• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root I think i have bricked my phone :(

I am sure sp flash tool will recognize... Just try again... Manipulates the cable insert tym to phone... I did faced same problem... Flushing is the only solution...
 
shreymehrotra said:
I had already rooted my phone and was using UB-1. For trying jetmod updated the recovery to cwm 5 by varun. Everything was fine but as soon as i switched off the phone there is no display even while charging and the phone doesn't switch on. Need Help...:confused:
Click to expand...


Me too having the Same Problem...

Really I am in a great trouble..

Varun Please tell us what to do...:(



I was Also rooted my phone with UB-1 by ninand then after i flashed recovery.img by Varun Chitre.. It was all ok I reboot my phone into recovery it was also fine...

After i Flashed JetMOD 3.0 then flashed file manager then clicked reboot..

After it was terrible my phone was not at all booting..

Some observations i got are..
1) No display of Charging or USB when connected..
2) No Display Working anymore
3) I Removed battery as u said but didnt worked
4) I Tried flashing using Flashtool but it dont recognise the USB..

Please anyone help me..:(:(
I Flashed so many roms on different android phone but uptil now such case never come to me...

I am really worried a lot...

Please help me...:(:(:(:(:(:(:(
 
varun.chitre15 said:
OMG!!
This is 3rd bricking case
Try removing battery and keep it out for 15 mins and put back and see if it starts.
I hope you followed correct procedure
Click to expand...

Varun its Not Working...
I Tried it Several Times...
But not working At all..

Its not at all booting I Think its a problem of Boot.img Please do correct if i am wrong..

Please i am really in a big trouble..

Please help me:(:(..
 
shreymehrotra said:
have removed battery and tried starting it again.. tried sp tool also... nothing worked...
anything else that could help...
i just tried cwm by changing recovery in sp flash tool.. everything worked fine till there and i also got into recovery mode.. but after that when i switched off its not getting switched on again... sp flash tool is not able to recognize the device...

out of the other two guys who bricked their phone do you have any idea whether they are able to find out any solution yet.. mine is hard bricked as i am not getting any display or light in keypad while switching it on :-( (correct me if i am wrong)
Click to expand...


Me too having Exactly same Problem...

Please did u find some solution for it..

Please if u find do inform others as i am also facing the problems like u...

Please anybody help me...:(:(:(
 
rahulhnair said:
Keep the battery out; connect the phone to the computer.

Run SP flash tool.

When the computer starts searching for your phone (for flashing), insert the battery.

Hope this solves.
Click to expand...


I also did this but Not Worked for me..

Do u have any other solution do share please...
 
saivignesh said:
I think this problem happens only when we flash that recovery.img with gionee files
not sure though
Click to expand...


I was did the same i flashed recovery.img with the gionee files..

But still many of the persons faced the problems from UB-1 rom too..

Please help us...

Did someone approached to Service center for similar problem...

Did someone get any solution for This..

Please help us...:(:(:(
 
kumar abhishek said:
I flashed with mmx scatter file and ticked only recovery and after opening recovery I cleared dalvik cache and battery stats and restarted and surprisingly it was dead. I visited service center and they changed its motherboard (in 1day mmx very quick these days :D)
Click to expand...


I wanted to know what micromax chrged u for Replacement of motherboard...

Please reply as i am aslo facing the same problem..:(:(:(
 
THIS IS FOR PEOPLE WHO BRICKED THEIR A75
Did you guys do factory reset before flashing the ROM?

For those who didn't brick
Did you guys do a factory reset before flashing the ROM?
 
no I didn't do any factory reset
@varun but as I said I also bricked my phone after recovery but sp tools detected my phone and I reflashed
 
varun.chitre15 said:
THIS IS FOR PEOPLE WHO BRICKED THEIR A75
Did you guys do factory reset before flashing the ROM?

For those who didn't brick
Did you guys do a factory reset before flashing the ROM?
Click to expand...

I was facing problem that i was not able to do factory reset nor could get into recovery mode(since last few days) :(.. So thought of flashing it again.. Was going for Jet but couldn't even get to that step and bricked after changing recovery to CWM :confused::confused:

I would like to know that whether JIG works for hard bricked phones??:confused::confused:
 
shreymehrotra said:
ohhhh great then i think that i'll also have to visit darn service center.. No other option :-(
Anyone having any idea which service center i should visit in chennai (am new to chennai and living in outskirts) :-(
Click to expand...


you need to visit celltech which is near Alsa Mall - Egmore
 
Hello friends,
I am also facing the same problem as above
I rooted my phone A-75, installed UB1 and then UB-2. I was very happy with the performance of this device and then I thought to install recovery by varun. Recovery was installed but after I tried to reboot the phone nothing happned. MY A-75 GOT BRICKED:D.

Now, Once again I am here seeking help on how to recover the phone.

I tried SP flash tool but nothing is happening.

I have a very basic knowledge of computers

It will be of a great help if anybody step by step explain if there is any way of recovering from a brick.

If anything worked then fine otherwise I have to go to service centre

I being a very lazy guy, it is difficult for me to go to service centre

I appreciate any help from this great forum

looking for a posive response from you all guys. PLEASE HELP:mad:

How to unbrick A75 if bricked using recovery....Credits to pkotenetwork is of no use to me. I tried to use it but sp flash tool does not do anything
 
Vinod10479 said:
If anything worked then fine otherwise I have to go to service centre

I being a very lazy guy, it is difficult for me to go to service centre
Click to expand...

Buddy....you are contradicting yourself!! :p

As of now.....no other method has been DISCOVERED to unbrick the A75....besides the one posted already using SP flash tool.

You gotta go to the svc :)
 
Amarghy said:
Buddy....you are contradicting yourself!! :p

As of now.....no other method has been DISCOVERED to unbrick the A75....besides the one posted already using SP flash tool.

You gotta go to the svc :)
Click to expand...

Thanks bro. Going to SVC is the last option for me (because i am lazy:))

I will try SP flash tool in the coming 3 to 4 days and if nothing happens go the SVC
In Delhi they have different type of SVC like for normal phones and for android or the SUPERFone. So I have to look for the SVC which can do the need ful.

Still THANK YOU FOR YOUR PROMPT REPLY
At least I know what I have to do now. GOD BLESS YOU:)
 
try sp flashtool and flashing and thic preloader. it's work at me when brick my phone after flasing new baseband mmx a75. try it :)
 
gta said:
post ur problem on [ forum . china - iphone . ru ] . guys over there says mediatek software / hardware is impossible to kill .
EDIT : maybe ur battery is dead . try getting a new battery . :P hope this option works .
Click to expand...

plz help..!! i flashed my a75 with the sp flash tools.. flashing completed successfully.. bt when i switch on my fone only a white screen appears!!:(:( wht sud i do nw..??
 
You must log in or register to reply here.
Back
Top Bottom