-
After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
Root [ROM] [R910] EXODUS 0.6 CWM or ADB script install
- Thread starter Silvist
- Start date
Clear my cache? I'm not sure how to do that. I did a factory wipe after installing the ROM. Is it possible that it's the launcher? I'm using LauncherPro rather than the stock launcher.
Hope this helps.
See the icon that says charged? I just have to make that a wee bit smaller thats whats causing the buttons to "squish" up.
Idk what happened but I installed 0.6 and when it rebooted my phone it kept FC at the lock screen so I turned it off and turned it back on to see if it would be any different but I got the same result. Tried it a third time and It didnt go pass the samsungmobile screen and continuted to vibrate repeatedly
That is sort of what it did and when I tried a factory reset that didn't fix it either, the only thing that worked for me was to do CWM restore of an either backup I made. You can try a factory reset, but that may not work. If that dont work you may have to use odin. I got lucky to have a backup up only a day old, and I lost the boot animation for my phone after the restore.
I did that and ran 0.6 again and couldnt go past the samsungmobile screen after the first try so i ran odin again and then ran 0.5 and that works just fine
I'm really not sure what you guys did, but again its normal for the screen to go black and for the system to force crash. I asked you guys before what did the script do. Did it hang? Did it finish, or what? If you guys stop it in the middle of doing it, yeah it'll mess up the phone, because while the rom is installing its removing and installing new things. If it doesn't finish it WILL BUG OUT.
This is typical, but make sure your in debugging mode, and your screen is unlocked. Then run the script, you'll see if force crash, but let it keep running. At the end it should restart the phone, and the phone may take longer than normal to turn on, but it will eventually (it only takes a while because it wipes cache, later it won't boot up that slow ever again). Afterwards it should work fine. Let me know if you guys still can't get it working. But be specific on what happens please.
Edit:
Also there isn't to much in a difference between 0.5 and 0.6 in script, except for the custom fonts. So if you got 0.5 to work, 0.6 should work exactly the same.
This is typical, but make sure your in debugging mode, and your screen is unlocked. Then run the script, you'll see if force crash, but let it keep running. At the end it should restart the phone, and the phone may take longer than normal to turn on, but it will eventually (it only takes a while because it wipes cache, later it won't boot up that slow ever again). Afterwards it should work fine. Let me know if you guys still can't get it working. But be specific on what happens please.
Edit:
Also there isn't to much in a difference between 0.5 and 0.6 in script, except for the custom fonts. So if you got 0.5 to work, 0.6 should work exactly the same.
Hmm, what launcher are you using? If your using different than stock, I would MAKE SURE THAT TOUCH WIZ IS SET AS DEFAULT LAUNCHER. Otherwise, yeah it'll bug out, because it won't find your custom launcher. That's why I used to recommended a full wipe prior to installing the rom. I still recommend that actually, just make sure you back up prior, esp since we have Clock work mod recovery now.
Shatterproof
Android Enthusiast
(Feedback) Im using 0.6 and I have a different launcher set as default and im not having an issue, actually I even moved TW to my SD card just to confirm that it (0.6) would still work after seeing this post and yes it does without any problems. But
eljefe0000
Android Enthusiast
0.6 exodus dont know if its just my phone but charging only goes up to 98% its been in all night.
I am not sure exactly what happened either but when I ran the script the first time, it went through and was pushing apps. The phone vibrated in the middle of the script and then it got to the framework portion of the script and the gave failed to install messages on everything from that point forward. The screen on the phone went black and would not come back, I had to pull the battery for the phone to even shut off. When I tried to boot back up it gave me the samsung logo and boot animation then went to the black screen and repeatedly vibrated once every second or so. After letting it go for about 5 minutes. I pulled the battery and this time did a factory reset/wipe. With the same results as before. Finally I used the restore option for CWM and then lost my boot animation. Once the phone came back up after the restore, I tried one more time and this time it was successful. Hope this information helps.
I just checked my phone this morning and I am at 100%, but i will say the battery life seems to drain faster with 0.6 but could be just because now I see a number instead of the green bar.
Silvist: Please don't take my posts as complaining because over all I am very happy with your rom I am just stating what I have noticed, or my personal experiences.
I've downloaded the file but i can't see the Indulge.bat anywhere. Do i need to disable the antivirus before uncompressing the file? I downloaded the file from the link that T3XAN posted.
2nd question: How do I install the CWM, do I need to install that first or is included on the installation of the Exodus Rom?
Sorry if the questions are kind of basic.
Thanks!!
You need to download the first file the second one is only supported if you have CWM installed this will allow you to use it to install instead of the batch file.
You can get the script from http://mosslakefun.com/files/Exodus0.6.zip
2. Follow the instructions in the CWM thread at this time CWM is not included in the Exodus Rom.
Hey we dont mind negative or positive feedback. Feedback helps us to make things better with each release. Its the lack of feedback and or thanks that gets people annoyed.
On the Battery mine has not gained from .6 but also has not lost anything the changes made ftom .5 to .6 have not had anything to do with the battery life. Just giving you a different icon to look at for battery status. That being said the number is actually a little easier to read and more accurate than a green bar so that may be what you are noticing.
Actually, what you guys need to do is re-calibrate the battery. If you got CWM you can do this by going under advanced options and hitting wipe battery data. I was having a similar problem before, and this seemed to fix it. Try that out and let me know if it helped at all.
fatjoejr2001
Newbie
Man what a great rom guys. Texan and Silvist you guys are awesome. Only problem I have encountered is MyBackUp Pro force closes every single time, but the free version works just fine. I was able to restore my backup apps through the free version, but as I said the paid one does not work no matter what I do. One thing I would change is instead of using the light blue (Teal?) for the theme you guys made use a sexier purplish dark blue (Just a suggestion that might be a bit more appealing). Also I was wondering if somebody can send me the apk or whatever I need to get back the metroapp store...I'd really appreciate it (If it's you that sends it Silvist thanks in advance...).
fatjoejr2001 (P.S. CWM is awesome on the Indulge).
fatjoejr2001 (P.S. CWM is awesome on the Indulge).
Thanks man Silvist really likes that color though so you would have to convince him
. If I had the metro app store I would send it to ya but thats one I didnt keep.
k0nane
Android Expert
Thanks man Silvist really likes that color though so you would have to convince him
Here.