EasyCamera for Foscam is an Android application for remote surveillance and control with your smartphone or tablet. App is designed for HD-cameras Foscam.
The app supports the following camera models:
FI9826P, FI9826W, FI9853EP, FI9851P, FI9821EP, FI9821P, FI9816P, FI9903P, FI9828W, FI9803EP, FI9803P, FI9831W, FI9831P, FI9805W, FI9821W, FI9805E, FI9804W, FI9818W, FI9801W, FI9802W, FI9820W
The current version of the application is not designed for MJPEG-cameras Foscam, such as FI8918W and others in the series
App also supports some Foscam clones
The list of supported cameras:
Ivue IV2405P
Ivue IV8513PZ
Ivue IV5511E
Ivue IV2503PZ
LUPUSNET LE200
App features:
Get EasyCamera for Foscam on Google Play
If you don't have own HD-camera Foscam, you can connect to Demo cameras.
Connection settings to the Demo cameras Foscam you can get here - http://foscam.us/live_demo (please use cameras with "H.264" icon)
The app supports the following camera models:
FI9826P, FI9826W, FI9853EP, FI9851P, FI9821EP, FI9821P, FI9816P, FI9903P, FI9828W, FI9803EP, FI9803P, FI9831W, FI9831P, FI9805W, FI9821W, FI9805E, FI9804W, FI9818W, FI9801W, FI9802W, FI9820W
The current version of the application is not designed for MJPEG-cameras Foscam, such as FI8918W and others in the series
App also supports some Foscam clones
The list of supported cameras:
Ivue IV2405P
Ivue IV8513PZ
Ivue IV5511E
Ivue IV2503PZ
LUPUSNET LE200
App features:
- Easy management of cameras
- Motion detection
- Infra Led on/off/auto
- Video Flip
- Video Mirror
- PTZ control (only supported by cameras with PTZ)
- PTZ presets
- Adjust brightness, contrast, hue, saturation and sharpness
- Two-way audio - listen and talk (for H264 mode). When you talk (button with microphone icon is green) you can't listen audio from the camera to avoid increasing noise level. To listen audio from the camera please turn the microphone off (button with microphone icon is white)
- Show/hide control buttons for full screen view
- Display the current camera settings
- Snapshot to SD card
- Darkening video/default video settings. If you have access to camera administrator account, pressing only one button you can set to zero values of contrast and saturation, and the camera image will be black. Users with operator account don't have access to change these settings
- Support for two video transfer protocols - sequence of images (JPEG Snapshots) and video stream based on codec H264
- If "JPEG Snapshots" is selected as the video transfer protocol you can set delay for sequence of images. Default - zero seconds
- If "H264" is selected as the video transfer protocol you can select one of two video modes - Sub Stream (in case of slow Internet connection, worse video quality), or Main Stream (in case of fast Internet connection, better video quality). Default - Main Stream
- Supports up to 10 cameras
- Can be used as baby monitor
Get EasyCamera for Foscam on Google Play
If you don't have own HD-camera Foscam, you can connect to Demo cameras.
Connection settings to the Demo cameras Foscam you can get here - http://foscam.us/live_demo (please use cameras with "H.264" icon)
Last edited: