.095048] New_cal_SOC = 44, SOC = 44, batt_temp = 298, rbatt = 186, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 173218, iavg_ua = -391500
[ 3106.592557] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3106.592717] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3106.592771] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3106.592893] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3108.092046] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3108.092184] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3108.092235] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3108.092350] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3109.592046] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3109.592189] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3109.592241] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3109.592360] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3109.845172] qpnp_chg_charge_en: charging enabled
[ 3111.092105] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3111.092253] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3111.092307] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3111.092429] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3112.592087] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3112.592226] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3112.592278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3112.592396] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3114.092100] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3114.092245] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3114.092299] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3114.092421] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3115.592136] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3115.592282] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3115.592335] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3115.592453] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3117.092077] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3117.092207] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3117.092259] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3117.092372] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3118.592119] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3118.592276] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3118.592328] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3118.592452] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3119.885557] qpnp_chg_charge_en: charging enabled
[ 3120.092082] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3120.092228] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3120.092283] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3120.092404] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3121.592081] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3121.592216] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3121.592268] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3121.592382] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3123.092063] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3123.092195] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3123.092246] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3123.092359] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3124.592078] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3124.592238] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3124.592293] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3124.592420] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3125.080364] BMS: adjust_soc: ibat_ua = -414379, vbat_uv = 3876354, ocv_est_uv = 3799280, pc_est = 45, soc_est = 40, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 186, slope = 0
[ 3125.095088] New_cal_SOC = 44, SOC = 44, batt_temp = 298, rbatt = 186, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 170972, iavg_ua = -404280
[ 3126.092056] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3126.092198] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3126.092250] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3126.092371] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3127.593126] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3127.593272] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3127.593324] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3127.593439] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3129.092072] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3129.092224] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3129.092278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3129.092405] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3129.925180] qpnp_chg_charge_en: charging enabled
[ 3130.592083] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3130.592226] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3130.592278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3130.592398] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3132.092074] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3132.092205] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3132.092257] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3132.092372] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3133.592090] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3133.592237] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3133.592290] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3133.592410] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3135.092044] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3135.092183] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3135.092235] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3135.092352] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3136.592070] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3136.592201] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3136.592254] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3136.592368] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3138.092083] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3138.092232] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3138.092284] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3138.092407] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3139.590916] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3139.590972] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3139.590987] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3139.591025] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3139.965253] qpnp_chg_charge_en: charging enabled
[ 3141.092082] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3141.092226] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3141.092278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3141.092400] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3142.592110] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3142.592246] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3142.592297] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3142.592414] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3144.092083] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3144.092213] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3144.092264] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3144.092377] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3145.080403] BMS: adjust_soc: ibat_ua = -409368, vbat_uv = 3876648, ocv_est_uv = 3800506, pc_est = 46, soc_est = 41, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 186, slope = 0
