kyleforleforde
Lurker
I'm still having issues with ics and not getting past a pulsing vp logo any ideas anyone it's an A9 motherboard from dealextreme?
-
After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
Android 2.3 & 4.0 WiFi Internet HD 1080P HDMI Google TV Box ARM Cortex A9 Firmware
- Thread starter unknown26
- Start date
You did not provide details about device..
Manufacture, model, ref board... what version of fw did you installed ?
please be more specific..
Stane request:
Stane, would you consider a touch up on existing visson software vs. your independent firmware? I tried the 4022 for rev 1 today and it fixed a couple problems but did not fix one I was looking for and added one new one.
Bluetooth still not working + Now I get choppy audio in some apps (ac3?). If you could add your fixes to these this unit would be doing everything I'm looking for.
PS
I tried yours first but had problems getting it to boot, screen sizing issues, also no Bluetooth.
Bluetooth still not working + Now I get choppy audio in some apps (ac3?). If you could add your fixes to these this unit would be doing everything I'm looking for.
PS
I tried yours first but had problems getting it to boot, screen sizing issues, also no Bluetooth.
kyleforleforde
Lurker
Hi there my bad the fw I installed was rev 1 off stanes vplay download section latest version. Now I have successfully installed ICS only once before but it had a few problems and had to revert back to 2.3.
I have tried iinstalling a few times now but still get pulsing vplay logo and no further in boot. Device I have is here http://m.dealextreme.com/p/android-full-hd-1080p-media-player-w-usb-sd-hdmi-rj45-ports-black-2-x-aaa-102992
I would say it is not Visson's product...correct me if I'm wrong... firmware you downloaded from vplay download section is for Visson hardware.
where did you download that fw?
I have this Google TV Box Android 4.0 ARM Cortex A9 WiFi HD 1080P HDMI Internet TV Box with Remote DDR III 512M 4GB ram, 3 usb black boX/ Vission 2. Purchased from ebay from TOMTOP.
I am having issues with wifi connection, when I try to connect to my router it takes the password but keeps cycling/looping and then disconnects saying connection is too weak. But I do have roku box and another android box which connects well, I have tested it with N router and a legacy G router, the router is bearly 20 feet away. Every thing works well except it is not connecting to the WIFI. Can any one help. I am running Android 4 with the official firmware released on 6/29 i believe.
Is it possible to disable the internal inbuilt wifi and use a USB wifi instead?
Vissiontech MBX 2.0 Board
Android ver: 4.04
Kernel: 3.08
Build: ICS.MBX.20120629
I am having issues with wifi connection, when I try to connect to my router it takes the password but keeps cycling/looping and then disconnects saying connection is too weak. But I do have roku box and another android box which connects well, I have tested it with N router and a legacy G router, the router is bearly 20 feet away. Every thing works well except it is not connecting to the WIFI. Can any one help. I am running Android 4 with the official firmware released on 6/29 i believe.
Is it possible to disable the internal inbuilt wifi and use a USB wifi instead?
Vissiontech MBX 2.0 Board
Android ver: 4.04
Kernel: 3.08
Build: ICS.MBX.20120629
rhymeswith
Newbie
I realize this is an ATV-101/108 but I was wondering if anyone has tried the fw on the main page of this thread: Android 4.0.4 - Google Android 4.0 ARM Cortex A9 1GHz WiFi HD 1080P HDMI Internet TV Box Black Latest Version (c03ref)
http://www.mediafire.com/?yicjsuik2bvclqn
on the following unit: GV-12 AML8726 Android 2.34 TV Box 1080P HDMI OUT Flash 10.2
I ran the device check.apk and it reported:
MBX DVBT reference board (c03ref)
Board: MBX
Name: c03ref
Device: c03ref
Board: c03ref
I'm having terrible video playback issues and wondering if this fw might be a possible solution. I hope I'm not asking an inane question - if so, please let me know. Appreciate any help anyone can offer.
http://www.mediafire.com/?yicjsuik2bvclqn
on the following unit: GV-12 AML8726 Android 2.34 TV Box 1080P HDMI OUT Flash 10.2
I ran the device check.apk and it reported:
MBX DVBT reference board (c03ref)
Board: MBX
Name: c03ref
Device: c03ref
Board: c03ref
I'm having terrible video playback issues and wondering if this fw might be a possible solution. I hope I'm not asking an inane question - if so, please let me know. Appreciate any help anyone can offer.
I can't answer your question but this looks to be a geniatech manufactured box so lots of firmwares available for this box - several rebadged/re cased models - pivos xios, sumvision NANO 1 (and NANO 1 slim and slim+).
