• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root Official CM11 Nightlies

So, I did some logs for the recent Wifi issue, but I have no clue, atm, how to fix it. Maybe another Dev can take a look at this as well.

Error to fix:
Code: 
[ 03-26 08:44:57.828   572:  765 E/WifiHW   ]

Unable to open connection to supplicant on "/data/system/wpa_supplicant/wlan0": No such file or directory



[ 03-26 08:44:57.848   572:  765 E/WifiMonitor ]

startMonitoring(wlan0) failed!



[ 03-26 08:44:57.848   572:  765 E/WifiStateMachine ]

Failed to setup control channel, restart supplicant

Proof that WPA Supplicant is still working:
Code: 
[ 03-26 08:45:06.577  1126: 1126 I/wpa_supplicant ]

wlan0: Associated with 08:60:6e:bb:68:e8



[ 03-26 08:45:06.597  1126: 1126 I/wpa_supplicant ]

wlan0: WPA: Key negotiation completed with 08:60:6e:bb:68:e8 [PTK=CCMP GTK=CCMP]



[ 03-26 08:45:06.597  1126: 1126 I/wpa_supplicant ]

wlan0: CTRL-EVENT-CONNECTED - Connection to 08:60:6e:bb:68:e8 completed (auth) [id=0 id_str=]

Good wifi:
Code: 
[ 03-26 09:14:29.089  6250: 6268 V/KeepAlert ]

Action android.net.wifi.WIFI_STATE_CHANGED



[ 03-26 09:14:29.179   649:  765 D/WifiConfigStore ]

Loading config and enabling all networks



[ 03-26 09:14:29.239   649:  765 E/WifiConfigStore ]

Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)



[ 03-26 09:14:29.329   147:  560 D/CommandListener ]

Setting iface cfg



[ 03-26 09:14:29.349   147:  560 D/CommandListener ]

Trying to bring up p2p0



[ 03-26 09:14:29.359   649:  764 D/WifiMonitor ]

startMonitoring(p2p0) with mConnected = true

Bad dmesg:
Code: 
<4>[   61.703826] =========== WLAN placed in RESET ========
<3>[   61.708679] bcm432x_sdcc_wlan_slot_status: 34 0
<6>[   61.712829] mmc3: Slot status change detected (1 -> 0)
<4>[   62.440795] dhd_open: firmware_path = /system/etc/firmware/fw_bcmdhd_p2p.bin
<4>[   62.446929] dhd_open: ifidx 0
<4>[   62.450225] 
<4>[   62.450225] Dongle Host Driver, version 1.15.3
<4>[   62.455871] wl_android_wifi_on in
<4>[   62.459106] =========== WLAN going back to live  ========
<6>[   62.521789] EXT4-fs (dm-3): re-mounted. Opts: (null)
<6>[   62.536529] EXT4-fs (dm-3): re-mounted. Opts: (null)
<3>[   62.667968] bcm432x_sdcc_wlan_slot_status: 34 1
<6>[   62.671600] mmc3: Slot status change detected (0 -> 1)
<4>[   62.868713] sdio_reset_comm():
<4>[   62.881927] DHD: dongle ram size is set to 294912(orig 294912)
<4>[   63.016235] Initial WLC_GET_AP value is [0]
<4>[   63.019927] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
<4>[   63.041625] dhd_preinit_ioctls set keeplive failed -1
<4>[   63.049285] dhd_preinit_config : config path : /data/misc/wifi/config 
<3>[   63.143585] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
<4>[   63.149932] p2p0: p2p_dev_addr=f2:1c:13:47:5f:7b
<7>[   63.259033] p2p0: no IPv6 routers present
<4>[   64.727600] wl_bss_connect_done succeeded
<4>[   64.814025] wl_bss_connect_done succeeded

