Root DRoidMaxxV3 NEW [ROM][STABLEDRoidMaxxV3 -2.2.1 (Codename Droidmax, released on 2011-10-24)

[varun.chitre15]

and also the crt effect.will u tell cool.gautam to try both i. e flash player and crt.

 

[ash1425]

best luck guyz... keep it up....

 

[cool.gautam]

Hey....
@all - one good news - i hacked a apk of flash and now 10.2 adobe flash player working on rom will give u link of that check at whatismyflashplayerversion.com

@sam- check d mail , wifi still not working everyrhing got fixed even cam,lag,market everything

 

[cool.gautam]

Sanrox. . .even sensors not worjing I will post down the catlog k?

 

[samrox144]

Ok....post it

 

[cool.gautam]

W/Process ( 1249): Unable to open /proc/1909/status
W/IInputConnectionWrapper( 1946): showStatusIcon on inactive InputConnection
W/webcore ( 1946): Can't get the viewWidth after the first layout
W/DrmStore( 1982): ******* WARNING, NOT FINISHED CODE ********
W/DrmStore( 1982): ******* WARNING, NOT FINISHED CODE ********
W/DrmStore( 1982): ******* WARNING, NOT FINISHED CODE ********
W/IInputConnectionWrapper( 1341): showStatusIcon on inactive InputConnection
W/AudioService( 1249): stream was not muted by this client
E/AudioService( 1249): Could not get client death handler for stream: 3
E/MediaPlayerService( 1243): The Default player that is returned is STAGEFRIGHT**************
E/OMX_Master_StageFright( 1243): Request to create component makeComponentInstance *************************** OMX.qcom.video.decoder.mpeg4
E/AudioPlayer( 1243): ***************AudioPlayer::start(
W/AudioHardwareMSM72XX( 1243): Mistake Same Device(Cur:0, New:2), Routing all the way ...
E/QCvdec ( 1243): profile_and_level_indication = 1
E/QCvdec ( 1243): video_object_type_indication = 1
E/QCvdec ( 1243): VLD in DSP flag = 1 set
E/QCvdec ( 1243): ERROR - VDL_Configure_HW: cannot open axi_freq -1
W/AudioFlinger( 1243): write blocked for 164 msecs, 3 delayed writes, thread 0xb858
W/TimedEventQueue( 1243): Event 1077 was not found in the queue, already cancelled?
W/AudioHardwareMSM72XX( 1243): Routing Audio to NULL Device, RETURN (CurPre: 2, CurNew: 0)
E/QCvdec ( 1243): Flush VDL_stats_q: stats_ptr 0x15b18
W/QCvdec ( 1243): ======================================================================
W/QCvdec ( 1243): Open Max Statistics
W/QCvdec ( 1243): ======================================================================
W/QCvdec ( 1243): empty this buffer rate = 30.315308
W/QCvdec ( 1243): empty this buffer total time = 10687670
W/QCvdec ( 1243): empty this buffer count = 324
W/QCvdec ( 1243): ======================================================================
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Arm Statistics
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Total number of frames decoded = 320
W/QCvdec ( 1243): Average Arm time/frame(ms) = 1.510178
W/QCvdec ( 1243): Frames Arm Decoded/sec = 662.173584
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Frame Done Statistics
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Frame done cumulative time = 10660542
W/QCvdec ( 1243): Frames Done per second = 29.923431
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Dsp Statistics
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Total number of frames decoded = 320
W/QCvdec ( 1243): Average Dsp time/frame(ms) = 18.264730
W/QCvdec ( 1243): Frames Dsp Decoded/sec) = 54.750328
W/QCvdec ( 1243): ===========================================================
W/AudioHardwareMSM72XX( 1243): Mistake Same Device(Cur:0, New:2), Routing all the way ...
W/AudioFlinger( 1243): write blocked for 170 msecs, 4 delayed writes, thread 0xb858
W/AudioHardwareMSM72XX( 1243): Routing Audio to NULL Device, RETURN (CurPre: 2, CurNew: 0)
W/AudioHardwareMSM72XX( 1243): Mistake Same Device(Cur:0, New:2), Routing all the way ...
W/AudioHardwareMSM72XX( 1243): Routing Audio to Same Device, RETURN, mCurOutDevice: 2
W/AudioHardwareMSM72XX( 1243): Routing Audio to Same Device, RETURN, mCurOutDevice: 2
W/AudioHardwareMSM72XX( 1243): Routing Audio to Same Device, RETURN, mCurOutDevice: 2
W/AudioHardwareMSM72XX( 1243): Routing Audio to Same Device, RETURN, mCurOutDevice: 2
W/AudioHardwareMSM72XX( 1243): Routing Audio to NULL Device, RETURN (CurPre: 2, CurNew: 0)
W/Process ( 1249): Unable to open /proc/1203/status
W/AudioHardwareMSM72XX( 1243): Mistake Same Device(Cur:0, New:2), Routing all the way ...
W/AudioHardwareMSM72XX( 1243): Routing Audio to NULL Device, RETURN (CurPre: 2, CurNew: 0)
W/IInputConnectionWrapper( 1341): showStatusIcon on inactive InputConnection
W/DrmStore( 2039): ******* WARNING, NOT FINISHED CODE ********
W/DrmStore( 2039): ******* WARNING, NOT FINISHED CODE ********
W/DrmStore( 2039): ******* WARNING, NOT FINISHED CODE ********
W/IInputConnectionWrapper( 1341): showStatusIcon on inactive InputConnection
