Root Whats the deal?

[SinfulDragon]

Running BBv1
Installed 1GHz BEKIT7
newest SETCPU

When I restart my phone the widget shows the max at 1GHz but if I go into set CPU the slider stops at 600MHz. If I try to move it then it drops the MAX from 1GHz down to 600MHz

what am I missing?

 

[SinfulDragon]

Oh and the only profile that is set is a failsafe and no, it hasn't reached those temps.

 

[jackburnt]

Sorry, had to.

 

[sing1gnis]

Do you have auto-refresh checked?

 

[SinfulDragon]

Auto Refresh checked, Auto Detect speed selected after installing the kernel

 

[sing1gnis]

Auto Refresh checked

I think that could be the problem. If you touch profiles or system info, you should see it jump up to 1GHz.

Also, you may have to try moving the slider back and forth until it gets to 1GHz.

 

[SinfulDragon]

Hey alright, messing with that auto refresh then sliding the bar back and forth (though I'll admit the entire time I was thinking 'this is stupid') actually worked. I don't have a good reason for why but thanks!!

 

[csoga]

I'm using a 1 ghz kernel and had the same problem... mine is the P3designs kernel, but this "fixed" it for me, maybe it'll work on the bekit too.

At first I used Autodetect and my numbers were the same as you describe. Under Device Detection, I changed to Droid and the slider went to 600 max... then, just playing with it, went back to Autodetect and the slider now reads 1000 max. I don't use any profiles yet, and just keep the CPU Governor on 'performance' when plugged into USB on laptop, and 'ondemand' when unplugged. Good Luck

eta: Oh, and I checkmarked Set on Boot and re-booted... really don't know which one did it, but it's worth a try?

 

[sing1gnis]

Hey alright, messing with that auto refresh then sliding the bar back and forth (though I'll admit the entire time I was thinking 'this is stupid') actually worked. I don't have a good reason for why but thanks!!

It does seem silly. I've learned to just leave auto-refresh off and be done with it.