Good Dmesg:
Code: 
<4>[  462.796112] dhd_open: firmware_path = /system/etc/firmware/fw_bcmdhd_p2p.bin
<4>[  462.802429] dhd_open: ifidx 0
<4>[  462.805175] 
<4>[  462.805175] Dongle Host Driver, version 1.15.3
<4>[  462.812408] send sigkill to 6021 (ogle.android.gm), adj 15, size 6630
<4>[  462.818267] wl_android_wifi_on in
<4>[  462.821350] =========== WLAN going back to live  ========
<3>[  463.036651] bcm432x_sdcc_wlan_slot_status: 34 1
<6>[  463.040283] mmc3: Slot status change detected (0 -> 1)
<4>[  463.253479] sdio_reset_comm():
<4>[  463.262115] Enter dhd_bus_start:
<4>[  463.323608] send sigkill to 6065 (viders.calendar), adj 15, size 5111
<4>[  463.441558] Initial WLC_GET_AP value is [0]
<4>[  463.444793] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
<4>[  463.471191] dhd_preinit_ioctls set keeplive failed -1
<4>[  463.478546] dhd_preinit_config : config path : /data/misc/wifi/config 
<4>[  463.486785] dhd_preinit_proc: Change Macaddr = F0:1C:13:47:5F:7B
<4>[  463.572692] Firmware version = wl0: Mar 16 2012 18:47:05 version 5.90.100.330 (WFD)
<3>[  463.580932] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
<4>[  463.586578] p2p0: p2p_dev_addr=f2:1c:13:47:5f:7b
<3>[  463.978820] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
<3>[  463.991424] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
<6>[  464.642242] msm_device_put:device speaker_stereo_rx_playback set 0
<6>[  464.647583] AMP OFF: voc_codec 0
<6>[  464.670349] msm_device_put:device handset_record_tx set 0
<6>[  464.674987] [pcm_out.c:pcm_out_release] release session id[1]
<4>[  465.379913] wl_bss_connect_done succeeded
<4>[  465.437927] wl_bss_connect_done succeeded
 
Just an FYI.. I've been troubleshooting this wireless nonsense. Compared kernel configs from working 10.2 builds with 11 word for word. I just recently installed a ROM that did not work last night but loaded adb while it was first booting. It may be a coincidence but the wifi that didn't work last night is now working. Nothing changed to the ROM just another clean wipe and trying to debug while it was installing/booting.

edit - /data/system/wpa_supplicant is a sym link to /data/misc/wifi which contains

config
entrophy.bin
p2p_supplicant.conf
sockets
softap.conf
wpa_supplicant.conf

sockets\ contains wlan0

Neph81 said:
So, I did some logs for the recent Wifi issue, but I have no clue, atm, how to fix it. Maybe another Dev can take a look at this as well.

Error to fix:
Code: 
[ 03-26 08:44:57.828   572:  765 E/WifiHW   ]

Unable to open connection to supplicant on "/data/system/wpa_supplicant/wlan0": No such file or directory



[ 03-26 08:44:57.848   572:  765 E/WifiMonitor ]

startMonitoring(wlan0) failed!



[ 03-26 08:44:57.848   572:  765 E/WifiStateMachine ]

Failed to setup control channel, restart supplicant
Proof that WPA Supplicant is still working:
Code: 
[ 03-26 08:45:06.577  1126: 1126 I/wpa_supplicant ]

wlan0: Associated with 08:60:6e:bb:68:e8



[ 03-26 08:45:06.597  1126: 1126 I/wpa_supplicant ]

wlan0: WPA: Key negotiation completed with 08:60:6e:bb:68:e8 [PTK=CCMP GTK=CCMP]



[ 03-26 08:45:06.597  1126: 1126 I/wpa_supplicant ]

wlan0: CTRL-EVENT-CONNECTED - Connection to 08:60:6e:bb:68:e8 completed (auth) [id=0 id_str=]
Good wifi:
Code: 
[ 03-26 09:14:29.089  6250: 6268 V/KeepAlert ]

Action android.net.wifi.WIFI_STATE_CHANGED



[ 03-26 09:14:29.179   649:  765 D/WifiConfigStore ]

Loading config and enabling all networks



[ 03-26 09:14:29.239   649:  765 E/WifiConfigStore ]

Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)



[ 03-26 09:14:29.329   147:  560 D/CommandListener ]

Setting iface cfg



[ 03-26 09:14:29.349   147:  560 D/CommandListener ]

Trying to bring up p2p0



[ 03-26 09:14:29.359   649:  764 D/WifiMonitor ]

