every time im getting using the update 8 version
Current minfrees = 6,8,16,20,24,35 mb
prior v6 = 6,8,26,28,30,32 mb
probably because you not setting the /data/99SuperCharger.sh
to run at boot and run as root
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
every time im getting using the update 8 version
Current minfrees = 6,8,16,20,24,35 mb
prior v6 = 6,8,26,28,30,32 mb
yes it does include that stuff.
what kind of battery times where you getting on shabbykernel RC1
edit::: I corrected, should have said RC1
and what kind are you getting on ext4
which settings are you using with the supercharger .. I was just looking at it and was wondering what to use?
I got about 16-18 hours with RC1 and about 10-12 hours with your kernel.
I am using update9beta1
probably because you not setting the /data/99SuperCharger.sh
to run at boot and run as root
I am using update9beta1
I would agree so far battery has not been dramatically affected. If I am seeing a drop it is just a few hours, and I get over a day, that is heavier then normal use so far.
thats a pretty big drop in baterry time, are you setup exactly as you were on RC1
I wonder if other people are getting the same results, and if so, is the speed boost worth it
I would imagine that using link2sd will drain battery since it acceses the sdcard so much, are you using it now, and were you using it on RC1
How Do U Go About Pushing The Changed Up Files & Rom Frameworks, Fonts, Media, Etc That I Have Altered To Get Pushed EXT4 Partition Correctly????
Sending It Normally Through The Original Shabby.bat Will Not Work With The EXT4....
edit the bat file and look for lines like this
adb.exe shell mount -o remount,rw -t rfs /dev/stl12 /system
and change it to
adb.exe shell mount -o remount,rw -t auto /dev/stl12 /system
adb.exe shell mount -o remount,rw -t ext4 /dev/stl12 /system
What I did was change blood's 3.0 script as posted by hroark to work on ext4, then changed his theme info and added in the mods I wanted with the shabbymod, the only thing I wasn't able to do was remove the excess in shabbymod that I dont want, I did that manually before flashing bloods simple green3.0Ok I Tried Out The Rom. Kernel ETC. & It Runs Official & Very Stable Here...
But The Only Prob That Im Having Is How To Actually Push The Shabbymod To The Phone, When Using The New EXT4 Partition U Created....
Basically The Shabbymod Comes Pre-Installed On It & I Have Altered The Shabbyrom Up With Updated Apps I Use, Change Up The Fonts & Also Created My Own Theme To My Likings & Would Usually Push Them To The System Using The Shabby.bat Or Through ADB Commands.
How Do U Go About Pushing The Changed Up Files & Rom Frameworks, Fonts, Media, Etc That I Have Altered To Get Pushed EXT4 Partition Correctly????
Sending It Normally Through The Original Shabby.bat Will Not Work With The EXT4....
Part of the reason I get better battery is I keep sync off unless or until I need it.How do you get over a day?! The best I've gotten is about 18 hours with using gmail, a little internet and a few calls during the day.
I am using link2sd, but I was using that with RC1 also. I'll see how things go the next couple days, but the improvement in performance has been worth the decrease in battery life so far. Everything is much smoother, especially web pages.
I Had Actually Edited The .Bat File But Made A Mistake Where U Mentioned. Ill Def Try The Way U Posted.
Had It Like So:
here is the init.rc showing the ext4 file system and notice the royal v2 themed top bar
![]()
Ya, it works, and I think it works well. The reason I posted the pic (you know they are worth a 1000 wordsyes, i added those ext4 lines to the init.rc
it will try to mount rfs first, then try ext4, i probably could have did it as auto, but at the time I was unaware of the auto parameter
Ya, it works, and I think it works well. The reason I posted the pic (you know they are worth a 1000 words) is to show im actually on your set up and with the older theme. The way I did used bloodawn's theme flasher which worked very well I might add.
![]()
here is the init.rc showing the ext4 file system and notice the royal v2 themed top bar
![]()
what are you using to take images of your screen?
okay so i only found one line to edit in the bat file from rfs to auto, then i saved it and reflashed shabbymod with all my apks and even though i've done it several times it gets stuck at boost mobile...any suggestions?
What I did was change blood's 3.0 script as posted by hroark to work on ext4, then changed his theme info and added in the mods I wanted with the shabbymod, the only thing I wasn't able to do was remove the excess in shabbymod that I dont want, I did that manually before flashing bloods simple green3.0
okay so i only found one line to edit in the bat file from rfs to auto, then i saved it and reflashed shabbymod with all my apks and even though i've done it several times it gets stuck at boost mobile...any suggestions?
A more step by step that I did, by the way like hroark I hate writing so if grammer is bad dont say I didnt warn you.try using one of the theme scipts instead