Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Alright I have the APN setup and everything is working great and all. But why does it say home on the notification pull bar and lock screen? Is there a way to change this?
I have mine set up with the AT&T compatible sim. I have done this with my other Android phones. But I cannot send picture messages!!?!?!?
I have mine set up with the AT&T compatible sim. I have done this with my other Android phones. But I cannot send picture messages!!?!?!?
I will give that a shotSeriously? Have you tried, taking the sim out and then reinstalling it into the phone?
What are your APN settings?
I have it set up exactly as it is described on Straight Talk's site and the sim instructions.
I did leave out the proxy setting as another member suggested and it does seem to make the web faster. Maybe I will put it back in and try.
Not the mms proxy setting, the first proxy,
Ok, I dont care if I get flamed for this, clearly the single APN route doesnt work for everyone(myself included). So Im going to put my dual APN settings here so people can try them(since they work) and if they dont like it they can happily go back to one APN. These are my settings for Straight Talk on ATT SIM.
For those of you who want to try a dual APN setup and guarantee the MMS will work, try these:
First APN enter this:
Name - Straight Talk
APN - att.mvno
Port - 80
MMSC - http:mmsc.cingular.com (no spaces or //)
MMS Proxy - 66.209.11.33
MMS Port - 80
MCC - 310
MNC - 410
APN Type - default,supl (no spaces)
Second APN type this:
Name - MMS
APN -att.mvno
MMSC - http://mmsc.cingular.com
MMS Proxy - proxy.mvno.tracfone.com
MMS Port - 80
MCC - 310
MNC - 410
APN type - mms
Anything I didnt put down just leave blank. Activate the first APN and delete any other APN's in your system. Reboot your phone and give it about 30-60 minutes to configure. In the meantime, send yourself a picture. Start with something small (low res) and then move up to a bigger file.
Good luck and if you dont like this ignore my post. Its free to try and doesnt hurt anyone so dont be a hater for my post.(I know who you are) And if this works for you, dont hesitate to thank me. Cheers!
So which one of the two needs to be check marked by the dot???
Only the first one can be selected.
Sorry for all the questions but how long have you been using ST with the dual pan setting?
I've tried all the APNs that people have suggested and they are just not working. I'm able to receive pictures but when i send them it just won't send. I guess its my service area that's the problem.
Did you try sending yourself a picture? Sometimes you need to do that in order to reset the system.
Nope that didn't work. I don't know what else to try.
)?Nope that didn't work. I don't know what else to try.
If you tried my settings above, you have to give it a few hours to settle in. This is true especially if you have tried different APNs in a short period. Put mine in then turn off device, not reboot, then power back up after about 30 seconds. Then like I said previously, give it a couple hours on the system. After that time, try sending yourself a small low res picture. Don't freak out if it doesn't come through right away, could take up to 15 minutes or so. After that comes through try a larger file and see if that works.
If this still fails, last resort is to call straight talk support and see how it's configured on their end and/or have them reset it.
Nope that didn't work either. I've tried sending a pic to my wife and friends and it just stays there trying to send it.