startMonitoring(p2p0) with mConnected = true
Bad dmesg:
Code: 
<4>[   61.703826] =========== WLAN placed in RESET ========
<3>[   61.708679] bcm432x_sdcc_wlan_slot_status: 34 0
<6>[   61.712829] mmc3: Slot status change detected (1 -> 0)
<4>[   62.440795] dhd_open: firmware_path = /system/etc/firmware/fw_bcmdhd_p2p.bin
<4>[   62.446929] dhd_open: ifidx 0
<4>[   62.450225] 
<4>[   62.450225] Dongle Host Driver, version 1.15.3
<4>[   62.455871] wl_android_wifi_on in
<4>[   62.459106] =========== WLAN going back to live  ========
<6>[   62.521789] EXT4-fs (dm-3): re-mounted. Opts: (null)
<6>[   62.536529] EXT4-fs (dm-3): re-mounted. Opts: (null)
<3>[   62.667968] bcm432x_sdcc_wlan_slot_status: 34 1
<6>[   62.671600] mmc3: Slot status change detected (0 -> 1)
<4>[   62.868713] sdio_reset_comm():
<4>[   62.881927] DHD: dongle ram size is set to 294912(orig 294912)
<4>[   63.016235] Initial WLC_GET_AP value is [0]
<4>[   63.019927] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
<4>[   63.041625] dhd_preinit_ioctls set keeplive failed -1
<4>[   63.049285] dhd_preinit_config : config path : /data/misc/wifi/config 
<3>[   63.143585] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
<4>[   63.149932] p2p0: p2p_dev_addr=f2:1c:13:47:5f:7b
<7>[   63.259033] p2p0: no IPv6 routers present
<4>[   64.727600] wl_bss_connect_done succeeded
<4>[   64.814025] wl_bss_connect_done succeeded
Good Dmesg:
Code: 
<4>[  462.796112] dhd_open: firmware_path = /system/etc/firmware/fw_bcmdhd_p2p.bin
<4>[  462.802429] dhd_open: ifidx 0
<4>[  462.805175] 
<4>[  462.805175] Dongle Host Driver, version 1.15.3
<4>[  462.812408] send sigkill to 6021 (ogle.android.gm), adj 15, size 6630
<4>[  462.818267] wl_android_wifi_on in
<4>[  462.821350] =========== WLAN going back to live  ========
<3>[  463.036651] bcm432x_sdcc_wlan_slot_status: 34 1
<6>[  463.040283] mmc3: Slot status change detected (0 -> 1)
<4>[  463.253479] sdio_reset_comm():
<4>[  463.262115] Enter dhd_bus_start:
<4>[  463.323608] send sigkill to 6065 (viders.calendar), adj 15, size 5111
<4>[  463.441558] Initial WLC_GET_AP value is [0]
<4>[  463.444793] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
<4>[  463.471191] dhd_preinit_ioctls set keeplive failed -1
<4>[  463.478546] dhd_preinit_config : config path : /data/misc/wifi/config 
<4>[  463.486785] dhd_preinit_proc: Change Macaddr = F0:1C:13:47:5F:7B
<4>[  463.572692] Firmware version = wl0: Mar 16 2012 18:47:05 version 5.90.100.330 (WFD)
<3>[  463.580932] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
<4>[  463.586578] p2p0: p2p_dev_addr=f2:1c:13:47:5f:7b
<3>[  463.978820] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
<3>[  463.991424] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
<6>[  464.642242] msm_device_put:device speaker_stereo_rx_playback set 0
<6>[  464.647583] AMP OFF: voc_codec 0
<6>[  464.670349] msm_device_put:device handset_record_tx set 0
<6>[  464.674987] [pcm_out.c:pcm_out_release] release session id[1]
<4>[  465.379913] wl_bss_connect_done succeeded
<4>[  465.437927] wl_bss_connect_done succeeded
Click to expand...
 
This is my output from ifconfig wlan0 down/up. CM11 source built with a 10.2 defconfig. SELinux is enforcing or permissive.

<4>[ 1155.772827] wl_android_wifi_off in
<4>[ 1155.784881] =========== WLAN placed in RESET ========
<3>[ 1155.792724] bcm432x_sdcc_wlan_slot_status: 34 0
<6>[ 1155.796325] mmc3: Slot status change detected (1 -> 0)
<4>[ 1156.935913] QSEECOM: qseecom_release: data->released == false
<3>[ 1157.180908] smd_pkt_open: DATA12_CNTL open failed -19
<3>[ 1157.189422] smd_pkt_open: DATA13_CNTL open failed -19
<3>[ 1157.197052] smd_pkt_open: DATA14_CNTL open failed -19
<4>[ 1158.637512] dhd_open: ifidx 0
<4>[ 1158.641387]
<4>[ 1158.641418] Dongle Host Driver, version 1.15.3
<4>[ 1158.646972] wl_android_wifi_on in
<4>[ 1158.658172] =========== WLAN going back to live ========
<3>[ 1158.889373] bcm432x_sdcc_wlan_slot_status: 34 1
<6>[ 1158.892944] mmc3: Slot status change detected (0 -> 1)
<4>[ 1159.090301] sdio_reset_comm():
<4>[ 1159.107208] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 1159.237365] Initial WLC_GET_AP value is [0]
<4>[ 1159.241088] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
<4>[ 1159.259948] dhd_preinit_ioctls set keeplive failed -1
<4>[ 1159.267517] dhd_preinit_config : config path : /data/misc/wifi/config
<3>[ 1159.353851] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
<4>[ 1159.360443] p2p0: p2p_dev_addr=02:aa:70:bd:ac:e6
root@vs920:/ # cd /data/misc/wifi/config
sh: cd: /data/misc/wifi/config: Not a directory
2|root@vs920:/ # cat /data/misc/wifi/config
cur_etheraddr=00:aa:70:bd:ac:e6
root@vs920:/ #
 
I like where you're going with this. On my current build (not the most recent sync) /data/system/wpa_supplicant/ is a link to /data/misc/wifi/wpa_supplicant/, which itself does not exist. As you pointed out /data/misc/wifi/sockets/ does contain wlan0 when the wifi is turned on. This may just be a simple issue of changing what sets that link on our builds. I'll try and look into this tonight.

Edit : can anyone on the new builds with bad wifi get me one line of information from the file /data/misc/wifi/wpa_supplicant.conf ? I need to know what your line ctrl_interface says. Mine correctly points to /data/misc/wifi/sockets . Please do not paste the full file as your wifi settings and passwords are also in this file.

Edit 2 : And I think I found the culprit that is doing the funky link. Still not sure why CM changed their wpa_suppicant code though. Anyways, init.iprj.rc has this line:

#Create the symlink to qcn wpa_supplicant folder for ar6000 wpa_supplicant
mkdir /data/system 0775 system system
symlink /data/misc/wifi/wpa_supplicant /data/system/wpa_supplicant

Changing the first part to /data/misc/wifi/sockets "should" fix the issue. I'll do a build, and if it does fix the issue, I'll be pushing the fix to CM.
 
So, here's where I'm at now. After manually removing the old link, the new link generated corrected. Wifi turns on, but it does not scan or connect to any networks. It's a step, but it's a small step. I'm half tempted to manually replace the wpa_supplicant binary and see what happens.

Code: 
[ 03-27 00:01:58.821  2469: 2469 I/wpa_supplicant ]
Successfully initialized wpa_supplicant

[ 03-27 00:01:59.562   545:  581 D/Tethering ]
sendTetherStateChangedBroadcast 1, 0, 0

[ 03-27 00:01:59.852   545:  633 D/WifiConfigStore ]
Loading config and enabling all networks

[ 03-27 00:01:59.852   545:  633 E/WifiConfigStore ]
Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)

[ 03-27 00:01:59.852   545:  633 E/WifiStateMachine ]
Failed to set device name i_vzw

[ 03-27 00:01:59.862   545:  633 E/WifiStateMachine ]
Failed to set manufacturer LGE

[ 03-27 00:01:59.862   545:  633 E/WifiStateMachine ]
Failed to set model name VS920 4G

[ 03-27 00:01:59.862   545:  633 E/WifiStateMachine ]
Failed to set model number VS920 4G

[ 03-27 00:01:59.872   545:  633 E/WifiStateMachine ]
Failed to set serial number 3bec6c

[ 03-27 00:01:59.872   545:  633 E/WifiStateMachine ]
Failed to set WPS config methods

[ 03-27 00:01:59.872   545:  633 E/WifiStateMachine ]
Failed to set primary device type 10-0050F204-5

[ 03-27 00:01:59.892   148:  532 D/CommandListener ]
Setting iface cfg

[ 03-27 00:01:59.892   148:  532 D/CommandListener ]
Trying to bring up p2p0

[ 03-27 00:01:59.902   545:  632 D/WifiMonitor ]
startMonitoring(p2p0) with mConnected = true

[ 03-27 00:01:59.982   545:  633 E/WifiStateMachine ]
Failed to set country code US

[ 03-27 00:01:59.982   545:  633 E/WifiStateMachine ]
Failed to set frequency band 0

[ 03-27 00:02:00.473   545:  557 I/ActivityManager ]
START u0 {act=android.settings.SETTINGS flg=0x14000000 cmp=com.android.settings/.Settings} from pid 651

[ 03-27 00:02:00.713   545:  556 D/WifiService ]
setWifiEnabled: true pid=1831, uid=1000
 
I've been doing so many different builds I don't even know where I'm at now.. Mainly I'm trying to compare differences between 10.1, 10.2 and 11.0 which is why I'm all over the place.. I think I'll do a make clean, sync the repo's and start with a fresh cm 11 again. I've been focused on kernel differences but they're definitely no changes from 10.2 to 11.0. It was strange to me that SELinux went from Permissive to Enforcing but I guess that's in the prop somewhere and my focus has been in the wrong place.

