toptobottom
Android Enthusiast
Maybe you could consider this to protect your Note 3. Don't have to worry about no bubbles and it comes in handy when you least expect it!
-
After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
Let's talk screen protectors!
- Thread starter rawhide85
- Start date
jetguat
Android Enthusiast
The Note 3 version says to be 0.40mm on the iloome sire. One of the thicker protectors out there. Does it feel thick or heavy? Some commented that the Spigen glad.t feels heavy
zipred
Android Expert
I usually refrain from protectors but haven't tried glass. This one is appealing, the question is will it fit under the edges of my case or is it too narrow ?
I'm using this Spigen case
SPIGEN Samsung Galaxy Note 3 Case Protective [BOUNCE] [Black] Premium Soft TPU Case for Galaxy Note III - ECO-Friendly Packaging - Black (SGP10443):Amazon:Cell Phones & Accessories
Thanks
zipred
Android Expert
It's important to be very careful around a steamy moist environment, it's easy to trigger the moisture detectors, turning them red and voiding your warranty.
iPredator
Well-Known Member
Just got my iloome screenmate flex in earlier on going to give it a day or two test run and ill let you guys no what i think of it. From the start though it is 100 times better then the zagg junk i had on my s3 before i toke it off.
So after using the iloome for a little bit i must say i love it
So after using the iloome for a little bit i must say i love it
I usually refrain from protectors but haven't tried glass. This one is appealing, the question is will it fit under the edges of my case or is it too narrow ?
I'm using this Spigen case
SPIGEN Samsung Galaxy Note 3 Case Protective [BOUNCE] [Black] Premium Soft TPU Case for Galaxy Note III - ECO-Friendly Packaging - Black (SGP10443):Amazon:Cell Phones & Accessories
Thanks
Fitting under any case should not be an issue. The edges of the screen protector are tapered. I have tried a couple cases so far and no issues with any of them.
I used the Flexible Glass screen protector. I like it well enough, it doesn't interfere with the touch sensitivity at all, and gives me additional peace of mind.
But it is VERY unforgiving.
ONE little flaw and you're stuck with it. For example, I took great pains to clean the screen, assure everything was aligned and in pristine condition. BUT: between the moment I removed the adhesive and the moment it met the screen, a little bitty hair floated onto it. No way to notice it until it was too late. It's not much, maybe a centimeter in length... but it's still THERE. As are a couple of imperfections in the adhesive that appear to be bubbles but I know they're not. They're only visible with the screen off... but IS there a perfect application of a screen protector?
I'd be hesitant to say "yes"...
But it is VERY unforgiving.
ONE little flaw and you're stuck with it. For example, I took great pains to clean the screen, assure everything was aligned and in pristine condition. BUT: between the moment I removed the adhesive and the moment it met the screen, a little bitty hair floated onto it. No way to notice it until it was too late. It's not much, maybe a centimeter in length... but it's still THERE. As are a couple of imperfections in the adhesive that appear to be bubbles but I know they're not. They're only visible with the screen off... but IS there a perfect application of a screen protector?
I'd be hesitant to say "yes"...
droidobsessed
Well-Known Member
I would not say heavy. More substantial/thicker than the cheap screen protectors I have used in the past. That is very subjective. I won't go back regular screen protectors after this.
Veritas4420
Android Enthusiast
One thing Ive started to do is go in the bathroom and turn the shower on hot. It seems to eliminate all the dust particles and make for a lot cleaner install. Worked for my S3,S4,N2 and Note 3.
Yes they do recDNA but it's not just water it's a cleaning fluid/water mix.
I had a great time today at the South Shore Plaza mall. Ryan Roach my Ghost Armor technician installed this great product for me. He first had me remove the back so I could take out the battery. After wiping the screen with a microfiber cloth Ryan sprayed the screen with solution, then the back of the protector and placed it on the screen. A few fine adjustments and some more solution on the front of the protector then the squeegee was vigorously applied. After that it was into the dryer for 10 minutes.
Right across from the Ghost Armor kiosk was a fine seating area with leather couches and chairs so my wait was very comfortable. Ryan gave me the high sign and we finished our transaction. Ryan explained that I should wait 15 minutes before using the phone and a day before I put the case back on.