[ 3145.095594] New_cal_SOC = 44, SOC = 44, batt_temp = 299, rbatt = 186, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 168738, iavg_ua = -402120
[ 3145.592084] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3145.592217] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3145.592269] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3145.592383] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3147.092062] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3147.092190] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3147.092241] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3147.092354] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3147.585338] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3148.591103] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3148.591266] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3148.591320] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3148.591449] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3150.005195] qpnp_chg_charge_en: charging enabled
[ 3150.093102] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3150.093255] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3150.093309] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3150.093436] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3150.578829] LGE charging scenario : state 0 -> 0(0-0), temp=299, volt=3858, BTM=0, charger=1, cur_set=1500/1500
[ 3150.648701] healthd: bms: Unknown power supply type
[ 3151.593106] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3151.593248] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3151.593300] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3151.593421] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3153.092100] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3153.092232] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3153.092283] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3153.092395] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3154.592125] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3154.592274] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3154.592328] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3154.592448] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3156.092041] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3156.092171] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3156.092223] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3156.092335] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3157.592136] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3157.592278] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3157.592332] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3157.592452] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3158.388250] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3159.092152] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3159.092303] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3159.092356] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3159.092477] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3160.045113] qpnp_chg_charge_en: charging enabled
[ 3160.592119] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3160.592261] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3160.592312] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3160.592428] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3162.092061] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3162.092187] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3162.092238] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3162.092348] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3163.592111] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3163.592244] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3163.592296] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3163.592407] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3165.080440] BMS: adjust_soc: ibat_ua = -411220, vbat_uv = 3878415, ocv_est_uv = 3801929, pc_est = 46, soc_est = 41, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 186, slope = 0
[ 3165.090490] New_cal_SOC = 45, SOC = 45, batt_temp = 299, rbatt = 186, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 166683, iavg_ua = -369900
[ 3165.090559] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 3165.090589] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 3165.092038] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3165.092175] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3165.092228] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3165.092350] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3165.208170] healthd: bms: Unknown power supply type
[ 3165.266508] healthd: bms: Unknown power supply type
[ 3166.592127] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3166.592270] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3166.592324] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3166.592446] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3168.092101] wlan: [13672:F :CTL] WDI Process Enter BMPS RSP failed With HAL Status Code: 1
[ 3168.092230] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 268: pmmBmps: BMPS_INIT_PWR_SAVE_REQ failed, informing SME
[ 3168.092281] wlan: [13672:E :PMC] pmmInitBmpsResponseHandler: 285: Unexpected heartbeat timer not running
[ 3168.092394] wlan: [13672:E :PMC] pmcProcessResponse: 1386: Response message to request to enter BMPS indicates failure, status 234
[ 3169.503993] wlan: [13672:E :SME] sme_QosPmcDeviceStateUpdateInd: 7330: nothing to process in PMC state 6
[ 3169.504015] wlan: [13672:E :TL ]  ----> CRegion 0, hRSSI -45, Alpha 5
[ 3169.505932] wlan: [13672:E :PE ] limProcessDeauthFrame: 134: received Deauth frame (mlm state = eLIM_MLM_LINK_ESTABLISHED_STATE) with reason code 6 from 
[ 3169.505952] wlan: [13672:E :PE ] limPrintMacAddr: 1276: 4:A1:51:AC:F8:60
[ 3169.506014] wlan: [13672:E :SME] csrNeighborRoamIndicateDisconnect: 3845: Disconnect indication on session 0 in state 2 from BSSID : 04:a1:51:ac:f8:60
[ 3169.512732] wlan: [13672:E :PE ] limProcessDeauthFrame: 82: received Deauth frame in DEAUTH_WT_STATE(already processing previously received DEAUTH frame)..Dropping this.. Deauth Failed 1 
[ 3169.512732]  
[ 3169.513007] wlan: disconnected
[ 3169.513023] wlan(0) 00:00:00:00:00:00 Standalone
[ 3169.513266] wlan: [13672:E :PE ] limDeactivateAndChangeTimer: 1438: Deactivated probe after hb timer
[ 3169.603837] send sigkill to 20503 (zonewalker.acar), adj 1000, size 7697
[ 3169.682096] send sigkill to 13899 (d.process.acore), adj 1000, size 7676
[ 3170.043455] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3170.043716] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]<3>[ 3170.085020] qpnp_chg_charge_en: charging enabled
[ 3170.043816] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3170.115515] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585][rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3170.116052] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585][rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3170.116331] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]<4>[ 3170.174712] HTB: quantum of class 10001 is big. Consider r2q change.
[ 3170.212330] HTB: quantum of class 10010 is big. Consider r2q change.
