Help Superpad 2 Flytouch 3 firmware update-Official Releases

[erkoloko]

These are my system information:
Model Number;
Disco
Android version
Android2.2-20110302
Baseband Version:
Unknown
Kernel Version
2.6.32.9zhjun@zhjun-desktop #2
Build number
FRF85B

bruno I have the same system information,
Have you found the firmware??

 

[kashmiri]

@dart16, would you be able to re-upload GPS test, now that multiupload has closed?
thanks!
k.

 

[dart16]

No problem..I can't remember which one I used

GPS Test V2.3

or

GPS Test

 

[rebel25]

Hi Guys,

I flashed firmware to my SuperPad III model DK1032. It started to vibrate and I turned it off as instructed in the instructions. When I turn it on it just keeps on virbrating and sits on the android screen. I left it for 10 to 20 minutes with no change. Any ideas?

Superpad III
Model : DK1032
Android : 2.3.3
Kernel : 2.6.35.7-infoTM

 

[mcangel000]

I boght this tablette
10.2" Flytouch 3 4GB Android 2.2 PC Tablet eReader WiFi GPS HDMI 1.3MP Camera
Product Identifiers
Brand Flytouch
Model III
MPN eBay_FLTIIINA4SLVBLKUK
Carrier Unlocked

Key Features
Type Tablet PC
Display Size 10in (25.4 cm)
Hard Drive Capacity 4 GB
Operating System Android 2.2

When power is turned on only a white screen appears ...
and i am unable to reset the tablette either....
Please help me !!! I pay 150$ with this and no work ...

 

[maverickfm]

Hey i bought this tablet (Superpad i7 Flytouch ARM11 super slim 1.0GHz CPU Fastest engine Tablet PC) but from amazon.com and im having problems with the firmware .its specifications are
First the booting is too long sometimes it won't boot at all so I have to reset ,second every time it turns off it resets by it self and cant conecet wifi give me a frimware for this model or the recovery image so I can fix it..thanks

Model Number752
Android version:2.3.3
Kernel Version:2.6.35.7-InfoTM
android@androidbuilder #9
Build Number:
MZ-Android:Build Number= GRI40,Version=V1.7_U709_1.0_8188,Date=2011-10-28/13:31:22

I don't know much about android so I wrote you everything I got about the device I need a compatible firmware which can make this tablet work good,here are the product details:
Operating System:Google android 2.2 Keyboard: Touch Screen Display Technology:Resistive touch screen Screen Size: 7 inch,480*800 CPU Type: A8 cortex CPU Manufacturer: Infotmic CPU Model: IMAPX200 CPU Speed :1GHz RAM /Cache:128KB RAM : 512MB Hard Drive Type:NAND FAST FLASH Hard Drive: 4GB PCMCIA Expansion T-FLASH(Support 16G MAX) Camera: 1.3MP HDMI:1080P 3G modem:3G modems required G-Sensor: Four way Audio:Built in stereo speakers/Built in Microphone Software: Youtube/Facebook/Twitter/MSN/Android market/Skype/Calculator/Google Mail/Google maps/iReader/Quick Office Language: Multi-language support Battery Type: Li-on battery , 3400 mHA Battery / Run Time: About 2H Power Device Type:AC Adapter Voltage required:100/240V Color: Silver Item Dimensions/ W*D*H 12.5*20*0.9CM Shipping Dimensions/ W*D*H: 26.5*6*16CM Net Weight: 350G Ports: 2 x Mini USB 1 x HDMI port 1 x Micro Sd Card slot 1 x DC jack 1 x Earphone jack Wireless WIFI Wireless Protocol 802.11 b/g Video AVI/RM/RMVB/MKV/WMV/MOV/MP4/DAT(VCD format)/VOB(DVD format)/PMP/MPEG/MPG/FLV/ASF/TS/TP/3GP/MPG Audio FLAC/APE/WAV Picture JPG/BMP/PNG/GIF Ebook WORD/EXCEL/PPT/PDF/TXT/CHM/HTML Accessories 1 x charger 1 x usb cable 1 x i7 tablet pc 1 x User manual

 

[kimmyh51]

I have tried to install this and other firmware on my flytouch III tablet, copied the files to the root dir of the TF card, inserted card, restarted.... it just boots normally into the existing (bug filled crashy) OS install. It is currently on 2.2 I have also tried restarting and holding down the on button + minus, and various other combinations suggested on various forums and by the supplier of the tablet, - and no matter what I do, I get the same result (or lack thereof)

at this stage even bricking the thing would at least be some progress!

does anyone have any suggestions to help me force the thing to run the firmware update or diagnose why it isnt? when its booted into its currently installed firmware, I can browse the tf card and see the files on it in the root dir. I tried to double click on them but got an unknown file error (assume that it has to boot from them to work).
I have tried more than one tf card, i have formatted the cards first, and nothing has helped.

 

[kimmyh51]

i have noticed other people talking about lancher apps - do i need something or is there soemthing I can get (not off the market) that i can install to try and make the thing run the firmware?

 

[dart16]

@rebel25... the most likely reason is you have flashed the wrong firmware for your model tablet. You should be looking for firmware specifically for the DK1032. Other firmware *may* work, but DO NOT flash any file with 'boot' or 'bootloader' in the title unless it is specifically for your model.
Try this thread model number: DK1031 - SlateDroid.com

@mcangel000 As you don't know the model number of your tablet (model III is not correct, it is a flytouch III but your model number is not quoted) you should contact the seller and ask for an RMA number so you can send it back as faulty. Doing anything else will invalidate the warranty and you will probably end up with a non-functioning brick and no chance of a refund.

