paintman64
Lurker
My HTC One M7 is stuck in black screen with HTC In middle and four triangles with ! in them at four corners. It does not go into the recovery mode or anything. When I connect to laptop, it stays in the same screen, but if I disconnect the laptop cable, it goes into a screen showing:
****Tampered***
****Relocked****
M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4T.35.3218.16
OpenDSP-v35.120.274.0718
OS-6.10.531.10 (7.18.531.35)
e-MMC-boot 2048MB
Aug 19 2015, 03:47:53.0
RUU
RUU is highlighted in orange, but I cant get to move to it or click it or select it.
I downloaded twrp.img and when I give "fastboot flash recover twrp.img", i get the following:
Target reported max download size of 1514139648 bytes
sending "recovery" (9932KB)
okay [1.213 S]
writing 'recovery'
<bootloader> signature checking....
FAILED <remote : 12 signature verify fail>
Finished. total time : 2.254 s
Please help. I am at my wits end.
Thanks in advance
Paintman64
****Tampered***
****Relocked****
M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4T.35.3218.16
OpenDSP-v35.120.274.0718
OS-6.10.531.10 (7.18.531.35)
e-MMC-boot 2048MB
Aug 19 2015, 03:47:53.0
RUU
RUU is highlighted in orange, but I cant get to move to it or click it or select it.
I downloaded twrp.img and when I give "fastboot flash recover twrp.img", i get the following:
Target reported max download size of 1514139648 bytes
sending "recovery" (9932KB)
okay [1.213 S]
writing 'recovery'
<bootloader> signature checking....
FAILED <remote : 12 signature verify fail>
Finished. total time : 2.254 s
Please help. I am at my wits end.
Thanks in advance
Paintman64
). So if you see what looks like a successful hboot flash followed by that message, do what it says and repeat the "fastboot flash zip xxxx.zip" command. The second time it should take a lot longer, flash all the other partitions, and end with a lot of messages telling you it's succeeded. The progress bar on the phone screen should stop at ~90% - that's normal. The last bit is rebooting, but it stops rather than doing that automatically in case there are any errors during the flashing (to give you a chance to fix them). As long as there are no errors and the computer tells you it was successful you can then