• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

SIPDroid Set-Up Help

Have you had a look at the help file, link in my post above? All I did to connect WiFi is to access WiFi prefs. under settings under the menu key. Scan for networks and enter any security needed. Thats just my 2 cents, it may not help you though.

Andy :)
 
Have you had a look at the help file, link in my post above? All I did to connect WiFi is to access WiFi prefs. under settings under the menu key. Scan for networks and enter any security needed. Thats just my 2 cents, it may not help you though.

Andy :)
Thanks, but all I want to know is...

1. Do i need to have a cell-phone plan/sim card in order to use an Android phone to make land-line calls?"

2. Do i need to have unlocked/special version of the phone, or will any G1/G2 phone that I buy used do, for 1) to work?
 
I make a call to a US Mobile phone, but it lefts the voicemail, i am sorry.
clear.gif
 
i setup sipdroid on my verizon droid. i connected it to my office toshiba pbx (CTX) and for incoming it works great/. i just cant get it to go off-hook so i can dial out. any ideas?
thanx
 
What settings do you use in sipdroid to work?

I think i changed something in the SIP Account Settings, and the light is red, and says:"Registration failed. 404 not found."
 
Always after set up with VOIP provider, Restart your mobile.
Call the VOIP provider & let him check if your call is getting through his gateways.
VOIP with Droid does not work with all VOIP providers
 
Did you see the link I just posted?
How To Set Up VoIP on the Motorola Droid on Verizon Wireless using Sipdroid for Free Calls | Dave's Tech Shop

The 404 makes it sound like you don't have an internet/data connection.

Sure would be nice to be able to add comments on the above mentioned link.... are you the owner of that Blog MountainX?

I just was wanted to have a little more insight on adding pbx.com into the equation. I have sipdroid 1.3.10 beta on my droid, and also have a gizmo5 acct. any ideas?

Thanks!
 
Sure would be nice to be able to add comments on the above mentioned link.... are you the owner of that Blog MountainX?

I just was wanted to have a little more insight on adding pbx.com into the equation. I have sipdroid 1.3.10 beta on my droid, and also have a gizmo5 acct. any ideas?

Thanks!
yes, that's my blog. I apologize, but unfortunately I do not have time to administer the blog to the level required to allow comments (because then I have to deal with spam, registrations, emails, and a bunch of other stuff that is time consuming). But we can discuss it here.

I'm running Sipdroid 1.3.10 on my Droid too. I have used Sipdroid with and without pbxes.com. In the blog post I show how to do it without PBXes.com, but at the moment I'm running with PBXes.com on my Droid. So I can probably help you do that. However, PBXes is a little complex. So you will need to read their help and invest a little time learning how it works. Now that I have it working, there are no problems. I even decided to upgrade to a PBXes paid account (the cheapest one).

So let me know what specific problems you are having and I'll reply here.
 
Thanks! I kinda figured that may be the case, I have had to do the same on one blog.

OK, I have set up pbx.com free acct, and have gone through the literature online. I think I just about have it "partially" figured out. Perhaps you could fill in a few gaps!
CAP201002042119.jpg

Here's where I am, I now have green light, and was able to place a call from "wifi only - airplane mode" on droid to home number. It showed up as gizmo +number.

Is it posible to change this to show my actual cell number? Have you been able to accomplish this?

and, I can't receive calls on the phone this way. It bumps me right into voicemail. Have you gotten past that yet?

I have green lights on pbxes.com status page also.

OH, here's what my log on gizmo5 is looking like....
gizmo5-1.jpeg


and... the trunk settingon pbxes.com:
pbxes-1.jpeg

Thanks again!


...you will need to read their help and invest a little time learning how it works. Now that I have it working, there are no problems. I even decided to upgrade to a PBXes paid account (the cheapest one). So let me know what specific problems you are having and I'll reply here.
 
Is it posible to change this to show my actual cell number? Have you been able to accomplish this?

and, I can't receive calls on the phone this way. It bumps me right into voicemail. Have you gotten past that yet?
Glad to help. I'll try to answer your questions after dinner, if it isn't too late. For now, let me just say that, yes, I can set any caller ID number I want using this setup. And I can certainly receive calls. However, setting up inbound routes on PBXes.com is one of the harder steps to understand. I'll point you to a good tutorial when I come back.
 
Glad to help. I'll try to answer your questions after dinner, if it isn't too late. For now, let me just say that, yes, I can set any caller ID number I want using this setup. And I can certainly receive calls. However, setting up inbound routes on PBXes.com is one of the harder steps to understand. I'll point you to a good tutorial when I come back.

Thanks! I added several snaps of some of my settings, to let you see where I am.
 
OK, here's the link:
[GUIDE] SIPdroid & Google Voice setup (updated 10-19-09) - xda-developers
This tutorial will help you set up incoming routes at PBXes.com and everything else. Even though the tutorial mentions an IPKall DID, you don't actually need one. I did it without using IPKall. Actually, I've done it a couple different ways, and at the moment I'm using CallCentric. However, the basic steps in the link above will work for any situation. However, pay attention to the updated steps. Some of them don't have screenshots, so you have to read carefully.
 
