• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root ZTE U960 ROM Discussion

Hi there from Romania,
I'm using one ZTE U960 in my country with SIM1-Vodafone & SIM2-Orange.
My device was ordered rooted and unlocked from EtoTalk.
Checking Settings/About Phone I found that my model number is: EtoTalk.Com U960 2B03 V1.5d, Android version 2.3.5, SIM1 baseband version: U960V1.0.2B03T & SIM2 baseband version: U960V1.0.2B03W, hardware number: ts6c?!, kernel version 2.6.35.7-perf+. Processor ARMv7 rev1, BogoMIPS 681.57-Hardware:MSM7X30 ZTE U960, Frequency Range:122.88->1024.0MHz, Current Frequency: 1024.0MHz.
Adobe Flash Player ver.11.0.1.153-size 64KB, resolution: 480x800, refresh rate: 56.0, X factor for DIP:1.5?!, density: 240dpi.
Product: msm7630_zteu960. Some of the informations are obtained using Android System Info (@catty62-what application have you used for screenshot?-ShootMe doesn't work on my ZTE)
Flash Player isn't working, Android Market successfully transform to Google Play, SMS contact name isn't appear with default messaging application or Handcent-I use ICS Messaging but - ATTENTION!- it seems that the old application doesn't work anymore and when I send SMS with ICS Messaging it use only SIM1 and I can't select SIM2.
Regarding USSD codes for SIM1-Vodafone ROmania- it works, also for SIM2-Orange ROmania- but I haven't tested all the codes.
And now, the questions:
1. What is the latest custom ROM made by Catty, I have found too many links?ZTE_U960_MOD_Catty_v1.5.1_wipe &
ZTE_U960_MOD_Catty_v1.5.1_nowipe
2. Do you have EtoTalk Tools for Android 2011.08.23v1.3? I have this application and ... I have no idea what to do with it.
3. I also have one application - Software update - I assume that it connect to EtoTalk.com and download updates but ...
 
Regarding USSD codes for SIM1-Vodafone ROmania- it works, also for SIM2-Orange ROmania- but I haven't tested all the codes.
Click to expand...

Interesting, can you tell if USSD on SIM1 are still working with the Catty's rom ? (do a backup of your rom first, both with titanium backup and from the recovery menu)

1. What is the latest custom ROM made by Catty, I have found too many links?ZTE_U960_MOD_Catty_v1.5.1_wipe &
ZTE_U960_MOD_Catty_v1.5.1_nowipe
Click to expand...

It's the same rom,, one of the two wipes the phone, the other one can be used to upgrade an older rom `w/o deleting your installed apps and your configurations (usually it works flawlwssly if the old and new roms are close enough)

2. Do you have EtoTalk Tools for Android 2011.08.23v1.3? I have this application and ... I have no idea what to do with it.
Click to expand...

It's more or less useless, maybe it works better on phones based on Mediatec CPUs.

what application have you used for screenshot?
Click to expand...

I'm using this one

https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5nZWVrc29mdC5zY3JlZW5zaG90Il0.
 
Hallo Forum i com from germany and i need help please,
I will flash my new phone with catty-rom
My phone have: baseband U960V1.0.2B03T--Kernel-Version: 2.6.35.7-perf+
Also i put cattyrom 1.5.1 on my sd-card
Go in recovery-modus
Install zip from sd-card catty-rom
Choosr zip from sdcard
Ilook for catty-rom
yes install catty-rom
Then i can reed finding update-opening update-install update-zie u960 2B03 MOD Catty V1.5.1-start copy system files-updating img files to patitions-installing system-installing from sdcard complete
Them i go back of rebbot system now
But i have no this new rom on my phone
Only i see a white picture
What must i do that i have the catty-rom on my zte u960???
Sorry for my englisch i hope you can understand me.
 