[ 3171.751613] send sigkill to 20749 (android.youtube), adj 1000, size 15089
[ 3171.905598] audit_printk_skb_without_drop: 10 callbacks suppressed
[ 3171.905617] type=1400 audit(1486405640.872:11211): avc:  denied  { search } for  pid=21203 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.905741] type=1400 audit(1486405640.872:11212): avc:  denied  { search } for  pid=21203 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.906317] type=1400 audit(1486405640.872:11211): avc: denied { search } for pid=21203 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.916671] type=1400 audit(1486405640.872:11212): avc: denied { search } for pid=21203 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.917337] type=1400 audit(1486405640.882:11213): avc:  denied  { search } for  pid=21224 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.917515] type=1400 audit(1486405640.882:11214): avc:  denied  { search } for  pid=21224 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.917879] type=1400 audit(1486405640.882:11213): avc: denied { search } for pid=21224 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.918433] type=1400 audit(1486405640.882:11214): avc: denied { search } for pid=21224 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.919084] type=1400 audit(1486405640.882:11215): avc:  denied  { search } for  pid=21224 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.919566] type=1400 audit(1486405640.882:11216): avc:  denied  { search } for  pid=21203 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.919753] type=1400 audit(1486405640.882:11217): avc:  denied  { search } for  pid=21203 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.920570] type=1400 audit(1486405640.882:11215): avc: denied { search } for pid=21224 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.920852] type=1400 audit(1486405640.882:11216): avc: denied { search } for pid=21203 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.921137] type=1400 audit(1486405640.882:11217): avc: denied { search } for pid=21203 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.922294] type=1400 audit(1486405640.882:11218): avc:  denied  { search } for  pid=21225 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.922366] type=1400 audit(1486405640.882:11218): avc: denied { search } for pid=21225 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.922413] type=1400 audit(1486405640.882:11219): avc:  denied  { search } for  pid=21225 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.922562] type=1400 audit(1486405640.882:11220): avc:  denied  { search } for  pid=21225 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.923396] type=1400 audit(1486405640.882:11219): avc: denied { search } for pid=21225 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3171.923539] type=1400 audit(1486405640.882:11220): avc: denied { search } for pid=21225 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3172.027069] send sigkill to 20871 (id.gms.unstable), adj 1000, size 11395
[ 3172.373565] send sigkill to 20985 (ogle.android.gm), adj 1000, size 14111
[ 3173.524479] send sigkill to 21238 (enmod.lockclock), adj 1000, size 6409
[ 3174.192244] send sigkill to 21270 (id.gms.unstable), adj 1000, size 13637
[ 3175.581476] send sigkill to 21350 (enmod.lockclock), adj 1000, size 6859
[ 3175.674502] send sigkill to 21203 (ogenmod.updater), adj 1000, size 6343
[ 3176.017724] send sigkill to 21253 (oid.apps.photos), adj 1000, size 10076
[ 3176.313547] send sigkill to 21108 (k.mobilebanking), adj 1000, size 11913
[ 3177.574156] send sigkill to 21297 (stagram.android), adj 1000, size 9778
[ 3179.135086] rmnet0: no IPv6 routers present
[ 3180.125054] qpnp_chg_charge_en: charging enabled
[ 3185.075957] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 3185.076006] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 3185.080674] BMS: adjust_soc: ibat_ua = -405664, vbat_uv = 3879003, ocv_est_uv = 3804361, pc_est = 47, soc_est = 43, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3185.134568] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 165240, iavg_ua = -259740
[ 3185.199613] healthd: bms: Unknown power supply type
[ 3185.266897] healthd: bms: Unknown power supply type
[ 3190.165150] qpnp_chg_charge_en: charging enabled
[ 3200.205055] qpnp_chg_charge_en: charging enabled
[ 3205.080517] BMS: adjust_soc: ibat_ua = -339542, vbat_uv = 3868401, ocv_est_uv = 3805926, pc_est = 47, soc_est = 43, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3205.094585] New_cal_SOC = 45, SOC = 45, batt_temp = 302, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 163144, iavg_ua = -377280