OK, here's the link:
[GUIDE] SIPdroid & Google Voice setup (updated 10-19-09) - xda-developers
This tutorial will help you set up incoming routes at PBXes.com and everything else. Even though the tutorial mentions an IPKall DID, you don't actually need one. I did it without using IPKall. Actually, I've done it a couple different ways, and at the moment I'm using CallCentric. However, the basic steps in the link above will work for any situation. However, pay attention to the updated steps. Some of them don't have screenshots, so you have to read carefully.

Do I need to disregard Gizmo5 altogether then?

(sorry.... jumping the gun... going to read now!!!)
 
Do I need to disregard Gizmo5 altogether then?

(sorry.... jumping the gun... going to read now!!!)

No, the same basic concepts will work with Gizmo5 or any other SIP provider. Gizmo5 does not give you a DID, however. That's where IPKall could come in handy. I decided to buy a DID from CallCentric (Dirt Cheap DID) for $2.95/mo. However, that's not necessary to get this working.
 
No, the same basic concepts will work with Gizmo5 or any other SIP provider. Gizmo5 does not give you a DID, however. That's where IPKall could come in handy. I decided to buy a DID from CallCentric (Dirt Cheap DID) for $2.95/mo. However, that's not necessary to get this working.

I set up a IPKall acct, and as I go through pbxes.com, here's a couple questions:

ring group:
it asks for my sip ext. Would this be the username? or the "My Droid <100>" not sure exactly how to enter that.

I currently still have my gizmo5 info within my current only trunk. Should I just delete that, and change it to the IPKall info? how did you handle that?

btw, CallCentric does have some great rates. We were looking at vonage to switch from landline in the house; but they have even beter deals!
 
No, the same basic concepts will work with Gizmo5 or any other SIP provider. Gizmo5 does not give you a DID, however. That's where IPKall could come in handy. I decided to buy a DID from CallCentric (Dirt Cheap DID) for $2.95/mo. However, that's not necessary to get this working.

Well, still haven't been able to get it working for incoming calls. Can you expand a little on that?

I am using the pbxes.com info for the extension and the current SIP trunk has the gizmo5 login info. Do I need to just change the gizmo5 info for the ipkall info? (I know I'm close!)

also....

Configure IPKall log into your ipkall account and enter your SIP number and server information.
(updated) to route calls directly to PBXes: Enter your-pbxes-extention as sip# and pbxes.com as the sip proxy.

IPkall won't accept my pbxes-ext as a SIP number... am I missing something obvious there?
 
ring group:
it asks for my sip ext. Would this be the username? or the "My Droid <100>" not sure exactly how to enter that.
The SIP ext is what you defined in PBXes under "extensions". I just used integers (1,2,3, etc.).
BTW, I hope this doesn't make it more confusing,but you do not have to set up ring groups. I did at first because the tutorial used them, but once I "figured out the madness" of PBXes, I decided to do it without ring groups for now. That simplified some things and it works fine. Ring groups are a useful feature and I'll probably add them back later.
I currently still have my gizmo5 info within my current only trunk. Should I just delete that, and change it to the IPKall info? how did you handle that?
Use Gizmo5 (or CallCentric as your trunk). I currently have CallCentric and Sip2Sip trunks defined.
btw, CallCentric does have some great rates. We were looking at vonage to switch from landline in the house; but they have even beter deals!
CallCentric has a reputation for top quality. (Check DSLReports, for example.) Get the Dirt Cheap DID which gives unlimited inbound calling. (If you use Google Voice, all calls can be free.)

If you go with CallCentric, I can tell you exactly how I have PBXes set up at the moment because I'm using CallCentric. Here's how to do it:

Extensions: SIP:
Number: 1
Display Name: SIP
username: myusername-1
dtmfmode: rfc2833
audiobypass: yes
connectioncheck: no
handoff: no
callforwarding: if no answer, goes to my GV after 20 seconds

Trunks:
Trunk Name: CallCentric
dtmfmode: rfc2833
audobypass: yes
enter your CallCentric account info ("1777xxxyyyy" & password)
server: callcentric.com
register: yes
outbound caller ID: I use my GV number here. Use whatever you want.
dial rules: (assume your home area code is 543)
1543+NXXXXXX
1+NXXNXXXXXX

Inbound Routing: I made a route called "/" (by leaving trunk blank)
Extension: "1"
Regular hours: "*"

That's it. That should get you working with Sipdroid & CallCentric on your Droid. Inbound and outbound calling will work.

Be sure to check out the PBXes status monitor. It's cool.
Once you have this working you might want to play around with more advanced PBXes features.

I have not tried the call-back feature yet, but that's next on my list.
 
Thanks, but all I want to know is...

1. Do i need to have a cell-phone plan/sim card in order to use an Android phone to make land-line calls?"

2. Do i need to have unlocked/special version of the phone, or will any G1/G2 phone that I buy used do, for 1) to work?


Answers

1) No. Provided you have access to wifi
2) No.

Note. If you don't have access to wifi, all you need is to get a data only plan from your wireless carrier.
 
Back
Top Bottom