Root [Public Mobile] Can anyone send me a QCN file (NV backup) that have RF/radio calibration data for Public Mobile?

[kocoman]

Can anyone send me a QCN file (NV backup) that have RF/radio calibration data for Public Mobile?

I have a boost mobile phone N860 that I am able to enable the Band Class 14 via editing of rf_bc_config, but without the RF calibration data it can't find the network.

thanks

 

[junkie2100]

you sure a prl wouldnt fix it?

 

[kocoman]

The Band Class 14 is not enabled on the Boost Mobile N860. I compared the N762 public mobile NV item rf_bc_config, and put that value into the Boost Mobile NV, then it starts to scan for BC14 using a public mobile PRL.

If I just put the public mobile PRL without this change in the rf_bc_config, the Band Class 14 is not scanned, I can see in QXDM (status (Dynamic view))

The error/unknown things are:

2013 Oct 29 08:04:32.707 [10] 0x1FEB Extended Debug Message
rfcommon_core_error.c 56 E RF library error occurred in file /home/tanbaihua/N860/AMSS_b18/products/7x30/modem/rfa/rf/1x/rf/core/src/r***c_mm_cdma1x.c at line 3869

Drop count = 0

2013 Oct 29 08:04:32.712 [10] 0x1FEB Extended Debug Message
rtr8600_1x.c 2395 H RTR band: 12 is not set yet, must call rtr8600_1x_enable_rx() for the correct band before setting linearity

Drop count = 0

2013 Oct 29 08:04:32.712 [10] 0x1FEB Extended Debug Message
rfm_1x.c 109 H In rfm_init_digital_band_chan for device=0 band=14, chan=1250

Drop count = 0

2013 Oct 29 08:04:32.712 [10] 0x1FEB Extended Debug Message
rf_mm_cdma1x.c 6043 M rf_digital_band_change device=0, band=14

I am not sure what below is, its not found in the amss.bin

2013 Oct 29 08:04:33.475 [1A] 0x1FEB Extended Debug Message
sprintdiag.c 2473 H Hello world from SPRINT Test App.270938

Drop count = 0

 

[smartmanvartan]

You can just flash the Public mobile stock Rom. It contains the b08 firmware, boot loader and radio. You can flash the firmware package that's is in the first post of the voltron Rom assuming you already have flashed a public mobile meid... if you need the backup tho I can provide you with one but the band configuration is done in the amss.mbn... good luck let me know how it all goes..

 

[kocoman]

I sent you a PM but I don't think you want to send the file

Hi can you send me the QCN file? I want to try that before flashing amss.mbn, thanks

 

[smartmanvartan]

I sent you a PM but I don't think you want to send the file

Hi can you send me the QCN file? I want to try that before flashing amss.mbn, thanks

I haven't had the time to make a backup... a qcn backup contains the meid and I have to edit it then give you the backup but you will have to reflash the meid from your n762 afterwards... remember you have to also change the spc to match the default one associated with the meid for activation purposes...