Need assistance I've been using Tasker for 2 years now. Ive been using a Tasker profile that unlock my phone whenever I'm home(wifi).
Recently I purchase a new car & created a Tasker profile to unlock my phone whenever it recognize my car BT.
Work like a charm, but something I notice that when I get home my phone doesnt unlock like before.
And vice versa in the car, it does at first but my phone lock screen after a while.
My S5 is rooted and using lollipop 5.1.1 the profile I create in Tasker is using BT connected using secure settting, wait 2 secs, n system unlock when safe environment!sent.
As for wifi I used wifi connected with same principle with secure setting.
It as if my two profiles are conflicting with each other?
If anyone could guide on this, please...
Please take note I didn't create these profiles, found them on a YouTube tutorials.
Regards,
Profile: Lock Screen (25)
State: Wifi Connected [ SSID:Sal888 MAC:* IP:* ]
Enter: 101 Safe Place (16)
Run Both Together
A1: Secure Settings [ Configuration:Screen & Keyboard Lights On
5 Seconds Timeout (Seconds):0 ]
A2: Secure Settings [ Configuration:Clear Password Timeout (Seconds):0 ]
A3: Wait [ MS:0 Seconds:2 Minutes:0 Hours:0 Days:0 ]
A4: System Lock
Exit: 101 Unsafe Place (17)
A1: Secure Settings [ Configuration:Screen & Keyboard Lights On
5 Seconds Timeout (Seconds):0 ]
A2: Secure Settings [ Configuration:Set Pin Timeout (Seconds):0 ]
A3: Wait [ MS:0 Seconds:2 Minutes:0 Hours:0 Days:0 ]
A4: System Lock
Profile: Car Lock (31)
State: BT Connected [ Name:SUBARU BT Address:* ]
Enter: 101 Safe Place (16)
Run Both Together
A1: Secure Settings [ Configuration:Screen & Keyboard Lights On
5 Seconds Timeout (Seconds):0 ]
A2: Secure Settings [ Configuration:Clear Password Timeout (Seconds):0 ]
A3: Wait [ MS:0 Seconds:2 Minutes:0 Hours:0 Days:0 ]
A4: System Lock
Exit: 101 Unsafe Place (17)
A1: Secure Settings [ Configuration:Screen & Keyboard Lights On
5 Seconds Timeout (Seconds):0 ]
A2: Secure Settings [ Configuration:Set Pin Timeout (Seconds):0 ]
A3: Wait [ MS:0 Seconds:2 Minutes:0 Hours:0 Days:0 ]
A4: System Lock
Recently I purchase a new car & created a Tasker profile to unlock my phone whenever it recognize my car BT.
Work like a charm, but something I notice that when I get home my phone doesnt unlock like before.
And vice versa in the car, it does at first but my phone lock screen after a while.
My S5 is rooted and using lollipop 5.1.1 the profile I create in Tasker is using BT connected using secure settting, wait 2 secs, n system unlock when safe environment!sent.
As for wifi I used wifi connected with same principle with secure setting.
It as if my two profiles are conflicting with each other?
If anyone could guide on this, please...
Please take note I didn't create these profiles, found them on a YouTube tutorials.
Regards,
Profile: Lock Screen (25)
State: Wifi Connected [ SSID:Sal888 MAC:* IP:* ]
Enter: 101 Safe Place (16)
Run Both Together
A1: Secure Settings [ Configuration:Screen & Keyboard Lights On
5 Seconds Timeout (Seconds):0 ]
A2: Secure Settings [ Configuration:Clear Password Timeout (Seconds):0 ]
A3: Wait [ MS:0 Seconds:2 Minutes:0 Hours:0 Days:0 ]
A4: System Lock
Exit: 101 Unsafe Place (17)
A1: Secure Settings [ Configuration:Screen & Keyboard Lights On
5 Seconds Timeout (Seconds):0 ]
A2: Secure Settings [ Configuration:Set Pin Timeout (Seconds):0 ]
A3: Wait [ MS:0 Seconds:2 Minutes:0 Hours:0 Days:0 ]
A4: System Lock
Profile: Car Lock (31)
State: BT Connected [ Name:SUBARU BT Address:* ]
Enter: 101 Safe Place (16)
Run Both Together
A1: Secure Settings [ Configuration:Screen & Keyboard Lights On
5 Seconds Timeout (Seconds):0 ]
A2: Secure Settings [ Configuration:Clear Password Timeout (Seconds):0 ]
A3: Wait [ MS:0 Seconds:2 Minutes:0 Hours:0 Days:0 ]
A4: System Lock
Exit: 101 Unsafe Place (17)
A1: Secure Settings [ Configuration:Screen & Keyboard Lights On
5 Seconds Timeout (Seconds):0 ]
A2: Secure Settings [ Configuration:Set Pin Timeout (Seconds):0 ]
A3: Wait [ MS:0 Seconds:2 Minutes:0 Hours:0 Days:0 ]
A4: System Lock
