• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Android 2.3 & 4.0 WiFi Internet HD 1080P HDMI Google TV Box ARM Cortex A9 Firmware

Stane are you still supporting development for this device? I have the version 1 and it.is having WiFi issues and does not support usb game.controllers. Can you address these issues?
 
Hi,

I was away for a while...

So, it seems my hosting provider have some problems... so I temporary closed my download section until we solve the problem.

About maintaining firmwares and fixing bugs, I'll continue my work and you will be informed on the status.

If I find any question here in the thread (I didn't read it all yet) which I find that needs separate answer except I'll continue to maintain firmwares for all Visson products, I'll reply to it.

Regards
 
PCUSER said:
Hi guys! When i adjust screen size and tap BACK button - android say what all was fine and new settings was saved, but if i open any application - screen settings restore by default. Also online-tv applications showing video only on top half of the screen (very big glitch). Can anyone help me?
Click to expand...

Hi,

which device and which firmware? Is it ATV-101 as mentioned in your device list?
 
Hi,
Stane, yours is the best ics i found for my c03ref tv box.
I'm trying to connect by adb or fastboot, but allways get "offline" message.
I've tested many usb drivers, including last fron android sdk, with no success.
Anyone got it?

thx
 
Andolini said:
Hi,
Stane, yours is the best ics i found for my c03ref tv box.
I'm trying to connect by adb or fastboot, but allways get "offline" message.
I've tested many usb drivers, including last fron android sdk, with no success.
Anyone got it?

thx
Click to expand...

Hi,

That function of usb doesn't work on ICS (old OTG drivers, incompatibilities...). But adb over network should work..... adb connect ip_address. Same for M3 devices, adb over network should work.
 
akaman said:
hi
my android tv box c03ref (8726m)v1

i installed last 20120826_Android_ICS-ATV-108-c03ref firmware.
(before i installed and used all of firmware in v-play download section and have no problem c03ref)

i did fabrica reset and (i shouldnt do it) and my device die now.no screen blue and red lamp on just.


firstly.

i tried with 2gb ,1 gb ,512mb sd card with sdtool and i try 2-28 4.0 firmware,4-23 4.0firmware,and the others with xp computer.and made boot sd card it did it like sdtool read page.

(also i made with winhex like v-play section create recovery sdcard.

i copy firmware files (7 files) to sd card root and (also i made "UpdateKit" directory and copy inside this files also)

then i put sd card in device push reset buton and same time i put power cable like your firmware upgrade (i did before) but not blue on red on and no screen no blink 3 times.

can you help me about it what i did wrong? or is there another way to solve this?

regards.
Click to expand...

i have still this issue and i cant use my box.please help me about it i read all of post in this page and i try everything so specialy 512,1gb and 2g sd card and xp machine with sdtool its ok like this pdf but box not still three blink and i try orginal firmwares in this page and stane's firmware.

what can i do another to work it?i did just factory reset and everything gone in last stane firmware in upside link.

please help about it.
my box this one.

atv-01-8726-android-tv-box-tv-pro-unlimited-application-504f.jpg
 
stane1983 said:
Hi,

That function of usb doesn't work on ICS (old OTG drivers, incompatibilities...). But adb over network should work..... adb connect ip_address. Same for M3 devices, adb over network should work.
Click to expand...

Yesss, I can connect over tcp/ip. Thank you.

Is fastboot possible??
 
akaman said:
i have still this issue and i cant use my box.please help me about it i read all of post in this page and i try everything so specialy 512,1gb and 2g sd card and xp machine with sdtool its ok like this pdf but box not still three blink and i try orginal firmwares in this page and stane's firmware.

what can i do another to work it?i did just factory reset and everything gone in last stane firmware in upside link.

please help about it.
my box this one.

atv-01-8726-android-tv-box-tv-pro-unlimited-application-504f.jpg
Click to expand...

Recovery sdcard must do the job (either tutorial or SDTool). When using tutorial, do not skip Linux part (had someone who is doing all mentioned in tutorial.... and after 30 minutes trying to help him he told me he skipped linux part because he doesn't have one :))

Use non SDHC card, smallest as possible. After SDTool or tutorial, reinsert card and copy all firmware files to sdcard. Put your sdcard in box and power it on holding reset button. That procedure must work. If not, I cant really help you... you can solder ttl interface and using ttl adapter see what's going on on uart when you power on device...
 
Hi
This is an excellent forum, salute to stane1983 and others who are sharing their knowledge and helping novices like me.
From last three days stane1983 download website downloads.v-play.com.hr website is down I am getting following error.

