• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Help Galaxy Portal Drivers issue

Z

zman786

Newbie
HI, I got the i5700 yesterday. I've been trying to update it to 2.1 but with no success. Initially i had port problems but i fixed that. Now it wont go past <1> setup connection. It hasnt been bricked (thankfully) but when i checked the drivers (while in that download mode) and they showed up as Samsung Modem, USB (or something similar) but had no mention of Android in the name.
When i connect the phone while its on, the drivers show up correctly (with Android in the name) (i hear this is necessary because it shows its connected to the OS)

So can anyone explain to me how I can install the drivers correctly for download mode?
 
Here is a checklist that might help.

Install nps version 1.4 or 1.5, or kies, to get latest drivers installed.

Download Odin

Remove sim & sd card

Put phone into download mode (press volume down, camera & power button) make sure phone is not connected to PCB to get phone into download mode.

Once phone displays download mode screen, connect via usb to pc.

Load Odin

Set .tar paths in Odin and wait 1-2 minutes (for drivers to finish installing phone)

You should now have a yellow com port. Now hit start to flash your phone.
 
After removing your sim and sd card, also remove and replace your battery, and keep your phone off, as the next step (putting phone into download mode) powers up your phone the right way.
 
ok so i tried all that and it didnt work, the drivers were still missing "Android" in their title, and it was stuck on the setup connection part.
Now heres a bigger problem, when i tried a different usb port in download mode it tried installing drivers again automatically but this time it just say Unknown Device and now it says that for all the Usb ports. However it works perfectly fine when the phone is working normally.
Really appreciate any help
 
Check what version of kies or nps you have installed

Make sure kies or nps is NOT running at the point when you connect your phone to pc.

Check the system trey icons for a kies or nps icon, if there is one, ITS STILL RUNNING and flashing will not work, Unload kies or nps here too. (right click and kill connection monitoring)
 
tried it with kies, this time only one driver gets installed (the usb component) and not the modem so odin wont recognise it (closed everything associated with kies)

So guess i'll just wait for the official update
 
Na you only need to wait a few minutes. Still sounds like something is running that shouldn't be.
 
You must log in or register to reply here.
Back
Top Bottom