The screen looks a little streaky when it's fresh out the dryer but Ryan assured me this would fade away. It did. The screen is now crystal clear and has a much softer feel to it. The s-pen functions haven't been affected at all.
Once again I highly recommend this product and wish to give Ryan his props for his courteous and professional service.
Methos1979
Android Enthusiast
I received my Spigen GLAStR screen protector and installed it. First let me say as with all Spigen products it appears to be well made and well packaged. For those that do not know what this is, it is a screen protector made of tempered glass. It is quite thick and rigid. It boasts a 9H hardness factor and is designed to resist scratches while offering the same tactile feel of the phones Glorilla Glass. It is not unbreakable. However, if it does break it is designed to shatter but maintain itself as a single piece due to a special coating (think of a car windshield).
I bought this screen protector as a replacement to the crappy plastic one I had installed at the Verizon store when I bought my GN3 two weeks ago. While it did the job, the tactile feel was less than great and it gathered greasy fingerprints like nobody's business and drove me crazy. I would love to just go with the plain Gorilla Glass but I'm paranoid about breaking it, even though I rarely drop my phones (although I have dropped every one I've owned in the past a least once!).
I already have a Spigen Neo Hyrid case on the phone and so I'm well acquainted with Spigen's quality product. The packaging was very nice and came with the usual tools needed for a successful installation - alcohol swab, microfiber cloth, squeegee, instructions, glass screen. The screen itself is quite thick and I can see how it would provide great protection.
I followed instructions to a T even performing the process in a controlled clean room environment where I work in full clean room garb. Everything seemed to go very well, just as the instructions stated. However, there seem to be two areas that are not adhering as advertised. The lower left corner will not seat in an area about the size of my pinky fingernail and worse, an area in the upper left corner about a half inch down and about an inch and a half to the right, cutting up right about the G in Samsung.
There was nothing on the screen. It was very clean since I had the old screen protector on there from day one. Even so, I cleaned off the screen with alcohol and microfiber wipe like I was supposed to. It almost seems like there is no 'adhesive' material in those areas.
This screen protector is VERY expensive. $39.99. Most people would not even consider that at that price and I don't blame them. Truth be told, I always just bought the cheap plastic ones and refused to pay for the 'nicer' plastic ones because they were too expensive at $20. But I figured I'd gamble on this one. Had the installation process gone better I would not have felt bad about the price since the tactile feel of the glass screen is excellent. It's also VERY clear and works flawlessly with finger swiping.
I've sent an email to the company to see what went wrong and if there is a way to fix this. The directions do not recommend 'reusing' this screen protector and so I'm loathe to pull it up and try again until I hear back from them. I'll keep this thread posted as to what happens once I hear back from them. The directions also said that "small bubbles should disappear in a couple days" so I'm hoping maybe these two surfaces will re-seat in a couple days but these are far from 'small bubbles'!
In the interim, I cannot recommend this product at this time.
I bought this screen protector as a replacement to the crappy plastic one I had installed at the Verizon store when I bought my GN3 two weeks ago. While it did the job, the tactile feel was less than great and it gathered greasy fingerprints like nobody's business and drove me crazy. I would love to just go with the plain Gorilla Glass but I'm paranoid about breaking it, even though I rarely drop my phones (although I have dropped every one I've owned in the past a least once!).
I already have a Spigen Neo Hyrid case on the phone and so I'm well acquainted with Spigen's quality product. The packaging was very nice and came with the usual tools needed for a successful installation - alcohol swab, microfiber cloth, squeegee, instructions, glass screen. The screen itself is quite thick and I can see how it would provide great protection.
I followed instructions to a T even performing the process in a controlled clean room environment where I work in full clean room garb. Everything seemed to go very well, just as the instructions stated. However, there seem to be two areas that are not adhering as advertised. The lower left corner will not seat in an area about the size of my pinky fingernail and worse, an area in the upper left corner about a half inch down and about an inch and a half to the right, cutting up right about the G in Samsung.
There was nothing on the screen. It was very clean since I had the old screen protector on there from day one. Even so, I cleaned off the screen with alcohol and microfiber wipe like I was supposed to. It almost seems like there is no 'adhesive' material in those areas.
