• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [Rom info] CyanogenMod 10 for Elf II, Aurora II, Crystal, Flame Fire, W22PRO (2012-12-20) by C troy.


Well-Known Member
Jun 28, 2012
whats CyanogenMod?
Below is the original post by christian troy below download/other links taken out by me the source below is where you'll find them
CyanogenMod 10 for Elf II, Aurora II, Crystal, Flame Fire, W22PRO (2012-12-20)


* UbiFS (like stock roms)
* Bluetooth USB dongle support
* USB GPS support (cp210x and pl2303)
* Xbox 360 gamepad support (xpad)
* PS3 USB gamepad support (hid-sony)
* Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
* OpenVPN support (tun)
* Veno congestion control algorithm


* Unrar the content of this (CWM v5.5.0.4 20121026) archive and put it in the root of a MicroSD.
* Put rom (cm10_elf2_$DATE.zip) and gapps (gapps-jb-$DATE-signed_ubifs.zip) files inside internal or external sdcard.
* Turn on the tablet keeping pressed VOL- and POWER untill you see the green droid.
* Select "Wipe data / factory reset" (you can use volume rocker to move up/down and power button to confirm).
* Flash rom (cm10_elf2_$DATE.zip), gapps (gapps-jb-$DATE-signed_ubifs.zip) and, the required compatibility zip.
* Now select "Reboot system now".
* Enjoy CyanogenMod 10!

- Changelog -


* Last CM10 build
* Fixed latest YouTube fc
* Fixed audio with some games
* Other minor stuff
* Updated upstream sources

Compatibility zip

* ELF-II v1.7
* Aurora-II v2.8 (if you have troubles you can always use v1.3.1 as fallback)
* Crystal v1.7 (like Aurora's users, if you have troubles use v1.0.3 as fallback)
* Crystal (new batch) v1.1
* Ramos W22 PRO v1.2
* Fire TM v1.6 - CWM v5.5.0.4
* Fire QM v1.7 - CWM v5.5.0.4

Compatibility zip (AdHoc support)
* Elf-II v1.7
* Aurora-II v2.8
* Fire TM v1.6
* Fire QM v1.7

Known bugs

* You tell me...


* If you're coming from a stock based rom, it's better if you use "stock" recovery to format "media" partition (the internal memory). And it'd be better if you don't use Google's backup/restore service to avoid breakages.
* Internal memory is mounted at /storage/sdcard0, external sdcard is mounted at /storage/sdcard1. If you wanna swap them (and make primary your real microsd) just flash this file after flashing rom's zip (you have to do it everytime you flash a new version of the rom)
* If you wanna increase the microphone capture volume open terminal emulator and after typing "su" type "alsa_amixer sset Capture 63"
* If you don't like Nexus 7 fingerprint and wanna use SGS-II instead flash this zip. Remember that changing fingerprint may screw Play Store, if it happens you'll have to perform a "wipe data / factory reset".

this Source:ciao:
"jellybean-aml" repos






---Old Changelogs----


* Other minor stuff
* Updated upstream sources


* Added reboot to recovery (you must have flashed CWM to the NAND or it will boot to stock recovery)
* Aurora-II / Elf-II: new compatibility zip (fixes stuck g sensor for people that had problems)
* Other minor stuff
* Updated upstream sources


* Fixed Netflix 2.x compatibility
* Potential fix for the few games that were still having a choppy/stuttering audio
* Aurora-II / Elf-II: fixed unresponsive WiFi when the screen was turned off
* Other minor stuff
* Updated upstream sources


* Updated compatibility zips for Elf, Aurora and Crystal
* Re-inserted missing file that broke wifi
* Increased amplayer buffer; flash videos using latest apk work decently and in hw mode. Sometimes you may not hear audio but toggling fullscreen mode will fix it.
* Other minor stuff
* Updated upstream sources


* Updated many compatibility zips, please check the section below
* Fixed HDMI (dual display and single panel) on Fire
* Updated elf/aurora DHD driver (and moved to NL80211 mode instead of WEXT)
* Cherry-picked "bionic: Add ARMv7 optimized string handling routines" commit
* Other minor stuff
* Updated upstream sources


* Fire / Flame: new compatibility zip
* Updated amlogic video playback library (now seek is working in apps like YouTube)
* Added "Expanded desktop" capabilities (enable it from Power Menu's settings to be able to hide status bar)
* Other minor stuff
* Updated upstream sources

2012-10-18 (repack)

