• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [TUTORIAL] Unbrick Mini S5570 (Bricked With Black Screen)

suicidallooney said:
Did you uninstall the drivers before you started? you can still continue even if it doesn't show
Click to expand...

yea i did it, and i reboot my computer.! and i installed it trough Kies.! same thing. The computer doesnt recognize my phone, it regnized it only i press Vol up+home+power.
 
ford14 said:
yea i did it, and i reboot my computer.! and i installed it trough Kies.! same thing. The computer doesnt recognize my phone, it regnized it only i press Vol up+home+power.
Click to expand...

If your phone is detected by Odin --it will show something like COM 5, in yellow background at the top side-- then you can conitnue flashing your device with gingerbread firmware.
:)
 
hey plzz help me....i got every image u shown....just cant get that odin driver installation how did u do it....in odin com port changes to yellow but always i get "setup connection" or "cannot open the usb serial port. code: 5" error.
I restarted ma PC several times.. As soon as i restart windows installs drivers nd thats it again the same...if i open odin it detects too but gets stuck again..!!

help mee..let me know what am misiing..!!
 
Try this .... It might work or maybe not --it is not tested-- But don't worry since your device is already bricked it can't get worst....

After installing drivers for usb. You can download and install the drivers from here Hotfile.com: One click file hosting: SAMSUNG_USB.rar . Set up everything in Odin for flashing a new firmware for your device.
Now Go to Download mode --if you are unable skip and follow the next step-- and connect your phone to your pc. If Odin detects it (if you see COM 5 --or similar-- on yellow background ) then press Start to begin installing your firmware.

If it doesn't detect then remove the battery and other cards (sim and sd) from your device. COnnect it to pc. Hold down Volume Down + Home + Power Buttons and then at the same time insert the battery.

Now you should be on download mode and your phone should be detected by Odin. Hit start and flash the new firmware. :)
 
ibrahimkb1996 said:
hey plzz help me....i got every image u shown....just cant get that odin driver installation how did u do it....in odin com port changes to yellow but always i get "setup connection" or "cannot open the usb serial port. code: 5" error.
I restarted ma PC several times.. As soon as i restart windows installs drivers nd thats it again the same...if i open odin it detects too but gets stuck again..!!

help mee..let me know what am misiing..!!
Click to expand...

While the drivers are installing when the yellow box appears start odin before the drivers finish installing
 
suicidallooney said:
While the drivers are installing when the yellow box appears start odin before the drivers finish installing
Click to expand...
when i conect with normal mode pc not detect anything.on device manager also not shown >samsung composit device< if on download mode can detect by pc and odin but in odin also cant going on second com port and i ll try install,uninstall and restart and folowing all this tutorial but i stuck on first thing as PC not detecting in normal mode, have u any idea? im using window vista.even i m tryed with odin,and all firmware uninstall and install by restart PC every time.
 
I tried this:
Step 1 – Prepare Odin with a WORKING firmware and make sure everything is ready to go

Step 2 – Remove battery, SIM card and SD card, and connect your phone if it isn&#8217;t already connected

Step 3 – Hold Volume down + Power + Home button at the same time

Step 4 – Insert the battery while holding down the above buttons

But after I put in the battery, nothing happens..any suggestions?
 
Hey i've tried it and i did excactly what you say..In the middle of this when i used odin it told me that it had problem with usb portal code.
At the end when i used odin it stucks on setup..
What shall i do now?? :S
 
If there are people still stuck with there phone and have not found a solution nor has the tutorial worked for them, if you are okay with it you can post your phone to me and i will fix it and send it back to you free of charge.

I'm in the UK, London, and there is no garantee i will be able to fix it, either way i will send your phone back free

Since your bricked phone is now considered junk/useless/brick i don't think it would be an issue of trust posting it to me as i'm doing it for free. That is the only other help i can give other than the tutorial
 
suicidallooney said:
If there are people still stuck with there phone and have not found a solution nor has the tutorial worked for them, if you are okay with it you can post your phone to me and i will fix it and send it back to you free of charge.

