• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [Cyanogen6.1.3]gingerbread[v01] - Fully Camera Working!!!

Smoked said:
I'm on firmware 2.0.2.A.0.24, baseband 2.0.46(Eminence ROM) right now. Can I follow the instructions at the beginning of this thread or do I need to get onto something more standard first?

Thanks
Click to expand...

You just need:
1. Rooted phone
2. xRecovery installed
3. Follow instructions

;)
 
rendeiro2005 said:
You just need:
1. Rooted phone
2. xRecovery installed
3. Follow instructions

;)
Click to expand...

Excellent thanks. Been waiting for a 2.2 with working Camera...much appreciated!

Actually now that i'm at home and not behind a firewall I can see the big red text saying i need baseband 54,55 or 58 so I WILL have to flash that first. :)
 
Smoked said:
Excellent thanks. Been waiting for a 2.2 with working Camera...much appreciated!

Actually now that i'm at home and not behind a firewall I can see the big red text saying i need baseband 54,55 or 58 so I WILL have to flash that first. :)
Click to expand...

you can do all at once

right after rom installation, instead of reboot, prepair everything to flash with flashtool and when you`re donne reboot;)
 
rendeiro2005 said:
you can do all at once

right after rom installation, instead of reboot, prepair everything to flash with flashtool and when you`re donne reboot;)
Click to expand...

Turns out I can't do it tonight...so since i have time. Which baseband should I pick? With the current ROM i'm an x10i although being in Canada on Rogers the phone came as an x10a.
 
Great looking ROM but after installing and following all instructions, if does not see my OEM SD card.

XRecovery still works fine, and it can see the card, but when I boot the ROM, no SD card
:(

Fantastic Quadrant scores too, 1315 compared to 850 on 2.1!

Any help?

Thanks
A
 
Ascalon said:
Great looking ROM but after installing and following all instructions, if does not see my OEM SD card.

XRecovery still works fine, and it can see the card, but when I boot the ROM, no SD card
:(

Fantastic Quadrant scores too, 1315 compared to 850 on 2.1!

Any help?

Thanks
A
Click to expand...


did you have your sdcard partitioned? you can`t.

try to remove your sdcard from phone and insert on pc to see if it works
 
Did not consciously partition the SD card, I just left it as was from previous custom ROM installations. I had a version of 2.1 with JIT V2 and all worked OK.

I had installed Free X10 and wasn't mad about it. It could not see the SD card either. Then I installed this ROM and the same thing happens. It does not recopgnise the SD card at all.

I had plugged the SD card into the PC, when X10 was still on to copy the CM ROM onto it.

I used xRecovery to install the CM ROM and the camrcorder fix and all seemed OK, but after multiple reboots, there's no joy with the SD card.

A
 
Ascalon said:
Did not consciously partition the SD card, I just left it as was from previous custom ROM installations. I had a version of 2.1 with JIT V2 and all worked OK.

I had installed Free X10 and wasn't mad about it. It could not see the SD card either. Then I installed this ROM and the same thing happens. It does not recopgnise the SD card at all.

I had plugged the SD card into the PC, when X10 was still on to copy the CM ROM onto it.

I used xRecovery to install the CM ROM and the camrcorder fix and all seemed OK, but after multiple reboots, there's no joy with the SD card.

A
Click to expand...

strange:confused:

try to format your sdcard after a backup and then make a clean install
 
Did that, no joy. Three reboots after SD card format and compleate clean install of CM ROM, and still no SD card.

Thanks for your help,

A
 
Any update on this? Have tried two different SD cards now and still no joy.

This is a bit annoying because otherwise the ROM is excellent

A
 
nop :(
unfortunately you`re the only one who have that problem so i can`t determine what`s wrong:( here and on xda i don`t have any feedback like yours...
 
rendeiro2005 said:
nop :(
unfortunately you`re the only one who have that problem so i can`t determine what`s wrong:( here and on xda i don`t have any feedback like yours...
Click to expand...


Bugger!

OK, thanks for your help. Typical that I would be the exception!

Oh Well, back to 2.1 for me then!

A
 
this ROM looks excellent, easy to install, no looping issues.
However i no mobile signal, ive known this to be an issue in the past, but have never experienced it.

How can i resolve this??

Thanks
 
wynney666 said:
this ROM looks excellent, easy to install, no looping issues.
However i no mobile signal, ive known this to be an issue in the past, but have never experienced it.

How can i resolve this??

Thanks
Click to expand...

are you on the right baseband? it should work perfectly on 54 and above
 
rendeiro2005 said:
are you on the right baseband? it should work perfectly on 54 and above
Click to expand...

yes Baseband 54.
but i have fixed it

i was going to try this
xda-developers - View Single Post - CM 6.1.3 V4.4 no radio or wifi fix x10

But prior - i rolled back to previous rom, and re-installed This again, now it works.
Strange but atleast its working.
Thanks for the rapid reply tho

ONE THING THOUGH - I Have installed the Camcorder fix, but my Video Cam still doesnt work. any suggestions??
 
I am going to root and flash a buddies phone later this afternoon and install this great looking custom ROM on a buddies phone later this afternoon. But I have a question.

So that I don't have to go through trial and error, is there a specific version of xRecovery I have to have installed?

I am looking at this -

xRecovery v1.0.0 Installers for ALL roms - xda-developers

Do I use the one for 2.1 or 2.2 or the one for all...2.1/2.2/2/3?

And for me to install the 2.2....do I install 2.1, then apply the 2.2 hotfix?

I can't remember what I have loaded on my phone.
 
You must log in or register to reply here.
Back
Top Bottom