D
Deleted User
Guest
So this project took me months to finish and i wanted to wait before i said anything.
It took 3 months for all the parts and and equipment to do this.
To save money i used old parts to make it premium but cheap for my wallet at the sametime
So here is parts:
• Bought a Nexus 6P shell and display.
• a H1511 Pre-Configured Motherboard similar to the nexus 6p motherboard.
• 3GB DDR3. 900MHz RAM Chip.
• 64GB EMMC Storage Chip.
• Bluetooth/Wifi cable.
• 3450MAh Li-On Battery.
• 1440x2560 screen resolution LCD Display.
• Qualcomm Snapdragon 810 8 Core CPU Chip 3.0GHz
• GPU: Qualcomm Andreno 430 600MHz (prebuilt in cpu).
• 16MP Back Camera Module and 8MP Front camera module.
• 2x 5.1CH Speakers
• 1x samsung fingerprint scanner sensor chip.
There is more but too much to put on this list.
I had to re-engineer my GRE OS for it but got it working im optimizing the os as much as i can.
So far im not removing the nexus logo bevsuse i dont want people to herrass her and tell her its a fake version of it, witch it is, but its not a nexus hardware anyways so it wouldnt matter.
So far i tested all functions and they work great except.the fingerprint sensor needs to be tweaked.
The bootloader i chose is similar to the nexus 6p withc i had to reengineer the bootloader for it to work, but got it
All the chips were cured and heated properly to the board.
However should i even add a headphone jack module to the phone or should i cap the hole?
It took 3 months for all the parts and and equipment to do this.
To save money i used old parts to make it premium but cheap for my wallet at the sametime
So here is parts:
• Bought a Nexus 6P shell and display.
• a H1511 Pre-Configured Motherboard similar to the nexus 6p motherboard.
• 3GB DDR3. 900MHz RAM Chip.
• 64GB EMMC Storage Chip.
• Bluetooth/Wifi cable.
• 3450MAh Li-On Battery.
• 1440x2560 screen resolution LCD Display.
• Qualcomm Snapdragon 810 8 Core CPU Chip 3.0GHz
• GPU: Qualcomm Andreno 430 600MHz (prebuilt in cpu).
• 16MP Back Camera Module and 8MP Front camera module.
• 2x 5.1CH Speakers
• 1x samsung fingerprint scanner sensor chip.
There is more but too much to put on this list.
I had to re-engineer my GRE OS for it but got it working im optimizing the os as much as i can.
So far im not removing the nexus logo bevsuse i dont want people to herrass her and tell her its a fake version of it, witch it is, but its not a nexus hardware anyways so it wouldnt matter.
So far i tested all functions and they work great except.the fingerprint sensor needs to be tweaked.
The bootloader i chose is similar to the nexus 6p withc i had to reengineer the bootloader for it to work, but got it
All the chips were cured and heated properly to the board.
However should i even add a headphone jack module to the phone or should i cap the hole?