scooterfips said:
Hallo Forum i com from germany and i need help please,
I will flash my new phone with catty-rom
My phone have: baseband U960V1.0.2B03T--Kernel-Version: 2.6.35.7-perf+
Also i put cattyrom 1.5.1 on my sd-card
Go in recovery-modus
Install zip from sd-card catty-rom
Choosr zip from sdcard
Ilook for catty-rom
yes install catty-rom
Then i can reed finding update-opening update-install update-zie u960 2B03 MOD Catty V1.5.1-start copy system files-updating img files to patitions-installing system-installing from sdcard complete
Them i go back of rebbot system now
But i have no this new rom on my phone
Only i see a white picture
What must i do that i have the catty-rom on my zte u960???
Sorry for my englisch i hope you can understand me.
Click to expand...
If the process of flashing rom is ended without error, try to wipe the cache and the dalvik from the recovery ...
If not solve the problem try to rewipe the cache and the dalvik and try to reflash the rom ...
(the dalvik wipe is found in the advanced menu of the recovery)
 
Hallo catty,
Thanks for your answerd
But i have the same problem, i can not flash your rom.
That is what i do:
First i go in recover modus
Next i go to advanced
Then of wipe dalvik cache
Yes- wipe dalvik cache
Reboot
Them install zip from sdcard
Choose from sdcard
I look for our rom
Yes-install zie u960 mod catty..151wipe
After ca. One minute i see start copy system files and so on
I go back to reboott system now
But after them i see only a with picture.

What must i do? I dont no.
Can you wright me . For . What i must do?
 
Try to flash a different ROM firstly to see what happen.

You can find mine on post #8, if it works, try to flash catty's one as a second step
 
Hallo,
Yesterday i flash catty-rom 1.5.0 and ist ok. I can flashen.
after them i will flash version 1.5.1 but it not going.
Same i write in my first theme. I see only a white picture.
Solutor i can not download in your post #8 nr.1and 2
Thanks for help
 
scooterfips said:
Hallo,
Yesterday i flash catty-rom 1.5.0 and ist ok. I can flashen.
after them i will flash version 1.5.1 but it not going.
Same i write in my first theme. I see only a white picture.
Solutor i can not download in your post #8 nr.1and 2
Thanks for help
Click to expand...
on the v1.5.0 try to install the last update that you can find here and see if it's working...
(with the update you have all the init.d support, the 379Mb of ram and the overclock to 1.4Ghz)
 
I installed Catty ROM 1.5.1 today (from #149), then installed the OC Kernel (From #187).

Works very well so far, very very fast! Much faster than the old original Etotalk ROM I had.

I did have a freeze as I was trying to enter google login info on 1st boot. Rebooted, entered info and all now runs well.

Flashplayer looks like it is working! This did not work on old ROM so thanks for that.

A question, is V6SuperCharger working by default in this ROM?

I have not flashed the new radios yet, but not really had many problems with SIM2, SIM1 is a little flakey for data, so will update radio soon.

I hope to try it with my in car bluetooth mono FM transmitter later, see if that now works....

Thanks very much for your work! (I clicked thanks in #149)
 
Hallo catty,
I can flash 1.5.0 BUT NOT 1.5.1 Rom
First i flash 1.5.0 --that is ok
After i will flash 1.5.1-BUT I CAN NOT FLASH this rom after 1.5.0
So i can not flash the new Kernel.
I dont now what i must do.
I think is better when i wait of ics 4.0
Thank you
 
I am seriously contemplating buying this phone. The active support from both Solutor and catty62 means a lot.

However, my current dual sim is by Gigabyte. The battery-life is not very good, indeed so bad that I turned syncing off. It also has glitches. Switching between sim 1 to sim 2 takes forever.

That is the main reason for wanting this dual active phone.

Then my question: how is call quality on those sims, switching etc? Can the proud owners please comment.

299 from fastcardtech including shipping seems a good deal (even with a fake 4.0). Any other suggestions?

