• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

usb tethering

C

catonano

Newbie
usb tethering won't work

on fedora 19 with a lg l5 with android 4.1.2

I described the sympthoms and posted a couple of screenshots on a fedora forum, here

usb tethering - FedoraForum.org

Is anyone using the same combination ?

I tried on fedora 20 and it's even worse, it doesn't even react when I pull the usb cable in

Thanks for any hint
 
I had trouble with it today too, but I just switched to a wireless hotspot rather than diagnose it.

My main computer didn't even recognize the S4 being plugged in, so I think it was on my computer end, not the S4.
 
only thing that comes to mind, have you tried disabling the media mode or whatever the poor excuse for mass storage is called these days?
 
I sometimes tether my Linux Mint laptops with a Samsung and a Lenovo phone, but I've not been using them as "Mobile Broadband". I go into the phone's tethering settings and select USB tethering, the laptops see them as "Wired Ethernet", and work straight away.

If you're using "Mobile Broadband", have you got the correct APN details for the carrier? When I've used USB 3G/4G modem dongles in Linux which work as "Mobile Broadband". I just select country and carrier. in my case China > China Unicom, and it does the APN settings automatically.

What's that "Provider 22288", is that your carrier? When I tether Linux to my phones, it doesn't even know the phone's IMEI, it's just an internet connection via USB.

The "Connected" networking interface is a Samsung Galaxy Win phone on USB, Linux Mint 15 KDE.
65688d1387589610-usb-tethering-tethering.jpg


On LG phones, does USB tethering work as "Mobile Broadband" rather than as a networking interface?
tethering.jpg
 
I just hotspot my phone with my OpenSuse 12.3 and never use a cable. I forgot that you could

Ok just set up to usb tether and OpenSuse picked it up just fine. So no idea of what could be going on with yours unless its a bad cable. Have you tried another cable?
 
So I have a question now which is better to do to set up as a mobile hotspot so I can use a few devices or to tether which only gives me the computer?

Which is faster? More secure?
 
argedion said:
So I have a question now which is better to do to set up as a mobile hotspot so I can use a few devices or to tether which only gives me the computer?

Which is faster? More secure?
Click to expand...

Speed, no difference I think. Unless your 4G is faster than your WiFi.
Security, no problem. Provided the hotpot is not using open or WEP(both insecure). As long as the hotspot is set to WPA or WPA2, will be fine.

I've used both, USB and WiFi tethering no problem, on Linux and Mac.

Even if using the phone as a WiFi hotspot, can still plug the USB in just to keep it charged.
 
argedion said:
I just hotspot my phone with my OpenSuse 12.3 and never use a cable. I forgot that you could

Ok just set up to usb tether and OpenSuse picked it up just fine. So no idea of what could be going on with yours unless its a bad cable. Have you tried another cable?
Click to expand...

no, I haven't tried another cable. But because the sympthoms are different among fedora 19 and fedora 20 (that I also tried) I assume it's not the cable.

But this is a good hint. I will try.

Thanks
 
argedion said:
I just hotspot my phone with my OpenSuse 12.3 and never use a cable. I forgot that you could

Ok just set up to usb tether and OpenSuse picked it up just fine. So no idea of what could be going on with yours unless its a bad cable. Have you tried another cable?
Click to expand...

thanks for taking the time to test the cable tethering ! :)

Well your suggestion is probably the best until now.

I didn't consider the hotspotting possibility

Should it work it would solve the problem

I'll let you know (I'm not sure as how to switch the hotspotting on on the phone)
 
Would this be of use? I know its for Arch Linux but the steps should be similar. I know I had to do this once and followed similar steps.

Have you checked to see what drivers/modules are being used? Maybe you're using the wrong one. You can check loaded modules typing "lsmod" into a terminal.
 
argedion said:
So I have a question now which is better to do to set up as a mobile hotspot so I can use a few devices or to tether which only gives me the computer?

Which is faster? More secure?
Click to expand...

The main difference, IMHO, is that with USB you don't need to worry about keeping your phone charged. Acting as a wireless hotspot sucks battery, while being tethered charges the phone.
 
SulkyAndroid17 said:
Would this be of use? I know its for Arch Linux but the steps should be similar. I know I had to do this once and followed similar steps.

