whoshotjr2006
Android Enthusiast
Hey guys, damn that was hard. I'm running something you aren't, lets fix that! After working for about a 8 hours straight at it, I got philz building from source and booting!
disclaimer: what you do with what I provide is your responsibility. if what I made messes up your phone, its on you not on me. So with that said, I will do what I can to help you recover, but its ultimately your fault if something breaks.
I booted it up and everything seems to be working, flash it just like you flash clockworkmod recovery.
fastboot flash recovery philzvolt_bumped.img
BUGS:
Radio does not work when installing from rom zip (working on it)
One BIG difference from cwm is how long you hold power and the volume down button until it boots. After you fastboot flash it, pull your battery (or however you want to power off completely) and hold volume down and power. LET GO OF POWER AS SOON AS YOU SEE THE "FACTORY RESET PROCESSING" SCREEN! THIS IS AN ABSOLUTE MUST OR PHILZ WONT BOOT, IT WILL JUST TURN OFF! After first boot, just use an app inside android to reboot to recovery, I personally use APM+ and xposed:http://forum.xda-developers.com/xposed/modules/advanced-power-menu-apm-t2842792
I need someone to tell me if backups work, and also restore. Preferably someone who has a good cwm backup just in case, isnt worried about losing stuff, and knows how to restore using the LG restore tool. Lemme know in this thread how it goes.
Sources:
https://github.com/chevanlol360/Kernel_LGE_X5 (Thanks to chevanlol360 for fixing kernel source, if there is any problem with me using your source please let me know and ill figure something out. I just have no clue when it comes to kernel stuff, and your sources were an amazingly big help. Gonna try to base this off stock zv4 kernel in the future.)
The next sources were very heavily based off of Quarx's, Zaaap's, and Shinobisoft's work for similar devices on github. Find them somewhere and buy em a beer if you like what you see!
https://github.com/Quarx2k
https://github.com/Zaaap
https://github.com/shinobisoft
my sources:
https://github.com/touchpro?tab=repositories
And finally, the Philz Volt download here:
http://www.mediafire.com/download/2pbkhl06lj5rg58/philzvolt_bumped.img
Find something wrong? send me bug reports. Just post em up in this thread. Good ones are dmesg and adb logs.
And yes, I am working on getting CM11 compiling. Dont expect too much. I have a stupidly slow laptop and thats a lot more work than this was. If anyone wants to help, my sources are posted above, just throw down on it and make sure you post your updated device and vendor tree for the benefit of the whole community here.
disclaimer: what you do with what I provide is your responsibility. if what I made messes up your phone, its on you not on me. So with that said, I will do what I can to help you recover, but its ultimately your fault if something breaks.
I booted it up and everything seems to be working, flash it just like you flash clockworkmod recovery.
fastboot flash recovery philzvolt_bumped.img
BUGS:
Radio does not work when installing from rom zip (working on it)
One BIG difference from cwm is how long you hold power and the volume down button until it boots. After you fastboot flash it, pull your battery (or however you want to power off completely) and hold volume down and power. LET GO OF POWER AS SOON AS YOU SEE THE "FACTORY RESET PROCESSING" SCREEN! THIS IS AN ABSOLUTE MUST OR PHILZ WONT BOOT, IT WILL JUST TURN OFF! After first boot, just use an app inside android to reboot to recovery, I personally use APM+ and xposed:http://forum.xda-developers.com/xposed/modules/advanced-power-menu-apm-t2842792
I need someone to tell me if backups work, and also restore. Preferably someone who has a good cwm backup just in case, isnt worried about losing stuff, and knows how to restore using the LG restore tool. Lemme know in this thread how it goes.
Sources:
https://github.com/chevanlol360/Kernel_LGE_X5 (Thanks to chevanlol360 for fixing kernel source, if there is any problem with me using your source please let me know and ill figure something out. I just have no clue when it comes to kernel stuff, and your sources were an amazingly big help. Gonna try to base this off stock zv4 kernel in the future.)
The next sources were very heavily based off of Quarx's, Zaaap's, and Shinobisoft's work for similar devices on github. Find them somewhere and buy em a beer if you like what you see!
https://github.com/Quarx2k
https://github.com/Zaaap
https://github.com/shinobisoft
my sources:
https://github.com/touchpro?tab=repositories
And finally, the Philz Volt download here:
http://www.mediafire.com/download/2pbkhl06lj5rg58/philzvolt_bumped.img
Find something wrong? send me bug reports. Just post em up in this thread. Good ones are dmesg and adb logs.
And yes, I am working on getting CM11 compiling. Dont expect too much. I have a stupidly slow laptop and thats a lot more work than this was. If anyone wants to help, my sources are posted above, just throw down on it and make sure you post your updated device and vendor tree for the benefit of the whole community here.
Last edited:
