-
After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
Help PDANet for Samsung Charge
- Thread starter stevemi
- Start date
-
- Tags
- samsung droid charge
wolfaltman
Lurker
Am just about to upgrade from original Droid where I used PDAnet (it worked great) and was wondering if you were able got the Samsung Charge to work with PDAnet.
I FIGURED IT OUT!!!
At first on my one computer I trying to get pdanet to work but failing, I had installed the software that would install from the phone itself. DO NOT DO THIS! Do not install software or drivers from the phones memory.
All you do is plugin the samsung droid charge into the computer and wait a few moments for windows to recognize it.
Go into the device manager on your computer;I always right click on computer under start menu then click properties. Then when the new window apears click on Device Manager on the top left side.
In Device Manager, find where the android phone is shown, mine showed under devices. right click the android device shown under devices and click update driver software.
After it succesfully updates, now you can start fresh and install pdanet. When its installing and it asks the type of phone, select other. Then when it asks for permission to install drivers that are not supported, DECLINE (I had to decline twice) But defintly decline the driver install.
Then with your phone set to debugging mode plug in your usb to the computer and phone and it should immediately finish installing the software and complete the normal process.
Good luck! Sorry if this is not clear. It worked perfectly for me with my steps I listed. I LOVE THE Samsung Droid Charge!!!
RustySkoog
Lurker
I'm going to try this out later today and let everyone know if I can replicate John83777'shttp://androidforums.com/members/john83777.html success.
Thanks John83777. To make things a little more clear if people are not yet aware, there is a missing step. Have PDANet installed on your computer. Look in program folder and find reinstall PDAnet to android phone. On the phone side simply go into Applications - Settings - Applications - Development. Once in Development engage USB Debugging (not on by default). I had Device Manager up and running when I plugged the usb cable back into the phone. The interface shown in Windows 7 Pro is: ADB Interface. Once it self installed itself and set its drivers, I ran reinstall PDAnet to phone. Works like a champ. VERIZON said it COULD NOT be done. There system was set to recognize and block PDA. Works great, and get faster throughput than verizon's tether for some reason.
I have a wifi ipad2 and am thinking about getting a droid charge from verizon and then trying to install pdanet as described above on the charge. Does anyone know if I could use the droid charge as a hotspot for the ipad2? the descriptions above seem to imply people were using the droid charge as hotspot for a laptop. I wonder if the setup requires a laptop? I do have an old macbook pro (2008) and an old pc laptop (2006). thanks in advance for any guidance.
saltyorange
Lurker
It still is not working for me. I cannot even get PDAnet installed on my laptop without the process complaining about the USB driver installation not completing. Looking at the PDANet website, it says to install the Samsung USB driver. THe website even has a link....though it is a broken link. That is helpful. 
saltyorange
Lurker
It still is not working for me. I cannot even get PDAnet installed on my laptop without the process complaining about the USB driver installation not completing. Looking at the PDANet website, it says to install the Samsung USB driver. THe website even has a link....though it is a broken link. That is helpful.
When in Device Manager, I need to look for the Samsung Android ADB Interface under Other Devices. Once I found it there, I was able to right-click and tell it update the driver. Once it did that, I could follow the instructions of the poster above and get PDANet to work.
wolfaltman
Lurker
I figured this out by accident -- turn off the USB Debugging on the Droid and connect the Charge via a USB cable to the PC. Open the new drive under the Directory on your PC and you will see a folder that contains the Samsung Drivers. Install the drivers. Then try to install PDANet. (Don't forget to turn on USB Debugging.)
It worked for me.
It worked for me.
ItsAboutTime
Newbie
PDANet would normally tether a Droid Charge to computers via a micro USB to USB wire (I think), and the Ipads do not have a USB connector. However, you can buy a USB to Ipad adaptor. Nonetheless, my wild guess is that the Ipad may need to be jail broken in order to accept the input through the wire, which then voids your Ipad warranty. You can't use PdaNet with an Iphone without jail breaking the Iphone and voiding its warranty, and I am guessing the same is true with an Ipad. Let us know what you find out.
Another alternative is to use the free one month(?) hot spot capability for your Droid Charge and then pay Verizon the subscription price for the mobile hotspot capability for your Droid Charge going forward, in which case your Droid Charge would send a wireless wifi signal to your Ipad, laptops and other wifi enabled devices no problem. No jailbreaking of your Ipad is necessary. I have a friend whose company buys him a pocket size wifi broadcaster device that receives original signal through 3G, and then broadcasts wifi just fine to his Ipad and laptops. Your Droid Charge will do the same thing: serve as a hotspot wifi broadcaster for multiple devices with a subscription fee.
If you are having problems with the driver step for the Charge then go and download it manually from here: http://www.junefabrics.com/android/driver.php
Choose the middle one (Samsung) and you should be good to go after the install of the driver. Now just install PDAnet and follow the directions that the op had (notably, choose other when prompted for a device). When it tells you to connect, follow directions for debugging and do it. Everything should be good to go.
Thanks everyone for the previous posts. Could not have figured it out without you.
Choose the middle one (Samsung) and you should be good to go after the install of the driver. Now just install PDAnet and follow the directions that the op had (notably, choose other when prompted for a device). When it tells you to connect, follow directions for debugging and do it. Everything should be good to go.
Thanks everyone for the previous posts. Could not have figured it out without you.
I just got the Samsung Charge today and have been tring to get pdanet to work for about 2 hours. Mine can't find the drivers either. Below is a link ot the drivers that got listed as of 06-17-11 by Samsung
Samsung
I've been waiting on them to install now for about 40 minutes. They are taking forever. I hope pdanet works after this.
Samsung
I've been waiting on them to install now for about 40 minutes. They are taking forever. I hope pdanet works after this.
Don't know why everyone is having so much trouble.. mine just came up and flew.. I have it tethered both by usb or bluetooth..
Unfortunatly I don't remember the order I did things..On an xp machine
Installed a couple of days ago..Fantastic app
OK....had to reinstall pdanet. That got me a working device. Then I had to disable bluetooth on the phone end to get the connection to work. But now I'm typing this on my laptop tethered to my Charge. Yay!
