SuperMAD with my SuperPAD

[soldierboyz01]

Hello all,
I think I've read every post available for this device I have sitting in the corner, I bought it off of a friend (while it was working), later decided to tinker with it, by resetting it, It basically stop working right since, I can boot up to the first screen, the green android picture, then the small words android, and nothing after that. I've tried rebooting, reinstalling, and lord knows what else, nothing changes. I've recently bought a new micro sd card thinking that would help, all I need now it the actual firmware to add to it, I'm starting fresh. If you can help with the firmware, instructions, or advice, I would greatly appreciate it.

Here is what I have

SuperPAD 3
Model number: DK1032
Android Version: 2.3.3
Baseband: unknown
Kernel Version: 2.6.35.7-info TM tom@tom-optiplex-380#48
Build Number: GRI40

I've seen a few people with the same device asking for firmware as well, if you have any success please let me know, and I will try and do the same.

 

[D-U-R-X]

Hello and welcome soliderboyz01 - thanks for joining!

I'm afraid I can't help, as I am not famililar with your tablet. If you check in General Tablet Talk - Android Forums you may find others who have the same tablet/can offer some solutions!

Hope you find the info you need!

 

[AntimonyER]

Welcome to AF soldierboy! Sorry to hear about your tablet troubles, I hope you can get them resolved. Thanks for joining up!

 

[DonB]

Soldierboy, Welcome to AF,we are glad to have you, hope you enjoy the site, :ciao:

 

[soldierboyz01]

Thanks guys, I am persistent, so hopefully I can get this thing going. I have found a few sites that could possibly help. Here are my leads so far.

1. This is a Chinese site, but has all their information in English. a side from that it is very informative about many Android products.

It has the methods of firmware installation for Z102 using TF, (The Flytouch firmware for android 2.2 and 2.3) I don't want to give anyone the wrong information for your product, so see for yourself. Then you can decide if it is what you need for your Tablet or phone. AZhuo Digital ---Zenithink Z102 ZT280 10 inch Android 4.0 ICS Tablet PC, Built-in GPS & RJ45, HDMI, 1G/8GB, Flash 11 ZePad

Reviews for this information is here FIRMWARE FLYTOUCH SUPERPAD 6 (VI) V10 CORTEX A8 VIMICRO - SlateDroid.com - Page 17


2. Flytouch 5 Firmware & Tools Download Area aPad.TV The home of the aPad. Forums - Flytouch 5 Wopad Firmware.

Good Luck, and if you can assist me please do so.

soldierboy.

 

[soldierboyz01]

Blazing Dragon GB - Android 2.3 - Made by Gaboros Flytouch 5 GB Custom Firmware: The Blazing Dragon.

I will try this guy, let you know if I have any luck.

 

[soldierboyz01]

Ok, busy with online classes, but today I am working on the Flytouch, there's an internal sd card inside, (4,8, or 16 gig), I have a 4 gig, I've taken it out and I will be installing a 16 gig TF card, with updated software. As of now the blazing dragon software is promising, but I am doing some extra research, just to see if 2.3 can be upgraded to 4.0 firmware.

If all goes well, I would recommend just opening up the device, unscrewing the motherboard, the SD slot is on the opposite did of it, taking out the SD card, use SD formatting, and reformat it with 2.3 or whatever your original software was, or if you have some balls, update it to some custom firmware. What is the worst that can happen, your device does the same damn thing that it was doing before you opened it. I am simply making a recommendation so don't blame me for anything that happens. Anyway, I am about to go in...with my plan, let you know what is the outcome. if all goes well I'll give directions to everything.