enriqueanaya03
Lurker
I thought this was a hardware problem at first. In the vertical position it appeared that the 3rd column from to the right, 2nd from the left, was at times either:
a) Not recognizing touches, any time i clicked on an icon in this column it would register to one of the column on either side. Also, clicking on the home button appeared to have no affect, interestingly the home button is in the same column, just not on the touchscreen.
or
b) Randomly registering touches. Icons or screen elements that lay on this column, and only this column as far as I could tell would be randomly selected.
Initially I thought that there was something wrong with this physical column of the touch screen that extended to the home button, and I cleaned it, took out the battery, etc. However, yesterday I noticed that when I have the screen in a horizontal layout, the same virtual column, 3rd to the right 2nd from the left, which is not in the same physical location, exhibited the same effects! You can see this most easily if you have the slider unlock screen, lock the phone, pull out the keyboard and then bring up the display. The slider should start moving as if it was being touched.
The fact that it is the same virtual column in horizontal layout and vertical layout, that is displaying the behavior, and all other columns seem to be unaffected (unless the behavior is like that in a, in which case surrounding columns will be selected when the 3rd one was) would lead me to believe that there is something wrong w/ the software.
Still no resolution for this though.
a) Not recognizing touches, any time i clicked on an icon in this column it would register to one of the column on either side. Also, clicking on the home button appeared to have no affect, interestingly the home button is in the same column, just not on the touchscreen.
or
b) Randomly registering touches. Icons or screen elements that lay on this column, and only this column as far as I could tell would be randomly selected.
Initially I thought that there was something wrong with this physical column of the touch screen that extended to the home button, and I cleaned it, took out the battery, etc. However, yesterday I noticed that when I have the screen in a horizontal layout, the same virtual column, 3rd to the right 2nd from the left, which is not in the same physical location, exhibited the same effects! You can see this most easily if you have the slider unlock screen, lock the phone, pull out the keyboard and then bring up the display. The slider should start moving as if it was being touched.
The fact that it is the same virtual column in horizontal layout and vertical layout, that is displaying the behavior, and all other columns seem to be unaffected (unless the behavior is like that in a, in which case surrounding columns will be selected when the 3rd one was) would lead me to believe that there is something wrong w/ the software.
Still no resolution for this though.


This worked for me, except I had to put it in the oven. I took out the battery,and preheated to the lowest temp which was 170 degrees. Then I put the phone in and turned off the oven. I waited an hour or so and when I took it out; everything is back to normal. I had already done everything else I had read, including a factory reset, all 3rd party apps removed, etc. Nothing else worked. The hairdryer trick didn't work; I'm guessing because the temp was too low. I used a cool setting for about 20 minutes. Thanks.