• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Help So does EVO officially support 802.11n

Yesterday I picked up a new linksys e2000 wireless n router. My speed is 1Mbps... looks like I will be on the phone w/ linksys after lunch.


Keep us posted!

I am not sure if my router is capable of N speeds. How would I know?

54mbps is what I see on my phone.
 
Keep us posted!

I am not sure if my router is capable of N speeds. How would I know?

54mbps is what I see on my phone.

What router do you have?

If you are running a mixed (B/G/N) network, if a G device connects, then for most routers (single band) this will bring the network down to G speed. Some routers are dual band (2.4 and 5 ghz) and can run simultaneous devices at G and N, leaving the N devices at N speeds.

Finally, the whole G-N business is ONLY relevant if you're doing lots of data transfers on your LAN between computers. Most home internet connections are well below G (and even B) speeds so it will not affect your internet connection speed.

The advantage for EVO N support is that it means your network won't go to G speeds if all your other devices are N.
 
lets not get too technical. OP and others just wants to be able to verify that others can connect to N networks so lets keep the topic about that and not about throughput speeds mmk? :D

as far as "mix mode" i.e. running g and n devices on the 2.4ghz band, the linksys e3000 will not throttle down N devices to G speeds. both can live in the same bandwidth and have different "resolutions" or data rates. they wont all default to the lowest common denominator. these newer routers have like 6 or 7 antennas in them..

each persons network is going to be different however we CAN confirm that the evo will connect to N officially with an unrooted stock device. just make sure you are running 2.4ghz N or else you can only connect to G networks.
 
I can see it report N speeds, but every speed test (local ftp transfer, internet, etc) seems to be capped at around 15mbps. This is real world transfer not reported wireless link speed. I don't think the device can handle high thoroughput and having N on it is moot. Sprint isnt explicitly advertising this because its useless. It can't process transfers faster than a G link thus N doesn't matter.
 
guys, once again the question is CAN the evo connect to N. the answer is yes. it has been answered and verified several times. lets not get into specifics with data throughput as its beyond the scope of this post.

if others want to chime in with what routers they are using and have had success with then feel free. otherwise lets leave the data speed discussion out.
 
guys, once again the question is CAN the evo connect to N. the answer is yes. it has been answered and verified several times. lets not get into specifics with data throughput as its beyond the scope of this post.

if others want to chime in with what routers they are using and have had success with then feel free. otherwise lets leave the data speed discussion out.

I don't understand why you keep posting that the discussion is going off topic.

The OP asked what routers and what kind of success. If you don't talk about data speed how else do you plan on discussing success and how well N works? As far as I can tell, the whole thread is on topic.

Unless a discussion goes way off topic.. please don't "moderate" unnecessarily.
 
im on comcast: BLAST level.

motorola sb6120 modem -- DOCSIS 3.0 support. in the area i live in DOCSIS 3.0 is enabled and the speed is amazing!

linksys e3000 gigabit router.

those two are a good combination.

i just upgraded all my CAT5 to CAT5.e to take advantage of the increased gigabit speed on my intranet.

the E3000 router is dual band like many others out there, and i have been a fan of linksys equipment for decades. the EVO and the N 2.4ghz side of the router play very nice together...

once i get home the evo soft hands off to the network and also the voice side connects to the airave with no issues whatsoever...

I have the same hardware setup but Miami doesn't have docsis 3 yet. Looking forward to the bump in speed. It's pretty fast now as it is.
 
guys, once again the question is CAN the evo connect to N. the answer is yes. it has been answered and verified several times. lets not get into specifics with data throughput as its beyond the scope of this post.

if others want to chime in with what routers they are using and have had success with then feel free. otherwise lets leave the data speed discussion out.

With all due respect, how is a discussion of data throughput speeds "Off topic?" Are not data through speeds the criteria by which 802.11 A, B, G, and N are defined? This is a discussion about the capacity of the Evo to operate on 802.11 N. Any real or perceived improvements to through speeds would most certainly be relevant.
 
guys relax. what im warning against is not to get into a discussion about theoretical speeds. just post success with N use and what router. this is what the thread OP asked.

now lets please not continue this discussion on this thread. if someone wants to discuss with me, lets do so via PM.

apologies to others for the off topic...

as you were...
 
whats 13 feet away?

if you are speaking about the router then you must be certain its broadcasting N on 2.4 ghz band not 5 ghz or any other band.

verify any wifi passcodes you may need to log on to the network.

so which of these do i want? (i tried the one highlighted and its killed my network and took me nearly an hour to fix, it was like using dial up again)

56639148.png
 
>just post success with N use and what router.

Dont limit the conversation to arbitrary limitations because the next question will be "Why am I only able to download at G speeds on my N connected router?!?!"
 
Actually, Yes, I am pretty sure it does. I have read from several threads/posts here that it will support WiFi N. I believe that this was part of the first or second OTA update. I cannot confirm becuase I dont have an N router. But, if you look on here, there are several people that have reported they are using wireless N on their EVO.
 
From a previous post of mine, back in July:

Rooting isn't necessary for wireless N. With the last HTC update you can connect to wireless N as long as it's broadcast on 2.5Ghz. I have a variety of access points at work and have confirmed this with devices set up as wireless N only.

http://androidforums.com/1108823-post47.html


I don;t think so, it did not pick up my signal. in my house.
Make sure you're broadcasting the SSID, to pick it up automatically. Also, make sure you're using the 2.5Ghz frequency range. To the best of my knowledge other frequency ranges do not work.
 
Back
Top Bottom