• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Help SuperPad III Model: Android Tab10 Build FRF85B AV:v2.3 2011-09-19(001112)Kernel 2.6.32.9 #79

Yes I have 4 of them I got from the factory. I've been tryign to flash and upgrade the firmware with no luck.
 
I've been trying but noone answers posts. or offers simple help. Ive done all the things talked about mine won't boot to the sd card. just skips and loads orginal OS
 
bouoy said:
I've been trying but noone answers posts. or offers simple help. Ive done all the things talked about mine won't boot to the sd card. just skips and loads orginal OS
Click to expand...

That's probably because no-one has any info for you. The tab 10 is a very new release and there is zero support available for them (along with about 5 other new models that are surfacing now)

Contact the seller and ask them, but expect either no reply or that there is no other firmware available.
 
dart16 said:
That's probably because no-one has any info for you. The tab 10 is a very new release and there is zero support available for them (along with about 5 other new models that are surfacing now)

Contact the seller and ask them, but expect either no reply or that there is no other firmware available.
Click to expand...

yes probably but the question is : have another rom for a tablet with imapx200 , screen x600, armv6 , so i can try to port the firmware for our tablet :)
thx in advance
 
thel2dab said:
Hi.

I have this tablet and maybe of some assistance if someone is looking to
Port a custom rom.

Lee
Click to expand...


well i'm an htc desire hd modder, maybe i can try to port one of them for us :) but i have only a doubt........these firms are for tablets with the same technical speech???
 
famonaco said:
well i'm an htc desire hd modder, maybe i can try to port one of them for us :) but i have only a doubt........these firms are for tablets with the same technical speech???
Click to expand...

Yes I think one of the differences is that ours is a 9 volt and is a new model. Also while the about phone in settings says android 2.3 the build prop says android 2.2.

May its best we try and do some kind of nandrioid backup or obtain the manufacture firmware and try to incorporate some of the changes included in the other custom firmwares rather than trying to port a firmware not designed for our hardware.

Lee
 
or if our hardware is similar maybe its the way of tablet updates that's different and that's why it won't accept the other custom firmwares.

Lee
 
thel2dab said:
Yes I think one of the differences is that ours is a 9 volt and is a new model. Also while the about phone in settings says android 2.3 the build prop says android 2.2.

May its best we try and do some kind of nandrioid backup or obtain the manufacture firmware and try to incorporate some of the changes included in the other custom firmwares rather than trying to port a firmware not designed for our hardware.

Lee
Click to expand...

yes maybe is an idea but only our tablet is 9 volt??? yes our firm is android 2.2 , can u send an email to our manufacturer?
 
I have also Android tab10.

V2.3 2011-11-11 (001112)
2.6.32.9 root@wanghua-desktop #206
FRF85B

Everything works fine for now, there is no need for a new rom.

GPS Navigation works normally (Navigon 4.0.1, iGO-only in 960x, Copilot, Sygic) Google Maps, Latitude, but not Earth.

Android market works full (after some changes in settings, usual bug in superpads)

The device is rooted with z4root program like other Superpads.

Wifi, Lan and camera, youtube etc. are also fully functional :)
 
Snecer said:
I have also Android tab10.

V2.3 2011-11-11 (001112)
2.6.32.9 root@wanghua-desktop #206
FRF85B

Everything works fine for now, there is no need for a new rom.

GPS Navigation works normally (Navigon 4.0.1, iGO-only in 960x, Copilot, Sygic) Google Maps, Latitude, but not Earth.

Android market works full (after some changes in settings, usual bug in superpads)

The device is rooted with z4root program like other Superpads.

Wifi, Lan and camera, youtube etc. are also fully functional :)
Click to expand...


very nice, can u post this firmware????
thx in advance
 
acgreen said:
Tim6a or FunnyComb will not work on the Superpad III aka 9v Flytouch 3 clones. You need a Disco10 unit. Anything else will no run these wonderful roms.
Click to expand...


porting a firmware from another pad with the same caratheristic isn't so hard but i'm new with tablet....not android rom :D so i'm trying a firm for another pad with the same caratheristics of our tablets :)
cheers
 
famonaco said:
Android Tab10
Build FRF85B
AV:v2.3 2011-09-19(001112)
Kernel 2.6.32.9 #79
arm 6
hwr imapx200
screen x600


merry christmas guys
Click to expand...

I did the same in post #15 :)
The screen resolution is 1024x600, but I dont know about the cpu type, must be the same as yours.
 
You must log in or register to reply here.
Back
Top Bottom