• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Help Awake time / up time the same after updating to Fresh 3.5

1) Did you try rebooting? Does it do this all the time?
2) If you haven't rebooted yet, wait on that. Install Spare Parts, plug your phone in for a minute, leave it alone for about an hour, then open Spare Parts and check partial wake usage since last unplugged. What do you see at the top of the list, and how long has it been running?
 
HTCeasar said:
Says 3 min. 45 sec.
Click to expand...

That's not bad. If you go to battery statistics, then tap on cell standby, do you have a high time without signal?

And yes, you can flash that kernel if you want. It might help. Thing is - it could be some other issue, and flashing that kernel might make it look like it fixed it, when it was something else.
 
akazabam said:
That's not bad. If you go to battery statistics, then tap on cell standby, do you have a high time without signal?


And yes, you can flash that kernel if you want. It might help. Thing is - it could be some other issue, and flashing that kernel might make it look like it fixed it, when it was something else.
Click to expand...

Time without a signal says 0% ....
 
I flashed netarchy 419 kernel back on and it didn't help still 100% awake. Here are my settings.

snap20110102_121419.png


snap20110102_121435.png
 
Maybe it's related, maybe it's not, but I see you haven't updated your radios in quite a while. You're on a 3.70 base ROM, so you should be using baseband 2.15.00.11.19.
 
Can anyone give me a quick run down on how to flash the new radio. I booted into recovery and choose install from .zip and it returned back to the reboot screen after like 3 seconds. I got no confirmation it was updated. I rebooted but it was not updated. I did download the update off my phone and placed it on the root of my sd card. Could that be the issue?
 
Don't know why but after the third reboot from a failed radio update it started sleeping. Which is good but now I kinda want my radio updated if its necessary and it won't update. Just starts to install then stops after about 2 seconds. No update confirm .... ??? I'm using clockwork and put it on root of sd card from my pc this time and still nothing.
 
Thanks for all the help fellas. I updated with the radio link from Akazabam and my phone is running alot smoother faster and sleeping properly again. It actually started not sleeping again before the update worked but everything good now. What exactly does the radio do?

Here's my updated radio.

snap20110103_142927.png
 
I had the same issue with my phone staying awake 100% of the time and I fixed it by flashing back to PRI 1.77 from 1.90. I used to get about 5 hours of normal use out of my EVO and now I get 24+ hours.
 
I noticed I had the same issue today after upgrading my Fresh.

The radios/PRI update has fixed this for me as well.

(on a side note: you can go from Fresh 3.1.0.2 to 3.5.0.1 with no data wipe and everything still works perfectly, heh.)
 
You must log in or register to reply here.
Back
Top Bottom