Have you checked to see what drivers/modules are being used? Maybe you're using the wrong one. You can check loaded modules typing "lsmod" into a terminal.
Click to expand...

I hadn't thought about that.

It wasn't of any specific help, but I still didn't try the wi fi tethering, so there's hope !

As for the driver module, if you're curious, here it is:

Code: 
[catonano@xps ~]$ lsmod | grep usb
usbnet                 37645  1 cdc_ether
mii                    13527  1 usbnet
usb_storage            56690  0 
btusb                  28170  0 
bluetooth             361772  23 bnep,ath3k,btusb,rfcomm
 
catonano said:
As for the driver module, if you're curious, here it is:

Code: 
[catonano@xps ~]$ lsmod | grep usb
usbnet                 37645  1 cdc_ether
mii                    13527  1 usbnet
usb_storage            56690  0 
btusb                  28170  0 
bluetooth             361772  23 bnep,ath3k,btusb,rfcomm
Click to expand...

Interesting. When I run that same command on Linux Mint I get this:
Code: 
usbnet                 31879  3 rndis_host,rndis_wlan,cdc_ether
usbhid                 47074  0 
hid                   101002  2 hid_generic,usbhid
usb_storage            57204  0

I googled rndis_host and the 1st link was an Android USB Tether wiki page for Gentoo. So it may be worth a look.

Edit:
Going through the links, it looks like RNDIS is probably important. These two Gentoo pages talk about it: Android 2.2 USB Tethering Tips and [Solved] USB Tethering (HTC eris Android)
So try adding the rndis_host and the other modules. Then enable tethering on your phone and with Fedora use "dhcpcd usb0" in the terminal.
 
SulkyAndroid17 said:
Edit:
Going through the links, it looks like RNDIS is probably important. These two Gentoo pages talk about it: Android 2.2 USB Tethering Tips and [Solved] USB Tethering (HTC eris Android)
So try adding the rndis_host and the other modules. Then enable tethering on your phone and with Fedora use "dhcpcd usb0" in the terminal.
Click to expand...

Thanks

I'm not too well versed in this kind of linux stuff

I can't find the rndis_host thing in no package. As for dhcpcd, it's in a package called wlassistant, it has 60 megs of kde dependencies. I use Gnome, I won't install such a thing just for the tethering.

I suppose the Fedora guys had something else in mind.

I can't figure out how the general layout of packages is supposed to be, ehm, layed out. I don't know my way around this

I had hoped some help would have come in the Fedora forum, but my post there is around 180 views now and no answer :-(
 
So modprobe rndis_host and modprobe wlan does nothing? As for dhcpcd, I have no idea. I don't have it installed either. I use Mint's Cinnamon which is based on Gnome.

Is usb debugging on?
 
SulkyAndroid17 said:
So modprobe rndis_host and modprobe wlan does nothing? As for dhcpcd, I have no idea. I don't have it installed either. I use Mint's Cinnamon which is based on Gnome.

Is usb debugging on?
Click to expand...

Ok, so :


  1. rndis_host is not present at all. Probably because the Fedora policy is not to have proprietary stuff in the default distribution
  2. I use the stock network manager in the Gnome desktop, I don't know if it's Cinnammon or something else
  3. No, usb debugging is off. I'll try with it on and report back
thanks for your follow ups ! :)
 
catonano said:
Ok, so :


  3. No, usb debugging is off. I'll try with it on and report back
thanks for your follow ups ! :)
Click to expand...

Ok, I activated the usb debugging and rebooted the phone. Nothing changes

On another side I tried wi fi tethering and it works

Probably fedora has to mature a bit in this regard

thanks anyway
 
No problem,

The only other idea I have would be to compile all the modules yourself and add them to the kernel. But that's more work than it should be to just tether. Anyway, at least you have wifi tethering.

Maybe in the future this will work out. I'd certainly give Fedora another try if it did. Good luck. ;)
 
I left fedora on v 17. I just didn't care for the way gnome was going and I decided to go back to OpenSuse. I never tried usb tethering on fedora though. I did hook my phone up to it all the time to do adb stuff but never had an issue with that.
 
I want to thank all of you, guys, who contributed to this thread.

Even if I didn't get to a solution, I still appreciate the feedback. And I find frustrating the silence of other forums.

Kudos
 
You must log in or register to reply here.
Back
Top Bottom