Site is temporary down for maintenance.V.play team

Could someone please upload 6th september 2012 build on any other site. I am in real need for it. I got 6th sept 2012 file from following webpage link which is on first page of this forum
Android 4.0.4 - Google Android 4.0 ARM Cortex A9 1GHz WiFi HD 1080P HDMI Internet TV Box Black
Older Version(c03ref)
http://www.mediafire.com/?yicjsuik2bvclqn

File name is 2-28 4.0 firmware.rar in this link but build is not of 6th sept , after updating with file 2-28 4.0 firmware.rar my box is saying i got 20120225 build. My understanding is there should 20120906 build in this file. I think its wrong build zipped.
Thanks in advance.
My box is Vission (c03ref) .
 
Hello everybody
This is an Super forum, big salute to stane1983 and others who are sharing their knowledge and helping novices like me.

I neead a help and I was searching all this form and did not found to upgrade how to upgrade from 2.3 to 4.0 ATV-108 rev 1 devicewithout reset button or power switch I am not able to find the Upgrade application also.
Then how can I update this device
Model MBX DVT refrece board(c03ref)
android version 2.3.4
Kernel version 2.6.34 (K4101c270)
build number S4101c290
application version A41021110

Please help to upgrade to 4.0 :)
 
Hello everybody
Actually I have small problem.
my wireless mouse work will when i starting the device (TV BOX) but after a few minutes the mouse freezing and dose not working.
I have to disconnect the mouse and connect the wireless and after that the mouse will work agin a few minutes.
I have 2 another mouse all of theme have a same problem.

my board is f16ref

Do you have any solution?
If you don`t have solution please how i can return to the factory firmware?
Another thing the website dos`t work right now.
 
hi forum.
I use Vplay Firmware by Stane in my MeasyX7 . it wasn't easy to install, but is working very well. The only thing that fails is when plays DVDs. Browsing files and playing them with the default player work well, but without menus.
Because of that, I test other players that support DVD menus. MKVs and others files work with hardware decoder. All this players do the job, but DVDs with menus are software decoded and didn't work fine (unsyncronized sound, frames skipped, etc.). I change decoder settings without success.
How can I force use Hardware decode for DVDs ?
Thanks, and sorry about my english.
 
HELP!

WHEN I UPDATE FIRMWARE, REMOTE NOT WORK! HELP!

MBX DVBT C03ref ====> V-Play 20120826_Android_ICS-ATV-108-c03ref

MY REMOTE CONTROL MODEL : jx-1009

WHO CAN HELP ME.......Thanks

please email me
tive@live.com
 
tive said:
HELP!

WHEN I UPDATE FIRMWARE, REMOTE NOT WORK! HELP!

MBX DVBT C03ref ====> V-Play 20120826_Android_ICS-ATV-108-c03ref

MY REMOTE CONTROL MODEL : jx-1009

WHO CAN HELP ME.......Thanks

please email me
tive@live.com
Click to expand...

I can... read 2 or 3 pages back on this same thread. There's for sure some info about the remote problems and configuration.
 
tive said:
i dont know how to do it! replace which remote.conf?
Click to expand...

Find one of original firmwares of your device. Open it's update.zip and inside zip under /system/etc folder you will find remote.conf.

Copy that file over mine inside my update.zip or use ES explorer or any other root explorer and copy it to (device) /system/etc folder and restart the box.
 
akaman said:
hi
my android tv box c03ref (8726m)

i installed last 20120826_Android_ICS-ATV-108-c03ref firmware.
(before i installed and used all of firmware in v-play download section and have no problem c03ref)

i did fabrica reset and (i shouldnt do it) and my device die now.no screen blue and red lamp on just.


firstly.

i tried with 2gb ,1 gb ,512mb sd card with sdtool and i try 2-28 4.0 firmware,4-23 4.0firmware,and the others with xp computer.and made boot sd card it did it like sdtool read page.

(also i made with winhex like v-play section create recovery sdcard.

i copy firmware files (7 files) to sd card root and (also i made "UpdateKit" directory and copy inside this files also)

then i put sd card in device push reset buton and same time i put power cable like your firmware upgrade (i did before) but not blue on red on and no screen no blink 3 times.

can you help me about it what i did wrong? or is there another way to solve this?

regards.
Click to expand...

Hi! Did you fix your trouble?
If yes - share the experience. It may be useful for other people.

If not -before going to higher mathematics and dancing with magic witch drums - go a page or two backward, find my long post and do step by step all "checks-for -a dummy" from it. At least answer questions:
1. What output to your TV are you using while upgrading - AV, or HDMI?
2. Did you try to insert both SD card and USB drive simultaneously with the same upgrade set of files?
3. After/if you tried to push in both SD and USB - did you see any folders after restarting and waiting for 15-20 minutes on any of them that have not been there before - for example, .LOST DIR?

I strongly advise you to do it before you managed to kill your loader.
If you even have your original firmware - it is impossible that your devise is killed.
 
You must log in or register to reply here.
Back
Top Bottom