My issue seems to be the firmware driver isn't loading. It displays the firmware message but doesn't include the file name like I've seen in other dmesg's on pastebin's. Neph what is your exact hardware? On the inside label mine says LG-VS920 H/W REV 1.2. Does that mean it's board revision B? Last kernel I compiled enabled boards A/B/C so I don't think that makes a difference.. There are more options which aren't compiled under MSM Board Selection that may or may not make a difference but I think this is purely CM11 file/dir/sym/permission error.

I'll restart my build now and paste the output of the wifi later.

Also where did you pull the proprietary blobs from? I'm using death2all's repo right now.
 
Neph81 said:
I like where you're going with this. On my current build (not the most recent sync) /data/system/wpa_supplicant/ is a link to /data/misc/wifi/wpa_supplicant/, which itself does not exist. As you pointed out /data/misc/wifi/sockets/ does contain wlan0 when the wifi is turned on. This may just be a simple issue of changing what sets that link on our builds. I'll try and look into this tonight.

Edit : can anyone on the new builds with bad wifi get me one line of information from the file /data/misc/wifi/wpa_supplicant.conf ? I need to know what your line ctrl_interface says. Mine correctly points to /data/misc/wifi/sockets . Please do not paste the full file as your wifi settings and passwords are also in this file.

Edit 2 : And I think I found the culprit that is doing the funky link. Still not sure why CM changed their wpa_suppicant code though. Anyways, init.iprj.rc has this line:

#Create the symlink to qcn wpa_supplicant folder for ar6000 wpa_supplicant
mkdir /data/system 0775 system system
symlink /data/misc/wifi/wpa_supplicant /data/system/wpa_supplicant

Changing the first part to /data/misc/wifi/sockets "should" fix the issue. I'll do a build, and if it does fix the issue, I'll be pushing the fix to CM.
Click to expand...


I'm tracing some files trying to put 2&2 together. These two lines are in vs920.mk
$(call inherit-product, device/lge/iprj-common/iprj.mk)
$(call inherit-product-if-exists, vendor/lge/vs920/vs920-vendor.mk)

root@debian6:~/android/system/device/lge/iprj-common# ls
Android.mk cmhw firmware_init init.iprj-common.rc liblights power sepolicy
audio config hwaddrs init.iprj.usb.rc NOTICE prebuilt ueventd.iprj.rc
BoardConfigCommon.mk egl.cfg include iprj.mk overlay recovery-gfx.c vnd_bt.txt

#via iprj.mk
# WiFi
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/config/wpa_supplicant.conf:system/etc/wifi/wpa_supplicant.conf

#But the common file in the device directory loads the config file from /data/misc/wifi/wpa_supplicant.conf..
#via init.iprj-common.rc
service wpa_supplicant /system/bin/wpa_supplicant \
-iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \
-O/data/misc/wifi/sockets \
-e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0
# we will start as root and wpa_supplicant will switch to user wifi
# after setting up the capabilities required for WEXT
# user wifi
# group wifi inet keystore
class main
socket wpa_wlan0 dgram 660 wifi wifi
disabled
oneshot

#via config/wpa_supplicant.conf
update_config=1
ctrl_interface=wlan0
eapol_version=1
ap_scan=1
fast_reauth=1
 
Ok here's my latest using a fresh 11 defconfig and I altered the correct symlink to point to /data/misc/wifi/sockets. The wifi loads but it hangs at searching for networks.