Have a read of this post: http://forum.xbmc.org/showthread.php?tid=136114&pid=1148819#pid1148819
Lots of talk on these boxes as XBMC soon to be released for Android and this 'type' of box (the pivos xios) seems to be the developers only tested platform (but be aware that differences may exist between them due to codec licensing etc).
Cheers
rhymeswith
Newbie
I appreciate your comments and read the post you suggested. I see the specs are similar. Perhaps I could elaborate on this problem. I received the box and noticed immediately an audio/video sync problem, not to mention the video was clipping and generally lacking smoothness. I switched out HDMI cables, Tv ports, multiple video players, and different media sources but the problem remained very consistent. I then reflashed the ICS with this:
DVR VOD By URAKU
The T1 unit being an exact copy of my own. The flash went fine. Some small changes are evident, but the video problem remains the same. Is the problem therefore in the FW of the unit, or is this a hardware issue? Any thoughts?
@rhymeswith
Really depends on what you are trying to play - your rips may be beyond the capabilities of this box. Have you tried lower spec rips and still get the issue?
Might also be worth going back into recovery and doing a factory reset (which will wipe all user installed apps and settings) - so revert to a clean out the box ICS setup.
Really depends on what you are trying to play - your rips may be beyond the capabilities of this box. Have you tried lower spec rips and still get the issue?
Might also be worth going back into recovery and doing a factory reset (which will wipe all user installed apps and settings) - so revert to a clean out the box ICS setup.
rhymeswith
Newbie
Tried the factory reset. Tried multiple rips. Tried AVI/Mp4 you name it. They all perform poorly and with lose of audio sync. I have a Cruz pad with Android and it plays everything flawlessly, so I know it isn't the rips. This is why this problem is so terribly frustrating.
One quick note, my rev 1 box does not seem to do any handshaking with the monitor. So if a firmware sets the android box to something your tv can't do... it will seem like the box is fried. I had to hook mine up to another monitor to set my unit to something my TV could use....
Will try using a monitor instead of my tv... perhaps also a good idea to use component video instead of hdmi.
Several weeks now with bricked unit...
I bought the same Tv Box as Monicaz, and i had some problems with the wifi (it connects for a few seconds, than drops the connection), so i have upgraded with the latest firmware in v-play, now i cant even start the wifi. I have contacted the seller (TOMTOP) and they gave me another firmware to install, but the same problem remains. Can anyone help me?
megoder
Newbie
lets play to V.play from Russia.(bad english)
model same as pic but xxxxxxxHDMI_v3 andro 2.3.4 in box
device ckeck
MBX DVBT reference board (c03ref)
Board: MBX
Name: c03ref
Device: c03ref
Board: c03ref
2. first i make RECOVERY SD with sdtool/ SD=2 Gb no HC full size
a. 1lol after "make sd" is FS = RAW not FAT!!!
files still copied to sd(in root 7 files from 4.0.4 6/21 c03ref zip).
b. push reset-power-wait to glich on screen-reset off- see andro witch spinnig cube- moving progress bar 100%- !!!!
recovery log error Ent MAC no efuse.
restart
flash again same error.
flash again same error.
OK change route
new SD 4 GB microSDHC +SD adaptor
no SDTOOL! FS= FAT32
in root 7 files from 4.0.4 6/21 c03ref zip).
b. push reset-power-wait to glich on screen-reset off- see andro witch spinnig cube- moving progress bar 100%- !!!!
recovery log error Ent MAC no efuse.
restart
flash again same error.
flash again same error.
in recovery select "apply update" use new_patch.zip
..... update no errors/
restart ALL WORK !!!
MAC no view is here or not? enh connection work 100% DHCP&Static.
check all SD u have anyone may work!
3. need use of etc/remote.conf instead of kernel to use RF (i have old r.c from2.3.4)
change to old witch no effect (on\off only)/
________________________________________
TIME SYNC in andro 5 min after boot.(first check eventually failed)
in my case timesync in 27 sec after launcher starts not 5 mins.
Stane tell me price for beer u drink :0
Great JOB!
feedback:
1. at 4.0.4 cpu at 750 all time (SystemPanel_1.1.1.apk) in 2.3.4 jumps 200-750/
CPU master show 300-750 (widget show always 750). i use 80mm cooler instead of a top cover
temp sensor show 0(C) degree
2. 1080p work until reboot, after that all screen zoomed upper left quarter of screen.
3. i update Superuser from market & install latest BusyBox all fine no bugs/
4. overall boot time 2x longer than 2.3.4
5. if u need some logs\dumps\screens just ask!
