smokindice
Lurker
i have two DHD and i was able to achieve S-OFF on one of them, however on second one this device has been giving me alot of trouble.
so i was following a guide on XDA how to achieve S-off without AAHK
C:\Users\Smoke\Desktop\Root Stuff\ace-tools>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: HT12PTZ00951
INFOimei: 35576104025****
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9814000
INFOcidnum: TELUS001
INFObattery-status: good
INFObattery-voltage: 4194mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.032s
"C:\Users\Smoke\Desktop\Root Stuff\ace-tools>fastboot flash zip firmware.zip
sending 'zip' (18223 KB)... OKAY [ 2.999s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOchecking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 15.412s"
Whats the connection between these two.
"C:\Users\Smoke\Desktop\Root Stuff\ace-tools>adb shell /tmp/gfree -f"
--secu_flag off set
--cid set. CID will be changed to: 11111111
--sim_unlock. SIMLOCK will be removed
Section header entry size: 40
Number of section headers: 44
Total section header table size: 1760
Section header file offset: 0x00015398 (86936)
Section index for section name string table: 41
String table offset: 0x000151df (86495)
Searching for .modinfo section...
- Section[16]: .modinfo
-- offset: 0x000011cc (4556)
-- size: 0x000000c4 (196)
Kernel release: 2.6.32.21
New .modinfo section size: 196
Attempting to power cycle eMMC... Failed.
Module failed to power cycle eMMC."
why is it not happening i get everything done but these two steps are the trouble. got my CID and does this affect aswell?
"C:\Users\Smoke\Desktop\Root Stuff\ace-tools>adb shell /data/local/tmp/misc_version
-s 1.11.111.1
--set_version set. VERSION will be changed to: 1.11.111.1
Misc partition is "/dev/block/mmcblk0p17"
Patching and backing up misc partition...
Error opening input file."
Need Help Fellas Kindly this one is giving issues. i already have bootloader unlocked and the rooted rom installed cwm is there too.... and when i enter >fastboot oem rebootRUU=====> it goes to screen with HTC logo but doesent show any other thing but the logo i think it suppose to show when the RUU is being updated
also i have the same bootloader on the OP pic but i dont have the same Radio.
My Radio is 26.14.04.28_M
any help is apreciated
thnx
i have been gettin those FAILED(remote: 43 main version check fail)
also when i type this command >fastboot oem lock
and cant get off s-off i need help please stuck with this issue for 3 days now..
eMMC seems fine here:
~ # dmesg | grep mmc0
dmesg | grep mmc0
<3>[ 8.423339] mmc0: No card detect facilities available
<6>[ 8.423889] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 98,0 dma 8
<6>[ 8.424072] mmc0: Platform slot type: MMC
<6>[ 8.424163] mmc0: 4 bit data mode disabled
<6>[ 8.424255] mmc0: 8 bit data mode enabled
<6>[ 8.424438] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
<6>[ 8.424530] mmc0: Slot eject status = 0
<6>[ 8.424621] mmc0: Power save feature enable = 1
<6>[ 8.424774] mmc0: DM non-cached buffer at ffa0d000, dma_addr 0x0bb17000
<6>[ 8.424896] mmc0: DM cmd busaddr 0x0bb17000, cmdptr busaddr 0x0bb17300
<6>[ 8.576660] mmc0: new high speed MMC card at address 0001
<6>[ 8.578277] mmcblk0: mmc0:0001 SEM04G 2.17 GiB
~ #
so i was following a guide on XDA how to achieve S-off without AAHK
C:\Users\Smoke\Desktop\Root Stuff\ace-tools>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: HT12PTZ00951
INFOimei: 35576104025****
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9814000
INFOcidnum: TELUS001
INFObattery-status: good
INFObattery-voltage: 4194mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.032s
"C:\Users\Smoke\Desktop\Root Stuff\ace-tools>fastboot flash zip firmware.zip
sending 'zip' (18223 KB)... OKAY [ 2.999s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOchecking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 15.412s"
Whats the connection between these two.
"C:\Users\Smoke\Desktop\Root Stuff\ace-tools>adb shell /tmp/gfree -f"
--secu_flag off set
--cid set. CID will be changed to: 11111111
--sim_unlock. SIMLOCK will be removed
Section header entry size: 40
Number of section headers: 44
Total section header table size: 1760
Section header file offset: 0x00015398 (86936)
Section index for section name string table: 41
String table offset: 0x000151df (86495)
Searching for .modinfo section...
- Section[16]: .modinfo
-- offset: 0x000011cc (4556)
-- size: 0x000000c4 (196)
Kernel release: 2.6.32.21
New .modinfo section size: 196
Attempting to power cycle eMMC... Failed.
Module failed to power cycle eMMC."
why is it not happening i get everything done but these two steps are the trouble. got my CID and does this affect aswell?
"C:\Users\Smoke\Desktop\Root Stuff\ace-tools>adb shell /data/local/tmp/misc_version
-s 1.11.111.1
--set_version set. VERSION will be changed to: 1.11.111.1
Misc partition is "/dev/block/mmcblk0p17"
Patching and backing up misc partition...
Error opening input file."
Need Help Fellas Kindly this one is giving issues. i already have bootloader unlocked and the rooted rom installed cwm is there too.... and when i enter >fastboot oem rebootRUU=====> it goes to screen with HTC logo but doesent show any other thing but the logo i think it suppose to show when the RUU is being updated
also i have the same bootloader on the OP pic but i dont have the same Radio.
My Radio is 26.14.04.28_M
any help is apreciated
thnx
i have been gettin those FAILED(remote: 43 main version check fail)
also when i type this command >fastboot oem lock
and cant get off s-off i need help please stuck with this issue for 3 days now..
eMMC seems fine here:
~ # dmesg | grep mmc0
dmesg | grep mmc0
<3>[ 8.423339] mmc0: No card detect facilities available
<6>[ 8.423889] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 98,0 dma 8
<6>[ 8.424072] mmc0: Platform slot type: MMC
<6>[ 8.424163] mmc0: 4 bit data mode disabled
<6>[ 8.424255] mmc0: 8 bit data mode enabled
<6>[ 8.424438] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
<6>[ 8.424530] mmc0: Slot eject status = 0
<6>[ 8.424621] mmc0: Power save feature enable = 1
<6>[ 8.424774] mmc0: DM non-cached buffer at ffa0d000, dma_addr 0x0bb17000
<6>[ 8.424896] mmc0: DM cmd busaddr 0x0bb17000, cmdptr busaddr 0x0bb17300
<6>[ 8.576660] mmc0: new high speed MMC card at address 0001
<6>[ 8.578277] mmcblk0: mmc0:0001 SEM04G 2.17 GiB
~ #