Jelly Bean out today for epic touch!

[Dngrsone]

After JB my battery is draining fast and the RAM is constantly at 550-600 even though there are no running programs,I also disabled some programs manually and still it's running high, what is wrong with this update?

After a software upgrade like this, you need to do a reset-- back up your data, turn the phone off, then turn it back on while holding the volume-up button.

 

[eyalylu]

Do I press reboot now?

 

[Dngrsone]

yes

--- edit: My apologies; clear cache, then reboot

 

[eyalylu]

Thank you very much! it lowered the ram to 460 even with about 5 open applications

 

[godsdragon]

How do I take a screenshot now? Power/Home does not work... and there's no option in the device options.

That is not working for me. I usually pressed the home button first and then the power button otherwise, you end up turning off the screen.

It took me a while to do the simultaneous trick.. I finally got it... You got to be very precise...

 

[EVOjet]

I am following the steps for Simple Upgrade Tool and am stuck at Step #7: Plug your USB data cable into your phone and PC. Device drivers will be installed. Do not unplug the USB data cable from the device. Once drivers are installed select Next.

The phone has been plugged in and on the "downloading" screen (see picture below) for about 30 minutes. I am assuming this is too long for this step. How do I safely return to the beginning of the process?

Additionally, the computer screen has shown the following during this time as well.

 

[DragonSlayer95]

That's normal, your fine to press next onto the flashing screen

 

[heyjoojoo]

It took me a while to do the simultaneous trick.. I finally got it... You got to be very precise...

I'm not sure how much more precise I can press both of the buttons unless I used some sort of accelerometer instrumentation to measure the amount of vibration received at the same time. But it just is not working.