1. device android-full-hd-1080p-media-player-w-usb-sd-hdmi-rj45-ports-black-sku-102992 its similar to ATV-108 (c03ref) arrived 21/07/2012
model same as pic but xxxxxxxHDMI_v3 andro 2.3.4 in box
device ckeck
MBX DVBT reference board (c03ref)
Board: MBX
Name: c03ref
Device: c03ref
Board: c03ref
2. first i make RECOVERY SD with sdtool/ SD=2 Gb no HC full size
a. 1lol after "make sd" is FS = RAW not FAT!!!
files still copied to sd(in root 7 files from 4.0.4 6/21 c03ref zip).
b. push reset-power-wait to glich on screen-reset off- see andro witch spinnig cube- moving progress bar 100%- !!!!
recovery log error Ent MAC no efuse.
restart
flash again same error.
flash again same error.
OK change route
new SD 4 GB microSDHC +SD adaptor
no SDTOOL! FS= FAT32
in root 7 files from 4.0.4 6/21 c03ref zip).
b. push reset-power-wait to glich on screen-reset off- see andro witch spinnig cube- moving progress bar 100%- !!!!
recovery log error Ent MAC no efuse.
restart
flash again same error.
flash again same error.
in recovery select "apply update" use new_patch.zip
..... update no errors/
restart ALL WORK !!!
MAC no view is here or not? enh connection work 100% DHCP&Static.
check all SD u have anyone may work!
3. need use of etc/remote.conf instead of kernel to use RF (i have old r.c from2.3.4)
change to old witch no effect (on\off only)/
________________________________________
TIME SYNC in andro 5 min after boot.(first check eventually failed)
in my case timesync in 27 sec after launcher starts not 5 mins.
Stane tell me price for beer u drink :0
Great JOB!
feedback:
1. at 4.0.4 cpu at 750 all time (SystemPanel_1.1.1.apk) in 2.3.4 jumps 200-750/
CPU master show 300-750 (widget show always 750). i use 80mm cooler instead of a top cover
temp sensor show 0(C) degree
2. 1080p work until reboot, after that all screen zoomed upper left quarter of screen.
3. i update Superuser from market & install latest BusyBox all fine no bugs/
4. overall boot time 2x longer than 2.3.4
5. if u need some logs\dumps\screens just ask!
megoder
Newbie
use 256-1 GB SD format to FAT32
unzip 7 files from latest f16ref FW to root of SD
safely remove SD
on BOX set HDMI RES 720p
turn off insert SD
push down RESET insert power cord
after 10 sec release reset
wait wait
in recovery select wipe data \ wipe cache
unplug power & SD
turnon device
thats all
in case of errors use SDtool recovery boot.
Stane tell me price for beer u drink :0
Great JOB!
feedback:
1. at 4.0.4 cpu at 750 all time (SystemPanel_1.1.1.apk) in 2.3.4 jumps 200-750/
CPU master show 300-750 (widget show always 750). i use 80mm cooler instead of a top cover
temp sensor show 0(C) degree
2. 1080p work until reboot, after that all screen zoomed upper left quarter of screen.
3. i update Superuser from market & install latest BusyBox all fine no bugs/
4. overall boot time 2x longer than 2.3.4
5. if u need some logs\dumps\screens just ask!
Hi and welcome to forums!
About beers, it's up to you
Answers:
1. CPU governor is set on performance in this version of kernel. Will be changed to ondemand with next release of firmware. Just a comment, I ran movies for whole night (literally) on ATV-108 c03ref without any cooler without problems, it wasn't hot or anything like that
2. I'm aware of 1080 bug and will be fixed with next firmware
3. I do not advise to install newer versions of busybox, but if it works for you go for it....
4. ICS is much bigger and needs more resources than 2.3.4 and that's why it takes so long to boot.
5. If I will need any will ask, don't worry
About IR, aware of that too, will be fixed in next firmware.
Hi Stane,
great job on the modified firmware. i have a c03ref device. i'm loving it except for the few known quirks already mentioned above! waiting for the next update.
can i just ask if you're going to release a firmware with usb audio anytime soon? because of the lack of speaker out on my device, and i want to run the device headless, usb audio is the only solution i can think of.
great job on the modified firmware. i have a c03ref device. i'm loving it except for the few known quirks already mentioned above! waiting for the next update.
can i just ask if you're going to release a firmware with usb audio anytime soon? because of the lack of speaker out on my device, and i want to run the device headless, usb audio is the only solution i can think of.