* Now ELF-II requires a compatibility zip too. I've removed boot.img from the main rom because if someone with a Fire forgets the compatibility zip he can damage the touchscreen. So better safe than sorry, just add the compatibility zip in the pipe of the flashing files
* ELF-II: updated kernel (added BFQ I/O scheduler as default and enabled cgroup_autosched).
* Aurora-II: updated kernel (new compatibility zip includes a kernel very close to the ELF-II one)
* Crystal: moved to ELF-II kernel
* Ramos W22 PRO: updated compatibility zip, now both cameras should work
* Fire / Flame: initial support for both TM/QM screens
* Removed PPP Widget since it was causing troubles to Crystal's wlan
* Android detects both usbnet/eth ethernet (to use ethernet you have to type these commands from terminal emulator: "su; netcfg eth0/usbnet0 up; netcfg eth0/usbnet0 dhcp")
* Other minor stuff
* Updated upstream sources


* Bump Android version to 4.1.2
* Fixed (maybe) pops during sleep
* Crystal: added initial support
* Other minor stuff
* Updated upstream sources


* ELF-II: default to 1.5 GHz kernel (clocked at 1.32 GHz)
* Aurora-II: download new compatibility zip v1.3
* Added JB Power HAL (with pulseboost support). Don't install any app like SetCPU because it will be handled at a lower level. I've added a couple of goodies too, you can manage cpu min/max freq with display on/off editing the following values in /system/build.prop

As you can see if defaults to 408 MHz / 1320 MHz with display ON and 96 MHz / 1008 MHz with display off.
Don't change governor or the power HAL won't be used.
* Added support for amlogic ril. Supported modems will work out of the box, the other can be used with the included PPP Widget
* Updated upstream sources


* Fixed screen unresponsiveness with some games (Angry Birds after a pinch for example)
* Fixed camera detection, now Face Unlock will work.
* Updated upstream sources


* Updated camera HAL library with a jelly bean one (from zenithink c97 firmware). Now all video chat programs should work (it's been tested with Skype and GTalk).
* Updated libaml-ril.so (from c97 jelly bean)
* Replaced CM's Superuser (that right now has problems "remembering" permissions) with SuperSu
* Updated upstream sources


* Fixed choppy audio in game
* Reverted "older" libsurfaceflinger because it seems fixed upstream
* Changed something in the rild (again)
* Updated upstream sources


* Fixed video recording (again!)
* Fixed touch problem with some games
* Changed WiFi wake lock implementation
* Minor change to ril daemon
* Removed 20 pixels "frame" limit from touchscreen's driver
* Updated upstream sources


* Fixed 3-dot menu thing (if it still doesn't work be sure that under "Settings -> System -> Hardware buttons" "Menu button"'s entry is assigned to "open/close menu")
* Added an option under Display Settings to enable/disable Tablet UI (this feature replaces the build.prop entry)
* Added "u3gmonitor", an app included in AllWinner releases that should automatically launch usb_modeswitch on dongles that require it. Report any change because if it doesn't work I'll remove it. Note that if your dongle is recognized as a SD card you have to disable Mass-Storage mode (refer to Google because every dongle is different).
* Some minor changes
* Updated upstream sources


* Spoofed as Nexus 7 (if you have any trouble with Play Store clear both "Google services framework" and "Google play store" data)
* Fixed FC on license check of some games (specially gameloft one)
* Updated upstream sources


* Fixed video recording
* Bluetooth dongle now supports hotplug
* Different options under "Settings" if you're using tablet or phablet UI (for example to customize status bar toggles)
* Reverted default governor to "conservative", if you need more power you can set it from performance settings. Use "performance2" not "performance" or it will cap cpu to the higher frequency
* Experimental: older surfaceflinger library, let's see if it really improves performance with some games or it is only placebo
* Updated upstream sources


* Camera is working again
* Fixed volume rocker audio control
* Re-added move 2 internal SD feature
* Added a new menu entry in "Display settings" to toggle HDMI dual/single view
* Updated upstream sources


* Fixed USB storage in Tablet UI
* Fixed HDMI connection (if you wanna use the dualdisplay feature just remove the "#" character from "#ro.vout.dualdisplay2=true" entry in file /system/build.prop)
* Updated upstream sources


* Added NTFS and ExFat support
* Added usb_modeswitch
* Changed max frequency to 1320 MHz and default governor to performance2
* Fixed camera preview
* Fixed camera orientation on remote side
* Fixed audio capture
* Updated upstream sources


* First release, pretty much everything is working. If you wanna use the "phablet" (aka Nexus7) ui have a look at FAQs section, I've created a system property to manage it.



We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.