@kimmyh51 what is the model number of your tablet?. (menu/settings/about device/model number) Only Disco or Disco10 models can be updated this way.

 

[automechcanic]

I have boot looped my sp3(thats what I thik I have).Most everything I have tried works like the rest of these.Also have same problems as others.I believe this came after P041 model,have compared to some from other forums and that is there opinion also.Bought 2,other still untouched.And have run across 2 others with this same device in other forums.Nothing available for this device yet is what am told.I was unable to root with z4root,had to use gingerbreak.Have iuw burner,made male to male usb and can establish com with laptop when holding menu an power button combo,pc recognises tab,tab says comuncating with pc and iuw green.
About device reports ht001 but everything else says m799ca(build prop file) and this model discontinued is notated!10" with 1 tf slot instead of 2,all other slots/ports similar to these tabs.1024x600 display multitouch support but single touch only.No firmware #'s in corner of screen like others,red light when charging and green light when on.9 volt charger.
Infotmic Imapx 210
Motherboard WWE10-6-2-V2.0
DK1031L-2011.11.02
Fingerprint:infotmic/m799ca/m799ca:2.3.3/gri40
Have had apart has 8gb card inside an upgradeable to 16gb,512 mb ram.
I am trying to fix boot loop issue.If I have no other option but to reflash will something available in this forum help?Will have apart again this weekend,member from another forum wants a copy of contents of internal card,has issue with his but not sure why he wants this?.If anything of use can copy and upload.
Please feel free to offer any help or suggestions,lol
My apologies if I have posted in wrong thread.
Thanks for any help

 

[sopepe]

I'm new to this forum. As @kimmyh51 described it, when I tried to upload Tim's new firmware following rigurosely step by step the instructions, nothing would happen. In my case, despite the fact that I can browse the microSD card, I'm unable to move to the SD card any newly installed programs
Model Number: Android Tab 10
Android version: V2.3 2011-11-21 (01112)
Kernel version: 2.6.32.9
Buid number: FRF85B

 

[sopepe]

Hi everybody. Since only the model Disco 10 can be flashed with Tim6 using a microSD memory card, can anyone tell me (teach me) how to flash my pad?????
Model Number: Android Tab 10
Android version: V2.3 2011-11-21 (01112)
Kernel version: 2.6.32.9
Buid number: FRF85B
Thanks

 

[dart16]

Hi everybody. Since only the model Disco 10 can be flashed with Tim6 using a microSD memory card, can anyone tell me (teach me) how to flash my pad?????
Model Number: Android Tab 10
Android version: V2.3 2011-11-21 (01112)
Kernel version: 2.6.32.9
Buid number: FRF85B
Thanks

I suggest you start reading HERE

 

[sallyanne]

Hi,
Thanks for the amazing support,
Please help to reinstall (change) the internal FT(presently it is 4GB) ie i have 8GB micro SD card, please let me know once i replace it with my new 8GB how to reinstall android again.

SallyAnne Hi,
My Flytouch would not save anything. A friend of mine replaced the internal SD card and it is now fine. Note the SD card was underneath the Motherboard, so that had to be removed as well. My main grudge is that the Tablet is not recognised by Google, which I think is really bad, as it is actually run by Google, but is not listed as accessible. I want to use "Draw Something", but it is not listed in my Apps, so I cannot get it. Poor show, I think.

 

[Jurdz]

the problem in my device is when i install something OR uninstall something, when i restart my device all the things i installed are NOT THERE. and things i uninstalled are still there ready to work. its like my device was deep freezed! whenever i save things on it, after a restart, all the things i saved, installed, uninstalled and even my game stats are not save.. so i need to redo it again..

i already tried to factory reset it by pressing the power button plus menu button, but its just doing a recovery process, which still doesn't help. before i used those buttons to factory reset my device. now its not functioning.

another thing i did to try to fix it, i tried to upgrade its firmware to 20110712_Tim5a, but after a successful upgrade.. when i removed the microSD card and turn-on the device. holy F*ck my device is still back to its freaking state like NOTHING HAPPEN..


PLEASE HELP GUYS..

I bought a FT3 from the carboot for 25 quid. I had EXACTLY this problem. I read somewhere that the FT3 has an internal micro sd card as ints memory so I took it apart and replaced the 16gb memory card. Works perfectly now!!!!
I analysed the sd card with a partition manager and there are SEVEN partitions on the card!!!!! and none of them can be deleted or contents hanged in any way.

I also have another problem in that the touchscreen works but is VERY unresponsive to my fingers. It works a lot better with the stylus but even then the responsiveness is not as good as Id expect a tablet should be.

Anyon got any ideas on this touchscreen issue?

 

[vlad kondratiev]

SallyAnne Hi,
My Flytouch would not save anything. A friend of mine replaced the internal SD card and it is now fine. Note the SD card was underneath the Motherboard, so that had to be removed as well. My main grudge is that the Tablet is not recognised by Google, which I think is really bad, as it is actually run by Google, but is not listed as accessible. I want to use "Draw Something", but it is not listed in my Apps, so I cannot get it. Poor show, I think.

aliexpress has replacement touch screens
https://www.aliexpress.com/item/Rep...a08s-5-6-7-8-9-Flytouch-V-VI/32832773739.html