<3>[ 450.356170] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wl_cfg80211_netdev_notifier_call : [NETDEV_DOWN] work_pending (0 th)
<4>[ 451.433868] net_ratelimit: 1 callbacks suppressed
<4>[ 451.437744] dhd_stop: Enter
<4>[ 451.440429] wl_android_wifi_off in
<4>[ 451.450408] =========== WLAN placed in RESET ========
<3>[ 451.458801] bcm432x_sdcc_wlan_slot_status: 34 0
<6>[ 451.462463] mmc3: Slot status change detected (1 -> 0)
<6>[ 452.984222]
<6>[ 452.984252] Trip point triggered by current temperature (48 degrees) measured by Temperature-Sensor 0
<6>[ 453.984344]
<6>[ 453.984344] Trip point triggered by current temperature (48 degrees) measured by Temperature-Sensor 0
<6>[ 455.984313]
<6>[ 455.984313] Trip point triggered by current temperature (50 degrees) measured by Temperature-Sensor 0
<4>[ 456.135070] dhd_open: firmware_path = /system/etc/firmware/fw_bcmdhd_p2p.bin
<4>[ 456.143310] dhd_open: ifidx 0
<4>[ 456.145385]
<4>[ 456.145416] Dongle Host Driver, version 1.15.3
<4>[ 456.152770] wl_android_wifi_on in
<4>[ 456.155334] =========== WLAN going back to live ========
<3>[ 456.364257] bcm432x_sdcc_wlan_slot_status: 34 1
<6>[ 456.367858] mmc3: Slot status change detected (0 -> 1)
<4>[ 456.573547] sdio_reset_comm():
<4>[ 456.585052] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 456.733001] Initial WLC_GET_AP value is [0]
<4>[ 456.736328] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
<4>[ 456.769622] dhd_preinit_ioctls set keeplive failed -1
<4>[ 456.780090] dhd_preinit_config : config path : /data/misc/wifi/config
<4>[ 456.786163] dhd_preinit_proc: Change Macaddr = 00:AA:70:BD:AC:E6
<4>[ 456.878326] Firmware version = wl0: Mar 16 2012 18:47:05 version 5.90.100.330 (WFD)
<3>[ 456.888946] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
<4>[ 456.896179] p2p0: p2p_dev_addr=02:aa:70:bd:ac:e6
<4>[ 457.307800] dhd_ioctl_entry: ifidx 0, cmd 0x89f1
<3>[ 457.312927] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
<3>[ 457.322540] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 0
<6>[ 458.984619]
<6>[ 458.984649] Trip point triggered by current temperature (48 degrees) measured by Temperature-Sensor 0
<6>[ 459.984649]
<6>[ 459.984680] Trip point triggered by current temperature (48 degrees) measured by Temperature-Sensor 0
<7>[ 467.402740] p2p0: no IPv6 routers present
root@vs920:/ #

logcat already having wifi disabled

E/WifiStateMachine( 654): Timed out on a supplicant stop, kill and proceed
D/BluetoothAdapter( 3362): 1101013344: getState() : mService = null. Returning STATE_OFF
D/WifiService( 654): setWifiEnabled: true pid=3362, uid=1000
D/SoftapController( 146): Softap fwReload - Ok
D/CommandListener( 146): Setting iface cfg
D/CommandListener( 146): Trying to bring down wlan0
I/wpa_supplicant( 4355): Successfully initialized wpa_supplicant
D/WifiMonitor( 654): startMonitoring(wlan0) with mConnected = false
E/WifiHW ( 654): Unable to open connection to supplicant on "/data/system/wpa_supplicant/wlan0": No such file or directory
D/BluetoothAdapter( 3362): 1101013344: getState() : mService = null. Returning STATE_OFF
D/Tethering( 654): sendTetherStateChangedBroadcast 1, 0, 0
D/MobileDataStateTracker( 654): default: setPolicyDataEnable(enabled=true)
D/BluetoothAdapter( 3362): 1101013344: getState() : mService = null. Returning STATE_OFF
D/WifiConfigStore( 654): Loading config and enabling all networks
E/WifiConfigStore( 654): Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)
E/WifiStateMachine( 654): Failed to set device name i_vzw
E/WifiStateMachine( 654): Failed to set manufacturer LGE
E/WifiStateMachine( 654): Failed to set model name VS920 4G
E/WifiStateMachine( 654): Failed to set model number VS920 4G
E/WifiStateMachine( 654): Failed to set serial number 6173bc
E/WifiStateMachine( 654): Failed to set WPS config methods
E/WifiStateMachine( 654): Failed to set primary device type 10-0050F204-5
D/CommandListener( 146): Setting iface cfg
D/CommandListener( 146): Trying to bring up p2p0
D/WifiMonitor( 654): startMonitoring(p2p0) with mConnected = true
E/WifiStateMachine( 654): Failed to set country code US
E/WifiStateMachine( 654): Failed to set frequency band 0



so 2 things to note. wlan0 does exist in /data/system/wpa_supplicant. it is the symlink and owned by user wifi group wifi. /data/misc/wifi/ipconfig.txt does not exist.. i'm assuming it should have dhcp options in it?

al /data/system/wpa_supplicant/ <
srwxrwx--- wifi wifi 2014-03-27 19:31 p2p0
srwxrwx--- wifi wifi 2014-03-27 19:31 wlan0
srw-rw---- system wifi 2014-03-27 19:31 wpa_ctrl_654-11
srw-rw---- system wifi 2014-03-27 19:31 wpa_ctrl_654-12
 
Here's something else that's interesting.. Switching on the wireless hotspot it looks to load mon.wlan0 but fails to find it defaulting to wlan0

