• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Help Help!!!! Superpad 2 stuck on calibrate... Look please

A

averagejoe604

Lurker
HELPP! I have a superpad 2, the p041 model and I cant seem to get past the touch calibration screen. I did a factory reset on my pad while go, and now everytime I reboot it it says "TOUCH CROSSHAIR TO CALIBRATE" AND then it gets stuck on 'TRY ONCE MORE" I seriously cannot get past these screen no matter, how hard and repetitive i press on these crosshairs. Plugging a mouse in doesnt seem to work when i try clicking on the crosshairs also. I CANT GET PAST THIS SCREEN!! HELP PLEASE, I WILL APPRECIATE ANY, BECAUSE I DONT WANT TO USE THIS TABLET AS A PAPERWEIGHT :( I cant even access anything because everytime i turn it on, im at the screen calibration test.


p.s does the p041 model mean i have a fake superpad also :|
 
Since you know it's a P041, you could try flashing a newer P041 firmware. (Google "flytouch3 P041 firmware"). I upgraded my P041 with a newer firmware and it improved several slightly buggy problems. Anyway, could solve your boot problem (IF it's not hardware-related!)
 
Hey guys everytime I reboot I still am at the "TOUCH CROSSHAIR TO CALIBRATE" AND then it gets stuck on 'TRY ONCE MORE"...help? is there anyway i could put a file into my sd card that has pre-set screen calibration settings? much help appreciated..
 
Sounds like the screen is broken - no response to touch. I have no idea how that could have happened just with a software reset, but... no answers come to mind.
 
hi can someone hekp please i done a tetest on my android,,and now when i boot it up,its saying touch crsoohair to calibrate..i ant get past the screen can soemone help me plzzzzzzzzzzz
 
rosina71 said:
hi can someone hekp please i done a tetest on my android,,and now when i boot it up,its saying touch crsoohair to calibrate..i ant get past the screen can soemone help me plzzzzzzzzzzz
Click to expand...

Two possibilities -
1/ your touch screen and/or connecting ribbon cable is broken

2/ you have corrupted the firmware

the corrupted firmware is easiest to fix, download an appropriate firmware for your model number and re-flash it
If its the touch screen then you could buy a replacement (chinagrabber or ebay) and replace it.
 
First open ur tab first and wait until the Phrase " touch crosshair to calibrate " Then Use Somthing Like A Pencil and touch the center inside the circle each time it appears ( 5 times ) > after that u will find it opened ........
 
I had the same issue. The narrow cable that comes from display was causing the issue. Fixed it properly into motherboard socket and that solved the issue.
 
You must log in or register to reply here.
Back
Top Bottom