Oh, the other phone I am looking at is the Lenovo A750 or the ZP100. Seem very fast.
 
chipist said:
A question, is V6SuperCharger working by default in this ROM?
Click to expand...

V6SuperCharger is not working by it self you must install it that is locate in /system/xbin/v6sc.sh
to install V6SuperCharger run it as "SU" and you must use this options:
Scrolling speed Option: Choose 1 fast
Integration build.prop: choose option B integrates with build.prop
Init.rc Integration: Integrates with init.rc choose option Y
Disable Animation AWESOME V6?: Select Y to disable
Select menu item 10 to perform automatic configuration
SuperMinFree Calculator Apply Settings? Choose Y to enforce
At the end choose option 30 to exit and restart the terminal to complete the configuration.
After the restart, wait 180 seconds and run /system/xbin/v6sc.sh to verify if the configuration properly gives "100% Supercharger"
chipist said:
Thanks very much for your work! (I clicked thanks in #149)
Click to expand...
Thank ...
 
lli said:
I am seriously contemplating buying this phone. The active support from both Solutor and catty62 means a lot.

However, my current dual sim is by Gigabyte. The battery-life is not very good, indeed so bad that I turned syncing off. It also has glitches. Switching between sim 1 to sim 2 takes forever.

That is the main reason for wanting this dual active phone.

Then my question: how is call quality on those sims, switching etc? Can the proud owners please comment.
Click to expand...

We have already replied many times to this kind of questions (here and in the generic dual sim thread).

Battery life is good, sensitivity very good, and audio quality is way better than other well known monosim [smart]phones.

Being a dual radio there isn't any lag on call switching between sim 1 and 2



299 from fastcardtech including shipping seems a good deal (even with a fake 4.0). Any other suggestions?
Click to expand...


Haven't looked for prices lately, surely this looks like a good price, the very first users payed for it almost 500$ (and are still happy)


Oh, the other phone I am looking at is the Lenovo A750 or the ZP100. Seem very fast.
Click to expand...

Yes, i suggested those models as cheaper but (likely) worth alternatives when they aren't still released.

The main concern is the battery life, not the CPU power that looks on par, if not better, than the cpu used on the ZTE phone, surely is waaaay better than the elder MTK CPU (quadrant results are around 2200 for MT6575 v.s 600 for MT6573).

The battery life is surely not on par with the zte one, but the question is still open.

We have to wait for real users experiences.
 
  • Like
Reactions: lli
wonders123 said:
i also wanna to buy theZTE u960 from taobao ,but i don't know whether it can be used in Spain,who can help to answer my quesion ?
Click to expand...


You can use this phone, more or less all over the world, with few exceptions

AFAIK Spain's networks are standard GSM/WCDMA networks w/o any strange frequency or protocol oddities
 
The Solutor said:
have you tried both wipe and nowipe versions ?

Yes i have--but is not going.:mad:
After flash i see a white picture.


I can't see any problem using the OC kernel on the older rom, BTW is better to understand why the v1.5.1 isn't working for you.
Click to expand...
When i am not flash 1.5.1 -so i can not install a new kernel :mad:

Only i can flash the version 1.5.0 from catty
I dont now wy it is so.
 
Is there anyone that couldt give a helping hand rasing the volume level on my bluetooth headset, as it is really low compared to my old phone.
(same headset different phone)

I looked at the code sheet attached in this tread but i seem to fail at getting it to work, or what codes to use.

Regards
Domin6
 
The Solutor said:
I dont have problems wit BT (I usa a BT car stero, not an headphone)

You can try this (or similar apps)

https://play.google.com/store/apps/details?id=com.FREE.android.lvh

To see if it helps.
Click to expand...
Thanks i will test this over the next few days, loud volume on headset is a must for me as i work in a loud enviroment from time to time, and the headset volume on the ZTE is really low compared to when i use the same headset with the old phone.

Headset is a Jabra headset, if that matters.
 
You must log in or register to reply here.
Back
Top Bottom