I'm in the UK, London, and there is no garantee i will be able to fix it, either way i will send your phone back free

Since your bricked phone is now considered junk/useless/brick i don't think it would be an issue of trust posting it to me as i'm doing it for free. That is the only other help i can give other than the tutorial
Click to expand...


so give ur email or my email is wilfordjb14@gmail.com and i apreciate wat u doing
 
my windows doesnt recognize my phone, shit !!!, btw i bricked my phone using that GODDAMN ROM MANAGER selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
 
Thanks a lot for posting such a helpful article :) My S5570 was bricked but i recovered it after following the steps mentioned above.

My phone is working fine, do i have to hard reset it? as i just flashed it nothing else.
 
Sn00per said:
Thanks a lot for posting such a helpful article :) My S5570 was bricked but i recovered it after following the steps mentioned above.

My phone is working fine, do i have to hard reset it? as i just flashed it nothing else.
Click to expand...


wat kind of brick did u have!! plzz answerr
 
@Frod14

Actually I try to update my froyo 2.2.1 to Gingerbread 2.3.4 through Odin. Everything goes fine, but when Odin says RESET . at that moment my cell phone goes blank .. dead or u can say bricked. i removed the battery sd card then tried to Switch On the phone but nothing works. When i try to connect it via pc .. only odin detects it by some port i didnt remember. Then i followed the steps, and it works for me, in the very first attempt :) thats the story :)
 
Hi,

I tried this tutorial but unfortunatelly is not working for me. I got port from the ODIN but it gave me the "setup connection" or the "wrong usb port" messages. I pressed the start button as the yellow box appeared.

I bricked my phone in the CWM so this process is maybe not good for me.

Thanks for the tutorial,
regards, Attila
 
Hey...help me....my computer & odin only detect my mini(GT-S5570) when i press Vol Up+Home+Power ....i can't open download mode(Vol down+Home+Power)...
In the odin, it display 1(COM4) with Yellow color and , when i press start,it shows

Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...

And it can't continue....pls help me....
 
suicidallooney said:
I e-mailed you, anyone who is interested send me a private message for details on how to send, i will not be responsible for any phones lost in the post so a recorded mail service is recommended
Click to expand...




hello suicidallooney....can u help me wit this...?
http**//3.bp.blogspot**com/-TyPidEOiGG8/Tvr6BsOocNI/AAAAAAAAABM/jK5eoPV_6Xs/s1600/gt5570.jpg<br>please remove **

what should i do...? i have uninstall/install driver more then 30 times already but still cant work
 
i get the samsung logo on and off,and i tried with odin
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer

when rebooting, the screen light gooes on and off, whithout the samsung logo. reinserting the battery, the samsung logo comes back and the screen turns on and off.
 
hi, i bricked my s5570 when i installed a wrong version of clockworkmod on my device. the mod installed okay but the next moment my phone just went black without any tone or vibration. i tried volumedown+home+power & home+power but to no avail. so googled my query & come to yr tutorial. i followed it word to word but my prob is that neither does my phone shows up in the devices & printers altogether nor does odin detects it. so i uninstalled the drivers & reboot, connected my phone thru usb but no sign of it anywhere in my pc & i even checked thru device manager but no good, then i reinstalled drivers using kies, reboot, took off my battery, sim, sdcard then pressed voldwn+home+pwr buttons all at once & reinserted the battery & kept holding for nearly a minute but nothing happened. is there any chance i can still unbrick it.

note - only yesterday did i upgraded my phone to gingerbread 2.3.6 thru kies. also while i was installing the clockworkmod i was actually trying to back up current rom & since rom manager was unable to recognize my device, i just chose the very first listing that rom manager displayed. while the clockworkmod was installing thru wifi, my phone was also connected thru usb.
anyways i wud b extremely grateful if u cud provide me with a solution. thanx a lot.
 
nothing works with me, all posts i've read here are same as my problem. my phone is just 2weeks old when i bought it, just so frustrated by now...

edit:

my sgm was fixed with jtagging and a software called medusa.
 
You must log in or register to reply here.
Back
Top Bottom