Post your benchmarks

[breadnatty08]

Feel free to post any or all benchmarks. Specify if you're on a custom ROM and/or overclocked.
CM10, overclocked to 1.6 in performance mode.

 

[stridermt2k]

Mine says the same.

Do you see a potential for variances here?

 

[breadnatty08]

Some higher, some lower, won't be terribly different. I'm using a custom kernel that's overclocked so it may run higher than others on stock.

 

[stridermt2k]

Still cool to see our little tablet do as well as it does in the numbers.

Impressive stuff!

 

[Jay Aristide]

Normally, I run just as listed below, but @ 1.3GHz w/SIO+Interactive (defaults), but I figured I'd give you guys an idea what this monster is truly capable of

Stock 4.1.1
_motley's linaro optimized kernel 1.0.6 (didn't like 1.0.7) OC'd to 1.6GHz (GPU OC'd from 416MHz to 484MHz) w/Performance+SIO
/data remounted (-o remount,noauto_da_alloc)
init.d activated
zram initialized
160dpi

(Linpack multi thread)

 

[stridermt2k]

Normally, I run just as listed below, but @ 1.3GHz w/SIO+Interactive (defaults), but I figured I'd give you guys an idea what this monster is truly capable of

Stock 4.1.1
_motley's linaro optimized kernel 1.0.6 (didn't like 1.0.7) OC'd to 1.6GHz (GPU OC'd from 416MHz to 484MHz) w/Performance+SIO
/data remounted (-o remount,noauto_da_alloc)
init.d activated
zram initialized
160dpi

(Linpack multi thread)

YOWZA!

-and it's stable and all?
VERY COOL!
WAITAMINUTE!

-and it's running cool and all?

VERY...AWESOME!!!


I'm not the tweaker, but I am very happy to read about it!

 

[Jay Aristide]

YOWZA!

-and it's stable and all?
VERY COOL!

I'm not the tweaker, but I am very happy to read about it!

Extremely stable, but not very cool (gets quite warm at that speed). Also, if you're using it AND charging it, it won't discharge, but it won't charge, either..

 

[stridermt2k]

Extremely stable, but not very cool (gets quite warm at that speed). Also, if you're using it AND charging it, it won't discharge, but it won't charge, either..

Yeah there's bound to be tradeoffs for numbers like that, but still. Wow!

 

[Jay Aristide]

(With the linaro optimized cm10 build (cookies & cream, which I didn't care for, at all), it consistently quads 6200+ @ 1.6GHz. The GPU OC really improves overall performance, and is the only thing that stays OC'd. Even @ 1.3GHz w/SIO+interactive, it sticks between 5300 - 5500)

 

[breadnatty08]

Looks amazing Jay. I'm plenty happy with how mine is set up, but always looking to see what I can squeeze out of it.

 

[Jay Aristide]

Here's how you do this:

1) Update to 4.1.1
2) Install CWM and busybox(if you don't already have them. Make sure to run the busybox installer and actually install busybox. The script won't work without it)
3) Go here, download the 1.0.5b w/ramdisk and the 1.0.6 any kernel w/GPU of. Put them both in /storage/sdcard0
4) Reboot into CWM and flash the 1.0.5b then immediately flash the 1.0.6b
5) Reboot into JB, remount /system rw, and create /system/etc/init.d
6) Create a file in /system/etc/init.d/ called S90Speedtweaks and chmod it rwxrwxrwx
7} Edit it as follows (this script does NOT check to see if it executed properly, and assumes busybox (REQUIRED) is installed in /system/xbin (modify as necessary)):

#/system/bin/sh

mount -o remount,noauto_da_alloc /data /data
echo $((100*1024*1024)) > /sys/block/zram0/disksize
/system/xbin/busybox mkswap /dev/block/zram0
/system/xbin/busybox swapon /dev/block/zram0

Make sure to leave a trailing blank line in the file

8) reboot your device
9) Fire up your favorite CPU program and set 1.6GHz w/SIO+Performance
10) Profit/consume butter

(Feel free to try later kernels to taste, I got off the train at 1.0.6 (and you really need to install 1.0.5 first if your ROM doesn't come out of the box with init.d support. If it does, skip flashing 1.0.5))

 

[Deleted User]

Anyone get any benchmarks without customizations, stock everything?
I'd also like to see how it compares to the galaxy S3

 

[Jay Aristide]

Out of the box, comes in *just* under the One-X, with 4.1.1, *just* over it. The real performance boost seems to come from remounting /data.. I/O throughput easily quadruples

 

[stridermt2k]

Anyone get any benchmarks without customizations, stock everything?
I'd also like to see how it compares to the galaxy S3

Here's mine, actually is different from the first ones posted. My bad sorry!

I am running Build number JRO03D

 

[Jay Aristide]

Running stock 4.1.1 with _motley's latest linaro-optimized kernel (1.1.1) OC'd to 1.6GHz (GPU OC'd to 520MHz) w/init.d support, performance governor, _motley's optimized deadline scheduler, undervolted by 50mV, /data remounted with noauto_da_alloc, and a 512MB zRAM.

When not doing benchmarks, I run at 1.3GHz with interactive governor and deadline scheduler. With the undervolt, there's VERY LITTLE heat, even while gaming...

This thing just keeps getting better and better ...or, maybe I should say butter and butter