<4>[ 1076.045867] DHD-MON: dhd_add_monitor enter, if name: mon.wlan0
<4>[ 1076.055267] DHD-MON: dhd_add_monitor net device returned: 0xd68f2000
<4>[ 1076.060760] DHD-MON: dhd_add_monitor found a matched net device, name wlan0
<4>[ 1076.070159] DHD-MON: dhd_mon_if_open enter
<4>[ 1076.113067] dhd_open: firmware_path = /system/etc/firmware/fw_bcmdhd_apsta.bin
<4>[ 1076.119415] dhd_open: ifidx 0
<4>[ 1076.122283]
<4>[ 1076.122283] Dongle Host Driver, version 1.15.3
<4>[ 1076.132659] wl_android_wifi_on in
<4>[ 1076.135009] =========== WLAN going back to live ========
<3>[ 1076.350036] bcm432x_sdcc_wlan_slot_status: 34 1
<6>[ 1076.353698] mmc3: Slot status change detected (0 -> 1)
<4>[ 1076.550323] sdio_reset_comm():
<4>[ 1076.565093] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 1076.701141] Initial WLC_GET_AP value is [0]
<4>[ 1076.704956] Firmware up: op_mode=2, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
<4>[ 1076.729217] dhd_preinit_ioctls set keeplive failed -1
<4>[ 1076.755554] dhd_preinit_config : config path : /data/misc/wifi/config
<4>[ 1076.761230] dhd_preinit_proc: Change Macaddr = 00:AA:70:BD:AC:E6
<4>[ 1076.855468] Firmware version = wl0: Mar 16 2012 18:45:15 version 5.90.100.330 (SoftAP)
<3>[ 1076.864227] CFG80211-ERROR) wl_cfg80211_up : WLC_GET_VERSION=1
<3>[ 1076.869781] CFGP2P-ERROR) wl_cfgp2p_supported : wl p2p error -23
<3>[ 1076.966186] CFG80211-ERROR) wl_cfg80211_add_set_beacon : wl_cfg80211_add_set_beacon closednet 0
<3>[ 1077.242858] qtaguid: iface_stat: stat_update() mon.wlan0 not found
<3>[ 1077.248199] qtaguid: iface_stat: stat_update() mon.wlan0 not found
<4>[ 1077.254455] DHD-MON: dhd_mon_if_subif_start_xmit enter
<3>[ 1085.902770] qtaguid: iface_stat: stat_update() mon.wlan0 not found
<3>[ 1085.908142] qtaguid: iface_stat: stat_update() mon.wlan0 not found
<4>[ 1085.914276] DHD-MON: dhd_mon_if_subif_start_xmit enter

And of course, you guess it, the hotspot works. :)

The above dmesg doesn't spit out the wldev errors about setting the US channels.. My guess is that's the problem with the wifi vs hotspot ap ?
 
I'm reading this thread but it isn't helping..

https://code.google.com/p/cm9-wildfire-s/issues/detail?id=5

Other people in the past experienced this issue and added the country code to the SQL database manually. I'm doing the same but it hasn't had an affect. I can confirm 1 thing.. In wifi options on the phone, when I set the region it updates the global table located in

/data/data/com.android.providers.settings/databases/settings.db

It's not updating the secure table but I forgot to check if that value even existed before I added it in via the thread suggestions.

But still, even though it writes to the global table, I still get an error in logcat. I can only imagine this is a permission issue still.. Where the wifi service can't read from the database maybe?

I/WifiService( 579): WifiService trying to set country code to US with persist set to true
E/WifiStateMachine( 579): Failed to set country code US
 
Very cool ill check back to see how you make out. Last thing I thought was weird were 2 wpa_supplicant.Conf files.. I think

/system/etc/wifi
/data/misc/wifi

Both have different options I assume for mobile hotspot but im pretty sure they would use the same driver and socket still
 
Forgot to add.. I've never had working wifi on any kk based rom.. Cm11, pac rom.. Thats why I asked about the hardware. I figured since the first nightly it was due to selinux and id let them work out the bugs and mature a little bit.
 
allenelson said:
I've been doing so many different builds I don't even know where I'm at now.. Mainly I'm trying to compare differences between 10.1, 10.2 and 11.0 which is why I'm all over the place.. I think I'll do a make clean, sync the repo's and start with a fresh cm 11 again. I've been focused on kernel differences but they're definitely no changes from 10.2 to 11.0. It was strange to me that SELinux went from Permissive to Enforcing but I guess that's in the prop somewhere and my focus has been in the wrong place.

My issue seems to be the firmware driver isn't loading. It displays the firmware message but doesn't include the file name like I've seen in other dmesg's on pastebin's. Neph what is your exact hardware? On the inside label mine says LG-VS920 H/W REV 1.2. Does that mean it's board revision B? Last kernel I compiled enabled boards A/B/C so I don't think that makes a difference.. There are more options which aren't compiled under MSM Board Selection that may or may not make a difference but I think this is purely CM11 file/dir/sym/permission error.

