• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [International Tegra 3] Help HTC one x root and rom issues

P

phippsy20

Lurker
Hi Guys,

So basically last night i decided to put CyanogenMod 10.1 onto my phone, i though it would be easy enough, i was wrong. So basically after about 2 hours i got CyanogenMod to boot when it finally booted It came up with an error message saying unfortunately the process com.google.process.gapps has stopped, so i looked up a fix to the issue, tried to re install the rom and came up the same. So since then i have tried many things all making the phone worse and worse and now i fear it is pretty much bricked.

So at the moment i can open boot loader and flash images on, open recovery to clock work mod. When it tired to boot it only says HTC quite brilliant and stays on that screen. also it wont turn off..

things to note:

eMMC-bootmode :disabled
CPU-bootmode: Disabled
HW secure boot: enabled
S-on
modem path: off

Please help this is urgent as i don't have another phone
 
If you can get to the bootloader and recovery, I'm 99.99% sure you're recoverable. :)

Can you restore the nandroid backup you made before you started? You'd need to flash the boot image manually as S-ON devices can't write to the boot partition in recovery.

What's your hboot version btw?
 
OK so i neglected to do a back up which i regret now, umm my boot loader is 1.39.0000. I have also tried to flash another persons nandroid backup and i was unsuccessful. However i was probably doing it wrong as this is my first attempt at installing a rom.

I would much appreciate a guide because all of the ones i have been trying haven't helped me much.

Thanks.
 
Ok thanks for that i will give it a try tomorrow and I will get back to you with the results.

Thanks for all of your help you have been very helpful and its very much appreciated.
 
Ok so i have just started to tyr your solution, however it is saying Battery level is to low to flash, and i cant turn off the phone and let it charge.

What should i do?
 
Thank you so much for your help i have put CM10 on to my phone sucessfully and is now working 100%. You are an absolute legend mate, thank you so much :)
 
You must log in or register to reply here.
Back
Top Bottom