• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [International] Galaxy s4 (19505-XX) wont boot after installing twrp

Sahar10501

Sahar10501

Newbie
Well, im new for this forums and wanted to say hi, hi
smile.gif


Ive installed twrp recovery from the app, its downloaded + installed everything was okay and after the instlaling finshed its asked me to reboot my phone, i rebooted my phone and not im getting into a screen thats says
"RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery"

My phone wont boot and odin dont even notice the phone and my pc doesnt either WHAT IM GONNA DO?!?!?


Thanks :3
 
Sahar10501 said:
Well, im new for this forums and wanted to say hi, hi
smile.gif


Ive installed twrp recovery from the app, its downloaded + installed everything was okay and after the instlaling finshed its asked me to reboot my phone, i rebooted my phone and not im getting into a screen thats says
"RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery"

My phone wont boot and odin dont even notice the phone and my pc doesnt either WHAT IM GONNA DO?!?!?


Thanks :3
Click to expand...

Hello and welcome to Android Forums Sahar10501 :)

Sorry to hear that you are having problems.

Can you post which method you used to root your GT-i9505, prior to installing the TWRP app and attempting to change to a custom recovery?
 
ironass said:
Hello and welcome to Android Forums Sahar10501 :)

Sorry to hear that you are having problems.

Can you post which method you used to root your GT-i9505, prior to installing the TWRP app and attempting to change to a custom recovery?
Click to expand...
Towel root
 
Sahar10501 said:
Well, im new for this forums and wanted to say hi, hi
smile.gif


Ive installed twrp recovery from the app, its downloaded + installed everything was okay and after the instlaling finshed its asked me to reboot my phone, i rebooted my phone and not im getting into a screen thats says
"RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery"

My phone wont boot and odin dont even notice the phone and my pc doesnt either WHAT IM GONNA DO?!?!?


Thanks :3
Click to expand...

Sounds like you installed the rogue 2.8.5.0
Install 2.8.4.0, or Philz and you will be fine
 
ironass said:
The exploit has been closed off for about 8 or 9 months. Are you able to boot into Download Mode?
Click to expand...
ive manged to boot up my phone normally and everything is okay i checked with root checker and my phone is rooted and its rebooting okay but when i want to go into recovery mode its shows this anoying message i mentioned above0
 
Sahar10501 said:
ive manged to boot up my phone normally and everything is okay i checked with root checker and my phone is rooted and its rebooting okay but when i want to go into recovery mode its shows this anoying message i mentioned above0
Click to expand...

If we can now discount TowelRoot rooting as being the problem, I would suggest installing TWRP via Odin and use .tar file for TWRP 2.8.4.0 from here...

http://techerrata.com/browse/twrp2/jfltexx

as my apprentice, Hawker, mentioned. See how you get on with that, first.
 
ironass said:
If we can now discount TowelRoot rooting as being the problem, I would suggest installing TWRP via Odin and use .tar file for TWRP 2.8.4.0 from here...

http://techerrata.com/browse/twrp2/jfltexx

as my apprentice, Hawker, mentioned. See how you get on with that, first.
Click to expand...
It failed while installing.

Code: 
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.



And now when i start my phone its says "Firmware upgrade encounterd an issue. please select recovery mode in Kies & try again" what now?
 
Sahar10501 said:
It failed while installing.

Code: 
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.



And now when i start my phone its says "Firmware upgrade encounterd an issue. please select recovery mode in Kies & try again" what now?
Click to expand...

OK... PLAN B.

Re-root your phone using the instructions in Rooting Galaxy S4 - Dummies Guide. Check that you have rooted successfully and then try flashing TWRP via Odin again.
 
Sahar10501 said:
But my phone got bricked isnt it?
Click to expand...

Your phone is, "bricked", if it will not power on and usually indicates a fried motherboard. You may need to download the stock Samsung firmware for your model of phone and CSC code, as per the instructions an links in #1.5 of
29 Galaxy S4 models - know yours?
You can then re-root it using Download mode and the guide I mentioned previously. This will get you to a known, good, rooted configuration again. You should also install the PhilZ recovery that is mentioned in that guide and take a nandroid backup before attempting to install TWRP again.
 
ironass said:
Your phone is, "bricked", if it will not power on and usually indicates a fried motherboard. You may need to download the stock Samsung firmware for your model of phone and CSC code, as per the instructions an links in #1.5 of
29 Galaxy S4 models - know yours?
You can then re-root it using Download mode and the guide I mentioned previously. This will get you to a known, good, rooted configuration again. You should also install the PhilZ recovery that is mentioned in that guide and take a nandroid backup before attempting to install TWRP again.
Click to expand...
Okay so now i just re-root my phone and see whats heppens right?
*/ edit = im just gonna download a new firmware and then root it through odin.
 
Last edited:
ironass said:
Your phone is, "bricked", if it will not power on and usually indicates a fried motherboard. You may need to download the stock Samsung firmware for your model of phone and CSC code, as per the instructions an links in #1.5 of
29 Galaxy S4 models - know yours?
You can then re-root it using Download mode and the guide I mentioned previously. This will get you to a known, good, rooted configuration again. You should also install the PhilZ recovery that is mentioned in that guide and take a nandroid backup before attempting to install TWRP again.
Click to expand...
Code: 
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNK4_I9505OXAGNK4_I9505XXUGNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)



I cannot even install the firmware from sammobile
 
Sahar10501 said:
Code: 
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNK4_I9505OXAGNK4_I9505XXUGNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)



I cannot even install the firmware from sammobile
Click to expand...

How odd! You are, I take it, in Germany and on CSC code DBT? Have you now, or in the past, tried to re-partition your .PIT file in Odin? This, as a matter of course, should be left unchecked.
 
ironass said:
How odd! You are, I take it, in Germany and on CSC code DBT? Have you now, or in the past, tried to re-partition your .PIT file in Odin? This, as a matter of course, should be left unchecked.
Click to expand...
Never re-parition it.
Does that mean i need to buy a new phone? :(
 
You didn't get this PIT error after flashing recovery initially, but this seemed to have started the PIT issue. Are you SURE the recovery you flashed was the correct one for your specific device?
You may have to re-flash the PIT partition, but before doing so, try the following:
Are you using the original USB cable? If not, do so.
Also try another USB port.
What version of Odin are you using? 3.09 is the "latest" but it if you are already on this, then it may be worth trying an older version (eg. 1.85 or 3.04)
 
Hawker said:
You didn't get this PIT error after flashing recovery initially, but this seemed to have started the PIT issue. Are you SURE the recovery you flashed was the correct one for your specific device?
You may have to re-flash the PIT partition, but before doing so, try the following:
Are you using the original USB cable? If not, do so.
Also try another USB port.
What version of Odin are you using? 3.09 is the "latest" but it if you are already on this, then it may be worth trying an older version (eg. 1.85 or 3.04)
Click to expand...
ironass said:
Have you tried a Factory Data Reset in Recovery Mode?
Click to expand...

And hawker i used 3.10 i downloaded the 3.09 changed usb port and its worked thankss :)

Well, my phone is up and running thanks for you both :), Now ill root my phone - using Ironass guide and install twrp through the link ironass gave me and see what will heppen :)
 
You must log in or register to reply here.
Back
Top Bottom