W/AudioService( 1249): stream was not muted by this client
E/AudioService( 1249): Could not get client death handler for stream: 3
E/MediaPlayerService( 1243): The Default player that is returned is STAGEFRIGHT**************
E/OMX_Master_StageFright( 1243): Request to create component makeComponentInstance *************************** OMX.qcom.video.decoder.mpeg4
E/AudioPlayer( 1243): ***************AudioPlayer::start(
W/AudioHardwareMSM72XX( 1243): Mistake Same Device(Cur:0, New:2), Routing all the way ...
E/QCvdec ( 1243): profile_and_level_indication = 1
E/QCvdec ( 1243): video_object_type_indication = 1
E/QCvdec ( 1243): VLD in DSP flag = 1 set
E/QCvdec ( 1243): ERROR - VDL_Configure_HW: cannot open axi_freq -1
W/AudioFlinger( 1243): write blocked for 163 msecs, 5 delayed writes, thread 0xb858
W/TimedEventQueue( 1243): Event 1102 was not found in the queue, already cancelled?
W/AudioHardwareMSM72XX( 1243): Routing Audio to NULL Device, RETURN (CurPre: 2, CurNew: 0)
E/QCvdec ( 1243): Flush VDL_stats_q: stats_ptr 0xfe68
W/QCvdec ( 1243): ======================================================================
W/QCvdec ( 1243): Open Max Statistics
W/QCvdec ( 1243): ======================================================================
W/QCvdec ( 1243): empty this buffer rate = 30.337875
W/QCvdec ( 1243): empty this buffer total time = 11108227
W/QCvdec ( 1243): empty this buffer count = 337
W/QCvdec ( 1243): ======================================================================
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Arm Statistics
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Total number of frames decoded = 332
W/QCvdec ( 1243): Average Arm time/frame(ms) = 1.540139
W/QCvdec ( 1243): Frames Arm Decoded/sec = 649.292236
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Frame Done Statistics
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Frame done cumulative time = 11058361
W/QCvdec ( 1243): Frames Done per second = 29.932102
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Dsp Statistics
W/QCvdec ( 1243): ===========================================================
W/QCvdec ( 1243): Total number of frames decoded = 332
W/QCvdec ( 1243): Average Dsp time/frame(ms) = 18.369965
W/QCvdec ( 1243): Frames Dsp Decoded/sec) = 54.436687
W/QCvdec ( 1243): ===========================================================
W/Process ( 1249): Unable to open /proc/2021/status
W/AudioHardwareMSM72XX( 1243): Mistake Same Device(Cur:0, New:2), Routing all the way ...
W/AudioFlinger( 1243): write blocked for 167 msecs, 6 delayed writes, thread 0xb858
W/AudioHardwareMSM72XX( 1243): Routing Audio to NULL Device, RETURN (CurPre: 2, CurNew: 0)
W/AudioHardwareMSM72XX( 1243): Mistake Same Device(Cur:0, New:2), Routing all the way ...
W/AudioHardwareMSM72XX( 1243): Routing Audio to Same Device, RETURN, mCurOutDevice: 2
W/AudioHardwareMSM72XX( 1243): Routing Audio to Same Device, RETURN, mCurOutDevice: 2
W/AudioHardwareMSM72XX( 1243): Routing Audio to NULL Device, RETURN (CurPre: 2, CurNew: 0)
E/Sensors ( 1249): sensors_control_activate active=00000022 sensor=00000000 new_sensors=20 changed=2
E/Sensors ( 1249): enable_disable_gsensor sensors:0 mask 2
E/Sensors ( 1249): open_input name:7k_handset de->dname:event4 devname:/dev/input/event4 fd:96
E/Sensors ( 1249): open_input namesensor de->dname:event3 devname:/dev/input/event3 fd:96
E/Sensors ( 1249): open_input name:gsensor de->dname:event2 devname:/dev/input/event2 fd:97
E/Sensors ( 1249): open_input name:surf_keypad de->dname:event1 devname:/dev/input/event1 fd:100
E/Sensors ( 1249): open_input name:Focal touch de->dname:event0 devname:/dev/input/event0 fd:100
W/ResourceType( 1249): Invalid package identifier when getting bag for resource number 0x00000000
E/Sensors ( 1249): sensors_control_activate active=00000020 sensor=00000002 new_sensors=22 changed=2
E/Sensors ( 1249): enable_disable_gsensor sensors:2 mask 2
E/Sensors ( 1249): sensors_control_activate active=00000022 sensor=00000000 new_sensors=20 changed=2
E/Sensors ( 1249): enable_disable_gsensor sensors:0 mask 2
E/Sensors ( 1249): open_input name:7k_handset de->dname:event4 devname:/dev/input/event4 fd:102
E/Sensors ( 1249): open_input namesensor de->dname:event3 devname:/dev/input/event3 fd:102
E/Sensors ( 1249): open_input name:gsensor de->dname:event2 devname:/dev/input/event2 fd:105
E/Sensors ( 1249): open_input name:surf_keypad de->dname:event1 devname:/dev/input/event1 fd:110
E/Sensors ( 1249): open_input name:Focal touch de->dname:event0 devname:/dev/input/event0 fd:110
E/Sensors ( 1249): sensors_control_activate active=00000020 sensor=00000002 new_sensors=22 changed=2
E/Sensors ( 1249): enable_disable_gsensor sensors:2 mask 2
W/IInputConnectionWrapper( 1341): showStatusIcon on inactive InputConnection


