Help Please help stuck on bootloader

[gtpdjw]

I was trying to upgrade to Gingerbread.please help rsd lite said failed flashing process and now it it stuck on the boot loader sreen and won't do anything I even tried flashing it again same thing. I used rsd lite because i have used it before and downloaded this Android 2.2.1 System Version 2.3.340 Full (VRZ_MB810_2.3.34_1FF_01) again please help

 

[Doit2it]

I'm sure you did a battery pull and reboot.

If that didn't work this is from the FAQ on THIS SBF page
I know it's about a bootloop not bootloader issue, but it's good advice.
I had to do a factory reset after my SBF to FroYo cause of a bootloop. I had no problems after that.

Q: I did your sbf and it worked but now I'm stuck in a bootloop.
A: Can be caused by a botched download of the .sbf file. Download again and re-flash. Some people also resolve this issue by performing a factory reset. To do this boot into the system recovery by holding home + power, keep holding home until an ! comes up, press "Search", browse to "Factory Reset", and perform it. You might want to try this before reflashing as it takes less time.

 

[larryfish]

Hey gtpdjw, did you get things working again? I have run into the same issue myself and there many many ways it seems to resolve it. However, on my BL 30.04 display I am getting "code corrupt". Attempting a factory reset did not help either.

I am currently downloading VZR_MB810_4.5.602_1FF_01.sbf and I thought I would give it a try.

Any other ideas?

Thanks!

-larryfish

 

[larryfish]

UPDATE:

I retried unzipping the .602 sbf from the tutorial before trying VZR_MB810_4.5.602_1FF_01.sbf. I guess the third try was the charm....because it worked! The only difference was that the green msg light was on the entire time the flash was upload/install was going on.

Now I am rooted on 2.3.3

Anyway, awesome site everyone. My next project is to remove all the bloatware and work on optimizing the performance.

I'm no longer scared! ;-)