step 1:Make sure USB debugging is enabled
step 2:download usb drivers P020120216436387234095(1).exe - File Shared from Box
step 3
ownload and install qpst 2.7
step 4:Connect phone to computer
step 5:Open device manager expand ports and make note of what com port your USB device is on
step 6:Open up qpst configuration if com port is not shown select add port and enter com# (# being the one seen @ device manager)
step 7:Select service programming (phone must be selected to continue)
step 8:On the main menu setting tab click read from phone and will obtain phone info it will ask for ur spc
step 9:Spc code can be obtained through cdma workshop or by using ***************** Get Spc
step 10:Look for M.IP tab and there will be an option under Mobile IP Behavior to set it to Simple IP only select it and then click on active users and set it to 1 click write to phone your phone should reboot and i got 1.63.mbps down and 0.45.mbp up
step 2:download usb drivers P020120216436387234095(1).exe - File Shared from Box
step 3

step 4:Connect phone to computer
step 5:Open device manager expand ports and make note of what com port your USB device is on
step 6:Open up qpst configuration if com port is not shown select add port and enter com# (# being the one seen @ device manager)
step 7:Select service programming (phone must be selected to continue)
step 8:On the main menu setting tab click read from phone and will obtain phone info it will ask for ur spc
step 9:Spc code can be obtained through cdma workshop or by using ***************** Get Spc
step 10:Look for M.IP tab and there will be an option under Mobile IP Behavior to set it to Simple IP only select it and then click on active users and set it to 1 click write to phone your phone should reboot and i got 1.63.mbps down and 0.45.mbp up