Help Question for when the update comes

[Scimajor]

I successfully used the qdl tool to get 2.2 on my locked Streak. I plan, however, on using the official release when it comes in. When Dell/AT&T finally releases 2.2 for the Streak will I be able to update or do I have to downgrade back to 1.6 first?

If I have to downgrade back to 1.6 will a simple "Restore to factory" do it or is the process more involved?

Also, is there any point (i.e. will the released version be exactly the same)?

 

[bel4_20]

From what I understand once you go QDL there's no going back. Is why I have not done the QDL yet myself.

 

[nb_mitch]

I have been trying for a month to upgrade, and I am just missing something. I have my device rooted and have tried the QDL tool, it gets about half way through the process and fails. I don't recall everything I have done, as I have tried a dozen times.

I rooted the device.
I downloaded some drivers and installed them.
I downloaded the QDL tool

Did you go from At&t 1.6 to O2 1.6 first (that I have not done).

A step by step would be wonderful.

As to your questions. I would just leave it "as is", At&t version of 2.2 will probably have some bloatware and shouldn't have any improvements. Once you get to 2.2, you should be able to do upgrades directly from the dell site.

At&t has yet to update any Android device yet, I am tried of holding my breathe. Because of their flap with Dell, I am begining to wonder if they will ever update the Streak.

I get this:

HW:
Board ID:

Comment:

QDLTool: M 2.7.4.8, Build ID: 1.301.20101022, SW: 12-324012-AUSB1AM-09
--
LOG
--
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Tue Feb 15 19:57:40 2011
Check image DBL: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-324012-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
ERROR[D14]: Streaming hello Failed!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/02/15 19:58:21
Elapsed Time: 40.52 sec

 

[Scimajor]

All I can say is that I followed the following video tutorial and it worked first time and perfectly. Tutorials: QDLTool (repairtool) | Streakdroid

 

[nb_mitch]

All I can say is that I followed the following video tutorial and it worked first time and perfectly. Tutorials: QDLTool (repairtool) | Streakdroid

I must have watched that video 100 times already I just watched it again tonight and tried 2 more times and always fail at the same point.

 

[barry99705]

I must have watched that video 100 times already I just watched it again tonight and tried 2 more times and always fail at the same point.

And that point would be?

 

[nb_mitch]

And that point would be?

The point would be the video doesn't address my problem.

 

[barry99705]

The point would be the video doesn't address my problem.

Ummm, that's not what I meant. At what point does the flashing process fail?

 

[nb_mitch]

Ummm, that's not what I meant. At what point does the flashing process fail?

At the bottom of the post, I include the complete log. It runs for about 10 seconds, then the "Run HEX success" line appears and it freezes for about 5-10 seconds with no more output, then I get the error listed below


#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
ERROR[D14]: Streaming hello Failed!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/02/15 19:58:21
Elapsed Time: 40.52 sec

 

[barry99705]

At the bottom of the post, I include the complete log. It runs for about 10 seconds, then the "Run HEX success" line appears and it freezes for about 5-10 seconds with no more output, then I get the error listed below


#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
ERROR[D14]: Streaming hello Failed!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/02/15 19:58:21
Elapsed Time: 40.52 sec

Heh, don't know why I completely missed that... I put it in fastboot mode then wait a minute or two before attaching to my computer. Never had an issue that way. Also make sure both usb drivers are installed.

QDL Tool Help