I AM NOT RESPONSIBLE FOR WHAT YOU DO TO
YOUR PHONE! that being said I am not to thank
for any of these files I just gathered them up for
ya.
first step: downloads
Odin-
http://hotfile.com/get/116095613/4f31fdfe/4e09d08/Odin3_v1.83.exe
cwm4-
http://attachments.xda-developers.com/attachment.php?attachmentid=657960&d=1310959789
us cellular USB drivers for mesmerize-
http://ars.samsung.com/customer/usa...G_ID=0&AT_ID=343427&PROD_SUB_ID=0&PROD_ID=690
1) on your phone go to- settings/applications /
development/ enable USB debugging
2) OK now install Odin on your computer.
3) install USB drivers for mesmerize
4) open Odin
5) hit the PDA button and search for your
cwm4 fixed for cm7 file. DO NOT USE THE
PHONE BUTTON IN ODIN!!!
6) make sure that repartition IS NOT checked!
7) shut down your phone and pull the battery
and the SD card (I never pull the sd card but
your supposed to) out.
8) plug the USB cable that came with your
phone into your computer.
9) plug the USB cable into your phone and hold
down the volume down button until the yellow
download screen appears. (about 5- 10
seconds) .
10) in the upper left side of the screen in Odin
there should appear a yellow block that says
[com2 ] (or com 4 or 5 etc. this means that
Odin sees your phone.
11) now that everything is ready its time to hit
the start button. Odin will show you the
progress as you go. after a minute Odin will say
RESET, just leave your phone alone until Odin
says PASS.
12) OK Odin "passed", now put your SD card
and battery back in your phone and do 3button
boot into recovery. (hold volume up and down
and power all simultaneously until the
SAMSUNG splash screen appears then release.
you now have cwm4 and are 1 step closer to
root and custom rooms. do this then check
back into the forum and we will help with the
rest
in case of emergency-
http://rootzwiki.com/topic/3395-samsung-mesmerize-uscc-official-gingerbread-stock-rom-eh09/
1) open Odin
2) check repartition
3) PDA button, locate the stock gingerbread file,
select it.
4) PIT button, locate the stock PIT file, select it.
5) shut down phone, remove battery and SD
card
6) plug USB into the phone and hold down
volume down until yellow download screen
appears.
7) check that Odin sees your phone and hit the
start button and don't touch the phone till Odin
says PASS!!!
you are now back to stock just as it was when
you bought it!