[ 3210.245129] qpnp_chg_charge_en: charging enabled
[ 3210.738785] LGE charging scenario : state 0 -> 0(0-0), temp=302, volt=3865, BTM=0, charger=1, cur_set=1500/1500
[ 3210.809084] healthd: bms: Unknown power supply type
[ 3220.285130] qpnp_chg_charge_en: charging enabled
[ 3224.957931] send sigkill to 21423 (com.Slack), adj 1000, size 12116
[ 3225.079343] BMS: adjust_soc: ibat_ua = -71023, vbat_uv = 3824220, ocv_est_uv = 3811152, pc_est = 48, soc_est = 44, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3225.093739] New_cal_SOC = 45, SOC = 45, batt_temp = 305, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 161016, iavg_ua = -383040
[ 3225.270744] send sigkill to 18338 (.urbandroid.lux), adj 1000, size 6314
[ 3230.325052] qpnp_chg_charge_en: charging enabled
[ 3240.365244] qpnp_chg_charge_en: charging enabled
[ 3245.080505] BMS: adjust_soc: ibat_ua = -449019, vbat_uv = 3888135, ocv_est_uv = 3805516, pc_est = 47, soc_est = 43, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3245.094584] New_cal_SOC = 45, SOC = 45, batt_temp = 301, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 158745, iavg_ua = -408780
[ 3250.405061] qpnp_chg_charge_en: charging enabled
[ 3260.445562] qpnp_chg_charge_en: charging enabled
[ 3265.080531] BMS: adjust_soc: ibat_ua = -435947, vbat_uv = 3888429, ocv_est_uv = 3808215, pc_est = 47, soc_est = 43, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3265.094594] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 156305, iavg_ua = -439200
[ 3270.485553] qpnp_chg_charge_en: charging enabled
[ 3270.898861] LGE charging scenario : state 0 -> 0(0-0), temp=300, volt=3886, BTM=0, charger=1, cur_set=1500/1500
[ 3270.968702] healthd: bms: Unknown power supply type
[ 3280.525189] qpnp_chg_charge_en: charging enabled
[ 3285.080560] BMS: adjust_soc: ibat_ua = -446514, vbat_uv = 3891081, ocv_est_uv = 3808923, pc_est = 47, soc_est = 43, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3285.094596] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 153840, iavg_ua = -443700
[ 3290.565054] qpnp_chg_charge_en: charging enabled
[ 3300.605246] qpnp_chg_charge_en: charging enabled
[ 3305.080465] BMS: adjust_soc: ibat_ua = -450217, vbat_uv = 3892257, ocv_est_uv = 3809418, pc_est = 48, soc_est = 44, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3305.095168] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 151375, iavg_ua = -443700
[ 3310.645180] qpnp_chg_charge_en: charging enabled
[ 3320.685220] qpnp_chg_charge_en: charging enabled
[ 3325.080387] BMS: adjust_soc: ibat_ua = -450108, vbat_uv = 3893730, ocv_est_uv = 3810911, pc_est = 48, soc_est = 44, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3325.094494] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 148902, iavg_ua = -445140
[ 3330.725247] qpnp_chg_charge_en: charging enabled
[ 3331.059293] LGE charging scenario : state 0 -> 0(0-0), temp=300, volt=3889, BTM=0, charger=1, cur_set=1500/1500
[ 3331.129151] healthd: bms: Unknown power supply type
[ 3331.132710] [LP5521] [store_led_blink] rgb=0x000000, on=0, off=0
[ 3170.116512] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3331.157317] [LP5521] [lp5521_run_led_pattern] PATTERN_PLAY_OFF<3>[ 3340.765241] qpnp_chg_charge_en: charging enabled
[ 3345.084177] BMS: adjust_soc: ibat_ua = -442701, vbat_uv = 3894024, ocv_est_uv = 3812568, pc_est = 48, soc_est = 44, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3345.098266] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 146426, iavg_ua = -445680
[ 3350.805655] qpnp_chg_charge_en: charging enabled
[ 3360.013420] send sigkill to 21489 (oid.apps.photos), adj 1000, size 11634
[ 3360.581320] wlan: [13672:E :PE ] wlan_cfgGetInt: 348: Not valid cfg id 1
[ 3360.597560] wlan: connected to 04:a1:51:ac:f8:60
[ 3360.598591] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3360.597609] wlan(6) 04:a1:51:ac:f8:60 Standalone
[ 3360.605107] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3360.614158] wlan: [13685:E :SME] sme_FTUpdateKey: Unhandled state=0
[ 3360.615040] wlan: [13685:E :SME] sme_FTUpdateKey: Unhandled state=0
[ 3360.617231] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3360.617464] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585][rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3360.618963] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]<3>[ 3360.647561] wlan: [13685:E :HDD] hdd_conf_arp_offload: 
[ 3360.647561] 
