• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Help HELP Samsung s6500D wifi driver problem or my phone is broke

A

angel2004

Lurker
HELP Samsung s6500D wifi driver problem or my phone is broke

Hi
I have an problem with my S6500D.
When i activate wifi, it say error.iF i try activate again the phone is rebooting.

my phone is
Samsung Galaxy mini 2 GT-S6500D ORANGE
android 2.3.6 GINGERBREAD.XXLC4
S6500DXXLC3
KERNEL 2.6.38.6 DPI@deLL166#1
ROM STOCK S6500DXXLC4_S6500DXXLC3_S6500DORLLC2_HOME
Please help me
Click to expand...
That it the begin error showing.

###########################
# RAMDUMP Mode #
# (ARM9 mode) #
- AP -
Oops
AR6K Async PID=313
- CP -
smem_0cil_tmp.c LINE=0
Format :
qxdm_message :
###########################
Click to expand...
after that my wifi not working --- Error ----

logcat log:
-----------------------------------------------------
08-19 12:31:08.459: I/wlan_tool(1505): wifi loading
08-19 12:31:08.459: I/wlan_tool(1506): START wifi REGION
08-19 12:31:08.469: I/wlan_tool(1508): MID wifi DEFAULT
08-19 12:31:08.479: I/wlan_tool(1509): LAST wifi REGION
08-19 12:31:08.499: I/wlan_tool(1515): Try to load driver with insmod
08-19 12:31:18.929: I/wlan_tool(1598): ar6000 driver fails to load
08-19 12:31:19.019: I/wlan_tool(1609): wifi unloading
08-19 12:31:21.369: E/WifiService(185): Failed to load Wi-Fi driver.
Click to expand...
Today i try command in adb shell
su
insmod /system/wifi/ar6000.ko
but dont working ....
when i type
rmod ar6000 my phone is rebooting.

That it is the dmesg log:

<1>[ 104.899830] ar6000_init_module() - board_hw_revision : 3
<1>[ 104.899851] ar6000_init_module() - refClock : 19200000
<1>[ 104.899866]
<1>[ 104.899870] AR6K: ar6000_init_module() ver 3.1.72.5
<1>[ 104.899885] ar6000_pm_init()
<1>[ 104.899956] PM state : 1
<1>[ 104.899965] pm_buf : 1
<1>[ 104.899973] pmoff : false
<1>[ 104.900123] AR6K: ar6000_pm_probe enter
<4>[ 104.900135] wlan_setup_power on --enter
<6>[ 104.900145] wlan_setup_ldo_33v - set by Wifi : on
<6>[ 104.900156] wlan_setup_ldo_33v - old wlan_33v_flag : 0
<6>[ 104.900166] wlan_setup_ldo_33v - new wlan_33v_flag : 1
<4>[ 104.900180] wlan_set_gpio - 109 : on
<6>[ 104.900196] wlan_set_gpio: before (1) :: gpio_get_value = 0
<6>[ 104.900220] wlan_set_gpio: after (1) :: gpio_get_value = 1wlan_set_gpio - 33 : on
<6>[ 104.900360] wlan_set_gpio: before (1) :: gpio_get_value = 0
<6>[ 104.900376] wlan_set_gpio: after (1) :: gpio_get_value = 1wlan_status entered
<6>[ 105.000498] mmc2: Slot status change detected (0 -> 1)
<4>[ 105.000651] msm_sdcc_setup_vreg : 2 : 0 : level : 1800
<4>[ 105.000916] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<1>[ 105.001704] AR6K: ar6000_init_module
<1>[ 105.002246]
<1>[ 105.002251] AR6K: ar6000_init_module() success
<4>[ 105.017071] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 105.069068] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 105.071646] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 105.079523] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 105.098813] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 105.110166] mmc2: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 105.130216] mmc2: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 105.138948] mmc2: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 105.140736] mmc2: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 105.143424] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 105.143786] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 105.143951] msm_sdcc_setup_vreg : 2 : 1 : level : 1800
<4>[ 105.146914] mmc2: queuing unknown CIS tuple 0x80 (1 bytes)
<4>[ 105.147259] mmc2: queuing unknown CIS tuple 0x81 (1 bytes)
<4>[ 105.147454] mmc2: queuing unknown CIS tuple 0x82 (1 bytes)
<6>[ 105.147591] mmc2: new high speed SDIO card at address 0001
<6>[ 105.154279] AR6K: ar6000_dma_buffer_alloc(size = 32768) = e9660000
<1>[ 105.160014]
<1>[ 105.160032] AR6K: [AR6K startup] ar6000_avail_ev()
<1>[ 105.160551] ar6000_avail_ev() Got WMI @ 0xbf072db4.
<1>[ 105.160591] AR6K: networksubtype : 0, num_device : 1
<1>[ 105.160646] BMI: Creating sysfs entry
<1>[ 105.192774] AR6K: target type AR6003
<1>[ 105.193184] AR6K: num_dev=1 fwmode=0x1 fwsubmode=0x0 fwbr_buf=0
<1>[ 105.193303] Firmware mode set
<1>[ 105.194008] BMI enabled: 3
<1>[ 105.194018] BMI: Requesting device specific configuration
<1>[ 105.194751] old options: 0, old sleep: 29
<1>[ 105.195918] AR6K: refClock = 19200000 Hz
<1>[ 105.196364] Board Data download address: 0x541f30
<7>[ 105.196376] AR6K: board_hw_revision: 3
<7>[ 105.196391] AR6K: find board cal file: ath6k/AR6003/hw2.1.1/bdata.SD31.bin.03
<7>[ 105.198791] AR6K: Board cal file exist: ath6k/AR6003/hw2.1.1/bdata.SD31.bin.03
<1>[ 105.198811] AR6K: selected board data ath6k/AR6003/hw2.1.1/bdata.SD31.bin.03
<1>[ 105.198901] AR6K: android_request_firmware(): raw_filename=ath6k/AR6003/hw2.1.1/bdata.SD31.bin.03, bufsize=4096
<1>[ 105.199779] AR6K: android_request_firmware(): raw_filename=softmac, bufsize=17
<1>[ 105.200642] ar6000_psminfo_update: psm_info is 1
<1>[ 105.200941] Board extended Data download address: 0x542330
<1>[ 105.208319] AR6K: android_request_firmware(): raw_filename=ath6k/AR6003/hw2.1.1/otp.bin, bufsize=4096
<1>[ 105.252571] AR6K: ath6k/AR6003/hw2.1.1/athwlan.bin firmware will be loaded
<1>[ 105.252811] AR6K: android_request_firmware(): raw_filename=ath6k/AR6003/hw2.1.1/athwlan.bin, bufsize=90112
<1>[ 105.730425] AR6K: android_request_firmware(): raw_filename=ath6k/AR6003/hw2.1.1/data.patch.hw3_0.bin, bufsize=4096
<1>[ 105.734185] AR6K: Enable ANI
<1>[ 105.856325] AR6K: Target Ready: credits: 23 credit size: 1664
<1>[ 105.856342] AR6K: ** HIF layer does not support scatter requests (17)
<6>[ 105.856360] AR6K: ar6000_virtual_scatter_buffer_alloc(req = 0, size = 16776) = e9668000
<6>[ 105.856379] AR6K: ar6000_virtual_scatter_buffer_alloc(req = 1, size = 16776) = e9670000
<6>[ 105.856395] AR6K: ar6000_virtual_scatter_buffer_alloc(req = 2, size = 16776) = e9678000
<6>[ 105.856412] AR6K: ar6000_virtual_scatter_buffer_alloc(req = 3, size = 16776) = e9680000
<1>[ 117.882746] Timeout waiting for recv message
<1>[ 117.882764] Target debug interrupt
<3>[ 117.882774] ar6000_target_failure: target asserted
<1>[ 117.884526] AR6K: Location of register dump data: 0x544088
<1>[ 117.894480] AR6K: Register Dump:
<1>[ 117.894493] 0 : 0x30000582
<1>[ 117.894542] 1 : 0x000015B3
<1>[ 117.894563] 2 : 0x008E23D7
<1>[ 117.894583] 3 : 0x004F5B31
<1>[ 117.894603] 4 : 0x008E23D7
<1>[ 117.894622] 5 : 0x00060133
<1>[ 117.894642] 6 : 0x0000001F
<1>[ 117.894660] 7 : 0x00001878
<1>[ 117.894678] 8 : 0x00000001
<1>[ 117.894698] 9 : 0x008E23A8
<1>[ 117.894717] 10 : 0x005442B8
<1>[ 117.894737] 11 : 0x00544258
<1>[ 117.894755] 12 : 0x00000009
<1>[ 117.894775] 13 : 0x00000000
<1>[ 117.894793] 14 : 0x00917F9C
<1>[ 117.894812] 15 : 0x00917FA7
<1>[ 117.894832] 16 : 0x008E0E9A
<1>[ 117.894850] 17 : 0x00916C20
<1>[ 117.894870] 18 : 0x008E1038
<1>[ 117.894888] 19 : 0x00000000
<1>[ 117.894907] 20 : 0x408E23D7
<1>[ 117.894927] 21 : 0x00544198
<1>[ 117.894945] 22 : 0x00540000
<1>[ 117.894965] 23 : 0x00000001
<1>[ 117.894983] 24 : 0x808E295E
<1>[ 117.895003] 25 : 0x005441F8
<1>[ 117.895022] 26 : 0x005617DC
<1>[ 117.895042] 27 : 0xC08E23D7
<1>[ 117.895060] 28 : 0x808E1149
<1>[ 117.895080] 29 : 0x00544218
<1>[ 117.895098] 30 : 0x00000010
<1>[ 117.895117] 31 : 0x00542900
<1>[ 117.895137] 32 : 0xC08E0F24
<1>[ 117.895155] 33 : 0x00544238
<1>[ 117.895175] 34 : 0x00000010
<1>[ 117.895193] 35 : 0x00544258
<1>[ 117.895213] 36 : 0x408E1038
<1>[ 117.895232] 37 : 0x00544258
<1>[ 117.895252] 38 : 0x00540000
<1>[ 117.895270] 39 : 0x00000001
<1>[ 117.895288] 40 : 0x808E1676
<1>[ 117.895308] 41 : 0x005442B8
<1>[ 117.895327] 42 : 0x00000000
<1>[ 117.895345] 43 : 0x00000000
<1>[ 117.895363] 44 : 0x808E1640
<1>[ 117.895383] 45 : 0x005442D8
<1>[ 117.895402] 46 : 0x00540000
<1>[ 117.895420] 47 : 0x00000000
<1>[ 117.895440] 48 : 0x808E16BD
<1>[ 117.895458] 49 : 0x005442F8
<1>[ 117.895478] 50 : 0x00540D14
<1>[ 117.895497] 51 : 0x00000000
<1>[ 117.895515] 52 : 0x408E0C24
<1>[ 117.895535] 53 : 0x00544318
<1>[ 117.895553] 54 : 0x00519291
<1>[ 117.895573] 55 : 0x000017A8
<1>[ 117.895591] 56 : 0x00000000
<1>[ 117.895610] 57 : 0x00544338
<1>[ 117.895628] 58 : 0x00559301
<1>[ 117.895648] 59 : 0x00040020
<1>[ 117.896156] Failed to connect to WMI CONTROL service status:-1
<1>[ 117.896173] ar6000_avail: ar6000_init
<1>[ 117.896183] BMI: Deleting sysfs entry
<1>[ 117.896208] AR6K: wmi_shutdown() _wmi_init = 0
<4>[ 117.896248] AR6K startup used greatest stack depth: 4944 bytes left
#
Click to expand...
i typing on my phone *#526# WlanTest Menu.
It is the display the message:


WlanTest Engineering Mode Status
TestMode Driver loaded [0k]
Click to expand...
after that i activate my wifi, it working (not error or rebooting phone), but my phone not find any access point (AP) and it displays message Scanning, scanning ....

PS:
Sorry for my broken English.

Thanks a lot .
I appreciate any responses
 
Hi

My problems is solved !

[HIGH]<1>[ 117.882746] Timeout waiting for recv message
<1>[ 117.882764] Target debug interrupt
<3>[ 117.882774] ar6000_target_failure: target asserted
............................
<1>[ 117.896156] Failed to connect to WMI CONTROL service status:-1
<1>[ 117.896173] ar6000_avail: ar6000_init
<1>[ 117.896183] BMI: Deleting sysfs entry
<1>[ 117.896208] AR6K: wmi_shutdown() _wmi_init = 0
[/HIGH]That errors solved with ....

I rooted my phone and I modified the file /system/bin/wlan_tool the row

insmod /system/wifi/ar6000.ko

with

insmod /system/wifi/ar6000.ko wmitimeout=5000

wmitimeout is the parameter that sets the timeout wifi driver to connect to WMI CONTROL service
/* Wait for Wmi event to be ready */
Default wmitimeout= 20

My phone is working now .

Thank you,
Android Forum :congrats:
 
You must log in or register to reply here.
Back
Top Bottom