Root Teamwin screen

[alski]

Upon starting my cell, the only thing it does is flash "TEAMWIN" over and over, nothing else, what the hell happened?
Please Help

 

[BRAINZ2013]

Hello and welcome to the forums. You are in a bootloop. You may need to do a unbrick . to ensure this doesn't happen again update the recovery before attempts to use it .

 

[alski]

So how do i unbrick? Even if i pull the battery out and replace it, the phone starts up and wants to enter recovery and when if it's off and connect it to my computer it again, :hmmmm2:starts and tries to enter into recovery.... WILD
Any help is greatly appreciated :hmmmm2:

 

[BRAINZ2013]

You could try to do the key combo to help it out if not following these instruction on this I posted would help I hope u have a SD card for the device

Here it is try this to restore your lg esteem .
1. Download and extract the doc file it has the lgpnst and the DLL following the directions will put you back in working order the file download is
https://m.app.box.com/view_shared/42670c11cc31d546a6f6

2.Get the driver for the phone and install it http://www.lg.com/us/support/mc-supp...er_1.0_All.exe

Remove your battery and connect your phone via usb (the hard buttons on the bottom of the phone should blink slowly). **Make sure battery is at least 25% charged
Hold down power + vol up.
Phone will come on and read "downloading do not remove cord"or something to that nature. Put battery back in.
If you followed step 2 correctly, LGNPST will now show an unknown device and will be in emergency phone bookmode.
Under the emergency tab it will ask you for 1) a .dll file and 2) a phone book. Click on the folder icon next to .dll file and load the VS910.dll from wherever you have it saved. Click on the folder icon next to phone book. Navigate to the folder where you have saved the correct .tot file. in the "file name"box type *.* and hit enter. If you are in the correct folderyou shouldnowsee the .tot file, click on it then click "save".
Back on the LGNPST screen click on start. It should now say MASTERBIN and a percentage ticking up (if not you have done something wrong).

 

[alski]

When i type in the file name for the .tot, it tells me wrong file type?

 

[BRAINZ2013]

You didn't read the post its a key that say *.* inside the box

 

[alski]

Got it working again guys, thanks for all your help guys:beer::thumbup::adore:

 

[alski]

Now it says "You can not switch usb mode with factory cable"? What's up with that, i can't transfer data charge it via my PC or enter internet connection.

Here we go again.

 

[BRAINZ2013]

Did you do a factory data reset after you got it working again . do the reset and make sure its updated with zve

 

[alski]

Yes i did a factory reset and still nothing, the time is wrong and still can not use USB for charging, mass storage or internet connection. I had to do a search for ZVE .tot file just to get it to this point.

 

[BRAINZ2013]

Nahh you could use that one but I can make life little easier I let you update from the lg website I post it all u have to do is update the software or u can use the zve tot it was made sometime ago but it will do the trick

 

[alski]

Got the USB part of the problem fixed, all i need to fix the time, right date but it's 4:03pm here and it says 11:04pm, that's a 7 hour difference. not sure how to pass on the fix for the USB, but it's a small file.

 

[alski]

I don't know if this helps, but this is the file i found here, on this forum, Thanks to Fuzzy13
Dev-Host - LGRepairTESTMODE.rar - The Ultimate Free File Hosting / File Sharing Service

 

[BRAINZ2013]

Are u on zve

 

[alski]

I'm done, it's fixed. USB, service connection. Thanks everyone for your help, and most of all A BIG THANKS TO FUZZY13.

 

[gbiggie]

To the root side