This screen protector is VERY expensive. $39.99. Most people would not even consider that at that price and I don't blame them. Truth be told, I always just bought the cheap plastic ones and refused to pay for the 'nicer' plastic ones because they were too expensive at $20. But I figured I'd gamble on this one. Had the installation process gone better I would not have felt bad about the price since the tactile feel of the glass screen is excellent. It's also VERY clear and works flawlessly with finger swiping.
I've sent an email to the company to see what went wrong and if there is a way to fix this. The directions do not recommend 'reusing' this screen protector and so I'm loathe to pull it up and try again until I hear back from them. I'll keep this thread posted as to what happens once I hear back from them. The directions also said that "small bubbles should disappear in a couple days" so I'm hoping maybe these two surfaces will re-seat in a couple days but these are far from 'small bubbles'!
In the interim, I cannot recommend this product at this time.
Simon_Gardner
Android Expert
Is the Note 3 screen Gorilla glass?
NeoGrandizer
Android Expert
I don't think it's been confirmed. It could be dragontrail.
As for the adhesive, that seems to be the norm on first application of tempered glass protectors. It looks like bubbling and doesn't adhere. This has happened to me using Spigen's Glas.t for the Note and Seidio's Vitreo on the Note 2. However, I use the silicone squeegee and push it outward every now and then. The bubbles did disappear after a few hours on both (and the Vitreo's bubbling was the size of a nickel). I have a bit of OCD and it did bother me during those hours as I would usually apply the squeegee to it.
OldManBill
Lurker
I'm using the same case and screen protector. Mine is entirely/clearly adhered now after 10 (I think) days. Initially there were just 2 small bubbles that have disappeared. I like it. It feels great and says clean. Your bubbles however sound much larger than I would think is expected. I did use the squeegee quite a bit.
As far as the case goes, I got the champagne color, it looks pretty sharp.
As far as the case goes, I got the champagne color, it looks pretty sharp.
jetguat
Android Enthusiast
had been considering the GLAS.tR. well probably the GLAS.t slim over the .tR since its thinner. But I'm leary about both now after reading more than a few mixed reviews. Thinking about taking a change on the iLoome Flex. its its not good.. i'd only be out about $16. I have the Spigen Slim Armour. Really like the case. But customer service, is non-existent with them is seems.
K
KOLIO
Guest
XTREME GUARD currently has a sale.
You can actually use two discount codes to get a screen protector &/or body skin (only items available for the GN3 ATM).
Discount codes are good for all items on their website:
SPOOK80 & SAMSUNG10 will get you both the screen protector & body skin for less than $2.00 w/free shipping.
You can actually use two discount codes to get a screen protector &/or body skin (only items available for the GN3 ATM).
Discount codes are good for all items on their website:
SPOOK80 & SAMSUNG10 will get you both the screen protector & body skin for less than $2.00 w/free shipping.
I had my Ghost Armor installed last Friday and I'm loving it. Very fingerprint resistant. I posted about my experience having it installed in this thread http://androidforums.com/samsung-ga...at-easiest-apply-screen-protector-device.html
PyroSporker
Android Expert
Their customer service has been top notch for a long while, in all my many dealings with them under a few different company/product names. I haven't made a purchase in some time, so it could have changed but I'm not sure. (my only continuing problem has been that they limit their product lines on a per device basis, but they have always been pretty up front and courteous about it when asked if they are going to build for a device)
What is the problem you are experiencing?
In response to the original topic; I recall reading about the same exact problem of weak/bad adhesive or no adhesive in spots on the .tR for the Galaxy S3, Note 2, and other models when they were first released. The company was quick to deliver refund/revised replacements to those affected... The curved screen of the S3 and Note 2 exacerbated the weak adhesive problem.
It has been a day, has the glass settled in at all and bubbles worked out?
PyroSporker
Android Expert
Did you install the crystalusion yet? When you posted about it, it made me curious about it. Probably a tough application. Seems like one spot from a fingerprint (oil) could leave an area that the product would not treat/adhere to correctly.
I'd definitely glove up for that application.
K
KOLIO
Guest
Waiting until this weekend,when I finally will have the time to sleep-in & let the application set-up/put the phone down overnight (8hrs recommended,although the mfg says you can start using as soon as 5 minutes after application).