I DISCOVERED IT AS NO GAMES WERE STARTING... AND WIFI STILL DON'T WORK AND I DELTED AMKD2 AS ERROR WAS SHOWN UP FOR THAT TOO AND AFTER REMOVING ERROR GOT REMOVED

 

[cool.gautam]

SECOND CATALOG


-


W/IInputConnectionWrapper( 1041): showStatusIcon on inactive InputConnection
E/Sensors ( 1081): sensors_list size = 2
E/Sensors ( 1081): sensors_list size = 2
E/Sensors ( 534): open_input name:7k_handset de->dname:event4 devname:/dev/input/event4 fd:114
E/Sensors ( 534): open_input namesensor de->dname:event3 devname:/dev/input/event3 fd:114
E/Sensors ( 534): open_input name:gsensor de->dname:event2 devname:/dev/input/event2 fd:118
E/Sensors ( 534): open_input name:surf_keypad de->dname:event1 devname:/dev/input/event1 fd:122
E/Sensors ( 534): open_input name:Focal touch de->dname:event0 devname:/dev/input/event0 fd:122
E/Sensors ( 1081): sensors_data_data_open sEvents_fd[0]:34 nh->data[0]:32
E/Sensors ( 1081): sensors_data_data_open sEvents_fd[1]:35 nh->data[1]:33
E/Sensors ( 534): sensors_control_activate active=00000022 sensor=00000002 new_sensors=22 changed=0
E/mm-camera( 517): config_proc_CAMERA_STOP_SNAPSHOT: state is not correct ctrl->state = 7
W/IInputConnectionWrapper( 1081): showStatusIcon on inactive InputConnection

 

[samrox144]

did the rom flash on phone.....i will upload sensors files replace them...
and post a copy of meta-inf from rom we have modified

 

[cool.gautam]

Rom with wifi configs later on which u sent did not flash...but wid cam settings it got flahsed and meta-inf with wifi settings or without?

 

[samrox144]

replace these files in thier folders

 

[cool.gautam]

ok...and what about wifi? i added strings still no results

 

[samrox144]

i want to see how you added so post that update script....did u copy the file to xbin

 

[cool.gautam]

yeah......ok i am posting it

LinK = Multiupload.com - upload your files to multiple file hosting sites!

 

[samrox144]

ok it is correct ....did u copy the files to thier folder

 

[cool.gautam]

yes i did....!! i rechecked even

 

[cool.gautam]

tried files from both wififix and wififix2 that u uploaded

 

[cool.gautam]

w8 i am retrying with whole process again....stay stuned few mins

 

[cool.gautam]

Its showing " E:Error in /sdcard/droid testing.zip
(status 6)
Installation aborted

 

[samrox144]

ok download the attached file and extract it and copy it to zip file

link=Multiupload.com - upload your files to multiple file hosting sites!

 

[samrox144]

its because of updater script....

 

[samrox144]

do everything to the backup.....file u had it shows error due to some error in update script

 

[cool.gautam]

ok....i just got the catlog of wifi u want it? i mean i just on catlog n den wifi

 

[samrox144]

add the script before the toolbox line and permission line in beetween any permission line

 

[samrox144]

post it here.............

 

[cool.gautam]

ok....and sensors not working tried flashing it....got flahsed but same catlog showing agn