hey guys,
so i forgot to mention how i started my tank.....i used a process called fishless cycling. it is a way to cycle the tank with out any fish. cycling is very stressful and some fish may get sick or not make it as the tank goes thru the cycling process.
what is cycling?
cycling is the process of establishing a nitrifying bacteria colony. there are several types of bacteria that are needed to grow in enough numbers that they can process the waste from the fish you will be putting in. the two main bacteria needed are Nitrosomonas and Nitrobacter species. They are part of the process called the Nitrogen cycle. basically ammonia from fish waste gets broken down by Nitrosomonas and converts it to nitrites.......Nitrobacter then takes the nitrites and converts it to nitrates.
the tank is considered cycled when the nitrite levels are 0 and there are a considerable amount of nitrates......the only way to remove nitrates is to do a water change.
so what is fishless cycling?
since the nitrogen cycle needs ammonia from fish waste, one would think you need fish to cycle the tank. this is how it was done in the past. however, there is a new way to do this without adding any fish to the tank. fishless cycling is a practice that is becoming more and more popular and there are a few ways to do it.
the first is by adding ammonia directly to the tank. you can get pure ammonia from places like Home Depot. once added you let the tank run and wait for the bacteria to grow. this is a very long process as the tank will start with 0 bacteria and over time bacteria will grow, but it takes forever.
the way i did it was to start the tank running for 24hrs(just to make sure everything is working corrcetly). i then took a trip to my LFS and asked them for some of there sponge or filter water. basically they take a bag of tank water and rinse the filter media or sponge into it. this dirty water is loaded with bacteria. you then take the bag home and either dump it into your tank or add it to your filter. i just pored mine into the tank.....i added a bit of fish food and left it so that it could brake down into ammonia to help feed the bacteria i introduced. by seeding the tank this way, i cut the cycling time to less then a week. i think it actually cycled in like 5 days!!!!!!!!!
i found this article pretty interesting:Nitrifying Bacteria Facts
anyways i hope this helps others interested in setting up a new tank.
so i forgot to mention how i started my tank.....i used a process called fishless cycling. it is a way to cycle the tank with out any fish. cycling is very stressful and some fish may get sick or not make it as the tank goes thru the cycling process.
what is cycling?
cycling is the process of establishing a nitrifying bacteria colony. there are several types of bacteria that are needed to grow in enough numbers that they can process the waste from the fish you will be putting in. the two main bacteria needed are Nitrosomonas and Nitrobacter species. They are part of the process called the Nitrogen cycle. basically ammonia from fish waste gets broken down by Nitrosomonas and converts it to nitrites.......Nitrobacter then takes the nitrites and converts it to nitrates.
the tank is considered cycled when the nitrite levels are 0 and there are a considerable amount of nitrates......the only way to remove nitrates is to do a water change.
so what is fishless cycling?
since the nitrogen cycle needs ammonia from fish waste, one would think you need fish to cycle the tank. this is how it was done in the past. however, there is a new way to do this without adding any fish to the tank. fishless cycling is a practice that is becoming more and more popular and there are a few ways to do it.
the first is by adding ammonia directly to the tank. you can get pure ammonia from places like Home Depot. once added you let the tank run and wait for the bacteria to grow. this is a very long process as the tank will start with 0 bacteria and over time bacteria will grow, but it takes forever.
the way i did it was to start the tank running for 24hrs(just to make sure everything is working corrcetly). i then took a trip to my LFS and asked them for some of there sponge or filter water. basically they take a bag of tank water and rinse the filter media or sponge into it. this dirty water is loaded with bacteria. you then take the bag home and either dump it into your tank or add it to your filter. i just pored mine into the tank.....i added a bit of fish food and left it so that it could brake down into ammonia to help feed the bacteria i introduced. by seeding the tank this way, i cut the cycling time to less then a week. i think it actually cycled in like 5 days!!!!!!!!!
i found this article pretty interesting:Nitrifying Bacteria Facts
anyways i hope this helps others interested in setting up a new tank.



but I ask cause I don't know . never needed 12 tanks the highest I had was a 50 gallon that was made into a big circle. Looked nice til one day I got lazy and broke the top and for some reason no one had a fix for it but to pay and get a top . drainage came to mind first and that's what happen someone brought the tank at a garage sale . but fill me in how do u treat their water .
). Anyway, just wanted to chime in here, nice to meet a fellow lover of AC's