• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

So when I lower my Slot Cycle #

J

Jshizzy

Well-Known Member
it makes my battery usage worse. What if I raise it to max 7? Will I see a battery boost, or what problems might I come across? I am going to set mine at 7 and I will update if I see any differences.
 
Jshizzy said:
it makes my battery usage worse. What if I raise it to max 7? Will I see a battery boost, or what problems might I come across? I am going to set mine at 7 and I will update if I see any differences.
Click to expand...

The difference will be seen, actually heard, by callers to your Eris in the increased number of rings it takes before being answered by you. The lower the number the more "busy" your device is polling towers for calls, thus the increase in battery usage.

The towers are polled by the device at increments proportional to the slot cycle setting, although not exact in seconds. A setting above 2 will result in quite a wait for callers.

Mine is set at 1, yielding a few seconds before I hear the first ring of a caller.

Slot cycle setting increments are: 0=1.28 seconds, 1=2.56 seconds, 2=5.12 seconds. If you do the math you'll see that a setting of 7 would likely cause any caller to hang up in frustration before you even heard the first ring.
 
I had to lower mine to 0. I kept missing too many phone calls at 2. I would get maybe one or two rings on my phone before it either took them to voice mail or they just hung up.
 
Kevkelsar said:
I had to lower mine to 0. I kept missing too many phone calls at 2. I would get maybe one or two rings on my phone before it either took them to voice mail or they just hung up.
Click to expand...

The slot cycle setting is not the only factor in how many rings a caller hears before the device signals a call to the user.

Proximity (distance) to the tower is another influence, as are weather movements and structures between the device and the tower.

The first "rings" might not be getting to your device because of those things from time to time; it can vary greatly, even with only slight wind changes.

Cell tower signals are relatively weak signals. Sometimes people blame their phones or the carrier; often they are mistaken.
 
Thanks Frisco for the quick reply and breakdown. I now have my slot set at 0 because I have noticed my phone rings around 2 times before it goes to voicemail, missing most calls. (Previously set at 2)

I guess I will stick with moderate battery drain, until Friday when I can order my 3500 battery. I have looked but I have not found anything bad about them. (Other than the extra bulk, but I feel like I will not mind that)
 
How do I change the slot? I live in a rural area and since moving here, I miss calls more often. I know distance is an issue but I might as well max the probability of hear the call.
 
Jshizzy said:
Thanks Frisco for the quick reply and breakdown. I now have my slot set at 0 because I have noticed my phone rings around 2 times before it goes to voicemail, missing most calls. (Previously set at 2)

I guess I will stick with moderate battery drain, until Friday when I can order my 3500 battery. I have looked but I have not found anything bad about them. (Other than the extra bulk, but I feel like I will not mind that)
Click to expand...

You're welcome.

That big battery will make quite the noticeable difference, and the slot being set at 0 will be well-tolerated, I'm sure.
 
ryan820 said:
How do I change the slot? I live in a rural area and since moving here, I miss calls more often. I know distance is an issue but I might as well max the probability of hear the call.
Click to expand...


Dial ##778 then press CALL

Choose Edit mode

Type in password 000000 press OK

Go down to Modem Settings, select it.

Slot Cycle is at the top. Go into it and set to desired number.

When done, press MENU and pressCommit Modifications.

Phone will reboot after 10 seconds.

Good to go.
 
Yes. A lot of people forget the:

"When done, press MENU and press Commit Modifications"

and the new settings are not invoked.
 
Oh. mah. gah. THIS is how I accidentally added my parents and home as emergency contacts! It's not in the *#*#PROGRAM#*#* menu, but it's certainly in this one.
 
Jshizzy said:
Dial ##778 then press CALL

Choose Edit mode

Type in password 000000 press OK

Go down to Modem Settings, select it.

Slot Cycle is at the top. Go into it and set to desired number.

When done, press MENU and pressCommit Modifications.

Phone will reboot after 10 seconds.

Good to go.
Click to expand...

Thank you so much. No way I would have guessed it was done this way! Mine was set to 2 and I brought it down to 1. Now I wait :oD

Thanks again!
 
I noticed a significant decrease in battery performance when I switched my slot cycle to 0. I have since bumped it back to 2.
 
Question, once u do the Slot cycle setting, u just do it once or u will have to re-do it everry time u flash a new ROM? , if ure rooted that is
 
homeeconomicalengineer said:
I have tried this and nothing happens after I dial ##778 (i do not have call confirm) I'm rooted with EE.0 Thanks in advance.
Click to expand...

Apparently that feature has been removed from EE 3.0. I had to restore PlainJane back, and then I was able to do this, and since I did a nand backup of my EE3, I just simply restored it afterwards.

and yes, it does remain in place when you switch ROMs
 
Hypo Luxa said:
Apparently that feature has been removed from EE 3.0. I had to restore PlainJane back, and then I was able to do this, and since I did a nand backup of my EE3, I just simply restored it afterwards.

and yes, it does remain in place when you switch ROMs
Click to expand...

EE is Sprint Hero based, and I believe that Sprint's programming menu requires an extra # after the #778. So, ##778#. I think...

lukesdiesel said:
Can't do this CELB Froyo 1.9
Click to expand...

The vanilla Cyanogen ROMs do not seem to support the HTC programming dial commands, so Flash Ivan's or Plain Jane to program, then flash back to the ROM of your choice.
 
You must log in or register to reply here.
Back
Top Bottom