when i turn my phone it's stock on Samsung logo and wont go nowhere, so i just got a JIG from ebay, and like to try to reload the stock firmware using download mode, the phone is reading the JIG ok, but when i connect the USB cable, the computer wont recognize the phone, i'm limited of options here, "HOME" button is not working also, so any idea in how to make work ??
-
After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
Root [T-Mobile] Computer won't recognize phone [DOWNLOAD MODE] using JIG
- Thread starter jeffofgod
- Start date
BRAINZ2013
Extreme Android User
You may have to ask the jig how to can I ask do u have all the phone drivers on the pc
BRAINZ2013
Extreme Android User
What happens when you turn on the device and what happen for you to get jig
Next time try chains or
http://www.xda-developers.com/android/need-a-samsung-usb-jig-build-your-own/
Next time try chains or
http://www.xda-developers.com/android/need-a-samsung-usb-jig-build-your-own/
BRAINZ2013
Extreme Android User
i got it from ebay, works but the computer cant read my phone, tried different computer also
BRAINZ2013
Extreme Android User
The plug would need drivers or the drivers would be on the computer
already installed, it's charges the phone, also accept another phone, just not this one.
BRAINZ2013
Extreme Android User
When u turn on the phone what does it say on the screen that has the jig plugged in
go stray to download mode
look at this example
http://galaxynote2root.com/wp-content/uploads/2012/10/howto-unroot-unbrick-galaxynote2-2-690x350.jpg
BRAINZ2013
Extreme Android User
Now what did it do before that made u buy the jig .
If in download mode unplugging the jig and plugging the USB with Odin waiting would be one way
If in download mode unplugging the jig and plugging the USB with Odin waiting would be one way
BRAINZ2013
Extreme Android User
I Dont see how a device not plugged in to the USB will show up on the computer if the jig is only a adapter you need something for it to read on it not on air . so unplugging the jig while its still on download mode and plugging USB will cause the device to show up if u have the drivers
this is what i do ... unplug jig and plug usb cable
BRAINZ2013
Extreme Android User
Yes . didn't you read that the jig Dont always work
yes i did, but seen to be working, at least i can get to download mode, now just need to be recognize by the computer lol
BRAINZ2013
Extreme Android User
Well that say u Dont have the adb USB drivers can u get into Odin for it to recognize it
BRAINZ2013
Extreme Android User
Do you have Odin and do you have all the drivers for your device .
no.
no odin, no computer, tried different computer also, tried to uninstall the driver and re-install again, still nothing.
BRAINZ2013
Extreme Android User
Can you take a photo of the top of the adapter u brought yes the jig adapter
when i connect the usb will charge the phone
here the link
Unbrick at T SGH I747 USB Jig Dongle Download Mode for Samsung Galaxy S3 Android | eBay
BRAINZ2013
Extreme Android User
Pull the battery and upload all the drivers to the computer and or laptop get the correct USB cable maybe the cable is gone maybe change USB ports once done try the jig to get into download mode .
still nothing, tried to connect another phone and the computer recognize perfectly.