[ 3360.737480] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3360.737788] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585][rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3360.738904] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]<3>[ 3360.743629] wlan: [13685:E :HDD] hdd_conf_arp_offload: 
[ 3360.743629] 
[ 3360.744147] wlan: [13685:E :HDD] hdd_conf_arp_offload: 
[ 3360.744147] 
[ 3360.754160] wlan: [13672:E :SME] sme_QosPmcDeviceStateUpdateInd: 7330: nothing to process in PMC state 6
[ 3360.754179] wlan: [13672:E :TL ]  ----> CRegion 0, hRSSI 0, Alpha 5
[ 3360.845166] qpnp_chg_charge_en: charging enabled
[ 3361.528530] send sigkill to 21392 (id.gms.unstable), adj 1000, size 10817
[ 3361.566150] wlan: [13672:E :PE ] limProcessAddBaInd: 5620: BA setup for staId = 3, TID: 0, SSN: 11
[ 3361.568301] wlan: [13672:E :PE ] __limProcessAddBARsp: 1447: ADDBA Rsp from STA with AID 1, tid = 0, status = 0
[ 3361.646058] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3361.646415] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585][rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
[ 3361.648937] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]<5>[ 3361.782551] type=1400 audit(1486405830.742:11221): avc:  denied  { search } for  pid=21798 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.782641] type=1400 audit(1486405830.742:11221): avc: denied { search } for pid=21798 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.782696] type=1400 audit(1486405830.742:11222): avc:  denied  { search } for  pid=21798 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.783231] type=1400 audit(1486405830.742:11222): avc: denied { search } for pid=21798 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.784566] type=1400 audit(1486405830.742:11223): avc:  denied  { search } for  pid=21815 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.784641] type=1400 audit(1486405830.742:11223): avc: denied { search } for pid=21815 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.785223] type=1400 audit(1486405830.752:11224): avc:  denied  { search } for  pid=21815 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.785570] type=1400 audit(1486405830.752:11224): avc: denied { search } for pid=21815 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.786500] type=1400 audit(1486405830.752:11225): avc:  denied  { search } for  pid=21815 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.786898] type=1400 audit(1486405830.752:11226): avc:  denied  { search } for  pid=21798 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.787062] type=1400 audit(1486405830.752:11227): avc:  denied  { search } for  pid=21798 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.787234] type=1400 audit(1486405830.752:11225): avc: denied { search } for pid=21815 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.788079] type=1400 audit(1486405830.752:11228): avc:  denied  { search } for  pid=21816 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.788216] type=1400 audit(1486405830.752:11229): avc:  denied  { search } for  pid=21816 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.788352] type=1400 audit(1486405830.752:11230): avc:  denied  { search } for  pid=21816 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.791996] type=1400 audit(1486405830.752:11226): avc: denied { search } for pid=21798 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.792247] type=1400 audit(1486405830.752:11227): avc: denied { search } for pid=21798 comm="re-initialized>" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.792385] type=1400 audit(1486405830.752:11228): avc: denied { search } for pid=21816 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.792761] type=1400 audit(1486405830.752:11229): avc: denied { search } for pid=21816 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3361.793098] type=1400 audit(1486405830.752:11230): avc: denied { search } for pid=21816 comm="XSharedPreferen" name="com.pyler.xinternalsd" dev="mmcblk0p34" ino=6026 scontext=u:r:system_app:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=0
[ 3363.625419] send sigkill to 21370 (le.android.talk), adj 1000, size 13708
[ 3365.081341] BMS: adjust_soc: ibat_ua = -305337, vbat_uv = 3867222, ocv_est_uv = 3811040, pc_est = 48, soc_est = 44, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3365.094922] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 144420, iavg_ua = -361080
[ 3370.665006] wlan0: no IPv6 routers present
[ 3370.885519] qpnp_chg_charge_en: charging enabled
[ 3375.822995] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3380.925340] qpnp_chg_charge_en: charging enabled
