• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Apps2SD

A

anr311

Newbie
Is there an EASY start to finish tutorial out there?

Everything I found is for a specific ROM (I have XTRROM3) and looks really complicated.

My phone is showing the low memory icon and it's really annoying, so I'd like to get this figured out. :)

Thanks!
 
copied this From the xtrrom site.. this is actually really easy. After backing up your sd card, this will take you a minute


Prerequisites

1. If you have not setup your SD card (for those new to Apps2sd):
BACKUP YOUR SD CARD TO YOUR COMPUTER. Can't stress this enough, as partitioning will wipe the entire card.

2. Reboot into recovery

3. In Android System Recovery, select Partition sdcard

4. In the Partition sdcard menu, select Partition SD

5. Follow the instructions on the phone to partition your SD card. Most folks seem to recommend using the default values however you can go larger or smaller use values 256, 512,768,1024. You will also be asked to set a swap size; I stayed at 32mb (anticipate future ROM options to allow moving swap to sd)

6. Once the partition is initially created you must then convert to ext3 - In the Partition sdcard menu, select SD:ext2 to ext3. Follow the instructions on the screen.

7. Press the back button on the phone to go back to the main menu.

8. Your SD card is now ready to work with an Apps2sd supported ROM.
 
Hypo Luxa said:
copied this From the xtrrom site.. this is actually really easy. After backing up your sd card, this will take you a minute


Prerequisites

1. If you have not setup your SD card (for those new to Apps2sd):
BACKUP YOUR SD CARD TO YOUR COMPUTER. Can't stress this enough, as partitioning will wipe the entire card.

2. Reboot into recovery

3. In Android System Recovery, select Partition sdcard

4. In the Partition sdcard menu, select Partition SD

5. Follow the instructions on the phone to partition your SD card. Most folks seem to recommend using the default values however you can go larger or smaller use values 256, 512,768,1024. You will also be asked to set a swap size; I stayed at 32mb (anticipate future ROM options to allow moving swap to sd)

6. Once the partition is initially created you must then convert to ext3 - In the Partition sdcard menu, select SD:ext2 to ext3. Follow the instructions on the screen.

7. Press the back button on the phone to go back to the main menu.

8. Your SD card is now ready to work with an Apps2sd supported ROM.
Click to expand...

This is correct but the apps2sd may not be activated to put stuff on sd so to be sure after you do the above steps

Use sdk or the terminal app to activate it.

with sk have the command prompt point to the sdk tools folder then type:
adb shell
at the # prompt, type a2sd cachesd
it will now activate the a2sd file as well as move all apps to the sd card as well as install future apps to sd

witht the terminal app,
open the app
At the prompt type su
at the prompt type a2sd cachesd
it will now activate and move all apps to sd as well as install future apps to sd
 
Jrocker23 said:
This is correct but the apps2sd may not be activated to put stuff on sd so to be sure after you do the above steps

Use sdk or the terminal app to activate it.

with sk have the command prompt point to the sdk tools folder then type:
adb shell
at the # prompt, type a2sd cachesd
it will now activate the a2sd file as well as move all apps to the sd card as well as install future apps to sd

witht the terminal app,
open the app
At the prompt type su
at the prompt type a2sd cachesd
it will now activate and move all apps to sd as well as install future apps to sd
Click to expand...

I believe he can skip this step if he is using xtrrom3.. after setting up the sd card, he can simply flash the app2sdON and that will do the adb commands for him.

For any other rom however, this step would indeed be necessary
 
After you format your sd card, you can flash the apps2sdON and apps2sd will function as designed.

You might be interested in this thread that I started with some of the same questions.
 
pavirotten said:
After you format your sd card, you can flash the apps2sdON and apps2sd will function as designed.

You might be interested in this thread that I started with some of the same questions.
Click to expand...

Thanks!

I *think* it worked. My internal phone storage went from 21 mb to 132 mb.

Thanks again - I would never have thought to flash the other zip.
 
pavirotten said:
After you format your sd card, you can flash the apps2sdON and apps2sd will function as designed.

You might be interested in this thread that I started with some of the same questions.
Click to expand...

I believe the newest version does not require flashing zip files after installing the ROM. It has now a gscript utility to toggle features (see the ROM istruction on the OP.)

Peter
 
Question:
Before I partition the SD card I copy everything of the SD card to the PC for safekeeping.
Then I do the partitioning and flash the ROM.

At which point do I copy back the files/folders from the PC?
Before or after flashing the ROM?
Do I copy everything back into the SD root?

Peter
 
You must log in or register to reply here.
Back
Top Bottom