CyanideSuicide1
Newbie
A lot of people including me have been having trouble with boot loops or get stuck on the Motorola Symbol after messing around while rooting. In this post I will post some instructions on how to get out of this and get your phone back to normal.
Credit to files goes to CRPercodani and UBRocked for files and instructions from another thread.
1) Download the following drivers, programs, and files.
If your phone is like how mine was and the battery died out but could not charge, try buying a batter charger.
2)Flash FRG22D
3) Rooting your phone
Credit to files goes to CRPercodani and UBRocked for files and instructions from another thread.
1) Download the following drivers, programs, and files.
- Android Update 2.2 (FRG22D) VZW_A855_FRG22D_QSC6085BP_C_01.4..sbf
- (RSDLite 4.6) http://androidoverdrive.com/downloads/RSDLite4.6.7z
- Current Motorola Drivers
If your phone is like how mine was and the battery died out but could not charge, try buying a batter charger.
- Instructions:
- Download all of the files above including the 32-bit OR 64-bit Motorola USB Drivers.
- Install RSDLite AND the 32-bit or 64-bit Motorola USB Drivers (Depends on your system most will need 32-bit some will need 64-bit)
- Connect your phone to USB and turn it off then turn it back on, while your phone is booting hold up on the DPAD. (Some users have said it is easier to hold the volume down button and camera button instead.)
- Run RSD Lite 4.6 as Administrator (For all you Vista and 7 folks out there. If you are using XP you may not need to run as Administrator)
- Click the ... next to the filename box and browse to where you saved the .sbf file and double click the .sbf file.
- Hit start and below it should give you completion progress and all of that.
- Once your phone is done being flashed (It may take a while so don't unplug it) it will reboot and you will be back at stock no root.
- Done
3) Rooting your phone
- Instructions and Files
- Download the SPRecovery SBF file: MC1_A855_1282081087_Recovery-Onl..sbf
- Follow the instructions from before about how to load the .sbf into RSD Lite.
- Flash SPRecovery to your droid and reboot.
- Download this file and place on the root of your SD card. (Meaning, do not put it in a folder.)
- Reboot into recovery mode (Turn off then hold the power and