[ 3385.080459] BMS: adjust_soc: ibat_ua = -446405, vbat_uv = 3894615, ocv_est_uv = 3812477, pc_est = 48, soc_est = 44, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3385.094572] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 142290, iavg_ua = -383400
[ 3390.965058] qpnp_chg_charge_en: charging enabled
[ 3391.219161] LGE charging scenario : state 0 -> 0(0-0), temp=300, volt=3891, BTM=0, charger=1, cur_set=1500/1500
[ 3391.289235] healthd: bms: Unknown power supply type
[ 3391.884430] send sigkill to 21639 (e.process.gapps), adj 1000, size 7059
[ 3393.845283] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3401.005241] qpnp_chg_charge_en: charging enabled
[ 3404.699319] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3405.095955] BMS: adjust_soc: ibat_ua = -440196, vbat_uv = 3895203, ocv_est_uv = 3814207, pc_est = 49, soc_est = 45, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3405.110548] New_cal_SOC = 45, SOC = 45, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 140055, iavg_ua = -402300
[ 3411.045058] qpnp_chg_charge_en: charging enabled
[ 3415.963488] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3421.085154] qpnp_chg_charge_en: charging enabled
[ 3425.080579] BMS: adjust_soc: ibat_ua = -352832, vbat_uv = 3881067, ocv_est_uv = 3816146, pc_est = 49, soc_est = 45, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3425.089926] New_cal_SOC = 46, SOC = 46, batt_temp = 301, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 137770, iavg_ua = -411300
[ 3425.089995] qpnp_batt_external_power_changed: [LGE] usb_online: 1 ac_online: 0
[ 3425.090024] qpnp_batt_external_power_changed: [LGE] power_supply_type = 4
[ 3425.195918] healthd: bms: Unknown power supply type
[ 3425.254716] healthd: bms: Unknown power supply type
[ 3426.817902] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3431.125186] qpnp_chg_charge_en: charging enabled
[ 3441.165225] qpnp_chg_charge_en: charging enabled
[ 3445.080408] BMS: adjust_soc: ibat_ua = -443899, vbat_uv = 3896676, ocv_est_uv = 3814999, pc_est = 49, soc_est = 45, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3445.094527] New_cal_SOC = 46, SOC = 46, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 135373, iavg_ua = -431460
[ 3451.205169] qpnp_chg_charge_en: charging enabled
[ 3451.379261] LGE charging scenario : state 0 -> 0(0-0), temp=300, volt=3894, BTM=0, charger=1, cur_set=1500/1500
[ 3451.448693] healthd: bms: Unknown power supply type
[ 3461.245207] qpnp_chg_charge_en: charging enabled
[ 3465.080456] BMS: adjust_soc: ibat_ua = -446949, vbat_uv = 3898149, ocv_est_uv = 3815911, pc_est = 49, soc_est = 45, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3465.094566] New_cal_SOC = 46, SOC = 46, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 132930, iavg_ua = -439740
[ 3471.285172] qpnp_chg_charge_en: charging enabled
[ 3481.325139] qpnp_chg_charge_en: charging enabled
[ 3484.572129] wlan: [13672:E :PE ] limProcessAddBaInd: 5620: BA setup for staId = 3, TID: 0, SSN: 108
[ 3484.574622] wlan: [13672:E :PE ] __limProcessAddBARsp: 1447: ADDBA Rsp from STA with AID 1, tid = 0, status = 0
[ 3485.080599] BMS: adjust_soc: ibat_ua = -410675, vbat_uv = 3894321, ocv_est_uv = 3818757, pc_est = 50, soc_est = 46, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3485.094584] New_cal_SOC = 46, SOC = 46, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 130499, iavg_ua = -437580
[ 3491.365205] qpnp_chg_charge_en: charging enabled
[ 3501.405334] qpnp_chg_charge_en: charging enabled
[ 3505.080640] BMS: adjust_soc: ibat_ua = -449455, vbat_uv = 3901095, ocv_est_uv = 3818396, pc_est = 50, soc_est = 46, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3505.094677] New_cal_SOC = 46, SOC = 46, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 128086, iavg_ua = -434340
[ 3507.919003] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3511.445210] qpnp_chg_charge_en: charging enabled
[ 3511.539252] LGE charging scenario : state 0 -> 0(0-0), temp=300, volt=3897, BTM=0, charger=1, cur_set=1500/1500
[ 3511.613969] healthd: bms: Unknown power supply type
[ 3517.954583] wlan: [13672:E :CTL] Operation 2147483647 is not yet implemented 
[ 3521.485243] qpnp_chg_charge_en: charging enabled
[ 3525.087020] BMS: adjust_soc: ibat_ua = -440196, vbat_uv = 3901095, ocv_est_uv = 3820099, pc_est = 50, soc_est = 46, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3839140, pc_new = 0, pc = 0, soc_new = 0, rbatt = 184, slope = 0
[ 3525.101045] New_cal_SOC = 46, SOC = 46, batt_temp = 300, rbatt = 184, fcc_uah = 2986000, ocv_charge_uah = 1612440, uuc_uah = 209020, cc_uah = 125770, iavg_ua = -416880
[ 3531.525269] qpnp_chg_charge_en: charging enabled