Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
No. The point of setting it u this complicated way is so it can do both. Try making calls on wifi. If it doesn't work try 3g
OK, I take it back. I can't seem to make calls in either direction now. Also, I'm seeing a lot of Sipdroid "Registration failed (Timeout)" notifications.
I'm going to re-check my settings.
Question: Do I need to disable all the phones registered in my GV account except for the SipGate DID number?
Update: When I called my SipGate DID number from another phone, it made it through to my mobile phone OK. I think that means that the SipGate <=> SipSorcery <=> GoogleVoice connection is OK ... at least part of the way.
But, if I call my Google Voice number, my mobile phone rings - and answering the phone doesn't do anything. Does that mean that something on the Google Voice end is busted?
And, when I try to initiate a call from my mobile phone, I get an immediate "Call Ended" indication and SipSorcery never saw it.
What could be broken?
UPDATE 2: Crud. Google is apparently stopping this VoIP capability. When I register my SipGate DID phone number as "Gizmo", GV automatically keeps changing it back to "Mobile" - and won't forward my calls to SipGate.
I too have had issues with this setup. I have managed to route incoming/outgoing calls successfully after editing my SS dial plan as suggested by joepaz (thanks jp). However, when I use the sipdroid or native dialer the call disconnects after only about 10 seconds and there is no audio on my device. Any ideas why I can't hear the other party or they can't hear me and why the call terminates so quickly? BTW I am running my G1 on CyanogenMod 4.2.4
-Thanks to all for your time and support.
AdamG - Thanks for all your help!
I think I have it working now - I just initiated a VoIP call over 3G, so I'm pretty sure that it will work fine over my WiFi at home.
The two things that were apparently messing up my setup were: Setting the Phone Type in your previous posting, and clearing out the Caller ID in SipDroid Settings.
Now that things appear to be OK, is there a recommendation on setting up the phone forwarding/voicemail options on all my phones with Google Voice? For example, will there be any odd behaviour if my GV number is forwarded to all phones? Also, should the only Google voicemail-enabled phone be my mobile phone?
When I called my mobile phone, it seemed like I was getting calls on top of each other from my G3 provider at the same time I received the same call over SipDroid.
hey guys. i've been following this thread for awhile. i basically followed all your instructions to set up sipgate, sipdroid, and google voice to do voip calling on my motorola droid. it works but it only works to a certain extent. the problem i am having is that if i just turn wifi on, sipdroid gets the green light, i wait like 20 seconds, and then i can make a call thru the "gv app" (by evan charlton). the call will go thru and i can receive calls at that time.
however, if i leave wifi on and let's say i want to try this like 15 minutes later (after my phone sleeps, but wifi is set not to sleep) then i cannot make or receive calls thru gvapp/sipdroid. but if i turn my wifi off and then back on (and wait like 20 seconds) then i can make and receive calls again, but only for that limited amount of time before my phone sleeps.
so there seems to be a problem with sipdroid in that as soon as the phone "sleeps", you cannot make or receive calls. this has been my problem. i dont know if you guys are experiencing the same thing. i am using sipdroid version 1.1.8 beta. i dont know if 1.2.1 fixes this problem. i may try that soon. thanks for the help guys.
If you already have a GV number, no matter how long, you still need to setup a Sipgate/gizmo5/ipKall/etc. SIP number and register it as a forwarding phone in GV. You still need SipSorcery and Sipdroid too.I've had my google voice number for a while. If I already have my google voice number, do I still need to do all of those things in the OP?
Thanks
Can't help you at all on this one as Evan's GV app, as good as it is, is not supposed to be part of the setup I described. Not in any way.
From what I know about the app, it either pre-dials your GV number so you can dial out with just your contacts regular number OR it initiates a call back to your cell. Either way, it makes regular cell phone calls, meaning not over data only or through SIP. I wouldn't even know where to begin on throwing the app in the mix.
The point of the setup I described and we're talking about here is that you're not making regular cell phone calls any more. It's all free VOIP, handled over the internet. So, no need for dial throughs or call backs at all.
I would first delete Evan's app and see if you can get things to work right. If you suceed, then reinstall his app and just set it to NOT control all the calls. Don't use the official GV app to control any calls either when using my described setup.
Just have Sipdroid active with the green light on and have Sipdroid calls as the preferred type in Sipdroid's settings. Then, you use the normal regular build in dialer on your phone, or you can dial directly from Contacts. Sipdroid will take over and make it a SIP call if you have it how I mentioned above.
AdamG,
I am using wifi to make the calls because i put my phone in airplane mode when i tried it. i receive calls with sipdroid but i make outgoing calls (ones that call me back thru google voice) by dialing out with the gvapp by evan. so this is an option that works but it had problems when the phone slept. i was also using the sipgate username, password, and server rather than sipsorcery's.
i just realized that you changed some information from your first post regarding the username, password, and server to use in sipdroid. so i changed my settings based on that and everything works fine so far with just using sipdroid (i stopped using gvapp; did not uninstall it, just stopped using it). i waited the 20-30 minutes before trying again to see if the phone "sleep" problem has been fixed and it seems like it has. Thanks for the help. if anyone has any questions about my motorola droid setup, feel free to ask. will keep you guys posted on how this works out.
You're welcome.I believe this VoIP solution works for me now. I can call and receive calls at home over VoIP. Thanks, AdamG - Couldn't have done it without you!
Now a question about performance: The audio quality is perfect on both ends of the VoIP call (they sound exactly like a corded phone!) But, there seems to be an approximate 1 second between what is said on one end and when it is heard at the other end. Is this delay typical and unavoidable?
Thanks again ...
No idea. Should work on 3g if you're working on wifi. I think I read at sipdroid.org that some people were having issues until they tried the newest version 1.2.1I continue to have limited success using this setup. I am able to make and receive calls but only over wifi. When I try to use 3G/EDGE I am able to dial out but there is no call audio on my device ( I dont even hear a ringing tone) and the call automatically terminates within a few seconds.
I have tried using SIPDroid v1.1.8 and v1.0.6 but this has not helped. Any ideas why this is happening?
TYIA
im connected to the WIFI perfectly, but still when i tried to call any number i get:
"no suitable data network available" on sipdroid
i have a htc magic T-mobile, unlocked, and rooted if necesary.....
i use it with NO SIM CARD, i just want the email and other features over the wifi, and this VOIP on wifi would be one of the main ones !!!
i have only WIFI
NO EDGE / NO 3G / NO WLAN
any clues how to make it work ?
( i cannot believe the iphone+skype works seamless in this sense and we, with android = open source are stuck here !!!! )