I'll restart my build now and paste the output of the wifi later.

Also where did you pull the proprietary blobs from? I'm using death2all's repo right now.
Click to expand...
Sorry that I missed this post earlier. My phone is H/W Rev : 1.2

I have my own git repos that I cloned from D2A and then started doing my own tweaks.
https://github.com/Neph81?tab=repositories

If you use my blobs and the official repositories from CM, you'll have an issue where it won't pull libtime_genoff.so correctly. When it errors out, just manually copy the file to where it say it can't find a way to build it. It's something to do with the way RMCC does the rtc time fix vs the way I do the rtc time fix.
 
That damned lib_time issue.. Hit that a while back I always symlink it before I build if necessary. It's funny I have a running list of "things to patch and link before compiling" on hand..

Sorry to cross post. That CM-11-20140314 nightly you posted in the other thread.. Wifi works for me in this image as you probably expected, but I can tell by the kernel name and SELinux this is probably still a custom image you built, correct?

CM-11 has been enforced for me since day one on the vs920.. I've noticed this image is Permissive. I don't know why but I'm really hung up on selinux being an issue. It's funny too in the image I built last night, disabling SELinux made a lot of errors disappear even though the wifi still didn't work.

I'm far from a developer but definitely a Cisco engineer. If an AP can't set it's region/band it won't know what channels or frequencies to operate on and definitely cause wifi to fail. symlinks/init.rc/firmware/config file location aside, this definitely seems to be a security restriction where the channels/band aren't set because the system isn't loading the driver and socket due to permission. I'm basing that off of the first nightly's that came out Enforcing and the reason I chose to stick with 10.1 until now.
 
allenelson said:
That damned lib_time issue.. Hit that a while back I always symlink it before I build if necessary. It's funny I have a running list of "things to patch and link before compiling" on hand..

Sorry to cross post. That CM-11-20140314 nightly you posted in the other thread.. Wifi works for me in this image as you probably expected, but I can tell by the kernel name and SELinux this is probably still a custom image you built, correct?

CM-11 has been enforced for me since day one on the vs920.. I've noticed this image is Permissive. I don't know why but I'm really hung up on selinux being an issue. It's funny too in the image I built last night, disabling SELinux made a lot of errors disappear even though the wifi still didn't work.

I'm far from a developer but definitely a Cisco engineer. If an AP can't set it's region/band it won't know what channels or frequencies to operate on and definitely cause wifi to fail. symlinks/init.rc/firmware/config file location aside, this definitely seems to be a security restriction where the channels/band aren't set because the system isn't loading the driver and socket due to permission. I'm basing that off of the first nightly's that came out Enforcing and the reason I chose to stick with 10.1 until now.
Click to expand...
Yes, my builds are a bit of a custom thing, as D2A did different work than the official repos, that TDM and RMCC, handle. I also add in some memory tweaks and other fixes, to speed up the phone. As for your SE question, any userdebug build should automatically set for permissive. It's not until you do a normal build, that SE should default to enforcing.

As for my build last night, no dice, but I'm off from work today, so I have more time to look into things.
 
Yes please. I'm running out of things to try. I can get wifi to run, but it won't scan. The wpa_supplicant is identical in both my good and bad builds and it appears the wpa_cli is as well.
 
aaronp121 said:
I installed latest 04-07 and wifi still won't turn on.
Click to expand...
Wifi wasn't fixed until last night. The 4/9 build should have the fix in it. Also, it's entire possible that you may need to do a full reset of the device, if it doesn't fix itself after the first install.
 
Lol I've given up on the spectrum.. I use a razr maxx for work I just bought a used one until they come out with a better choice of new phones to select from..

Neph you mess around at all with USB audio? To be honest, that's what got me into all this building crap.. I've got an iSimple gateway installed in my truck, my goal was to use a female 30 pin dock to male micro usb to charge and play audio through the thing. Mission failed though.. or at least for now. Honestly I didn't put in all that much effort but new phones are starting to add more support with micro 3.0 anyway so I dunno if it's worth the hassle anymore.
 
Today's ROM 04-09 something different from 04-07 ROM. Installed without gapps. Did reset and dalvik before flashing after download today's ROM.
The good: Wifi works and connected to unsecured wifi. Not tested with secured wifi.
The bad: too slow interface in desktop (Home) and slow scrolling except inside apps scroll listing faster. Because of bad launcher? After 4 minutes and launcher performs okay.
Last ROM 04-07 installed without gapps and was smooth after reboot. I don't need gapps because I use it for wifi tethering.
 
You must log in or register to reply here.
Back
Top Bottom