• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [ROM][ALPHA] CyanogenMod 10 for the LG Connect 4G MS840

Yes. Weren't you having a problem with lost service? The VV3 will hopefully restore that, and yeah flash your CM10. You will need to run root and CWM exploit again, firmware update will wipe both out.
 
Aaalright. So here come the pics =)

1. Showing that i have signal with LTE
2. Showing that i have signal with CDMA (and still 1x)
3. Proof of being able to download something (with Speednet being the test dummy
4. My results from speednet (btw, i changed back and forth from CDMA to LTE to evdo and what not, they were all staying in the same range speeds, ssooo i dont think its really changing from LTE to CDMA...)
5. Just a btw, im still not able download from the link you provided PG =/
6. Haha just a small typo on your OP :p unless.... everything IS working??? :p

What rom did you come from before you flashed to the cm10 update issued on the 17th?
Also, are you currently (when you took the screenshots) within a 4g area? If you are, (and if not) did you try using a 4g enabler, or setting it to LTE with something other than the cyanogen settings?
(Elixir Widgets has a tool that could let you do this.)
I'm just going through ways to troubleshoot, and having as much information as possible will assist us with pinpointing exactly what's going "wrong" here.

Thanks for any info you have, and I look forward to seeing what comes of it.
 
Yes. Weren't you having a problem with lost service? The VV3 will hopefully restore that, and yeah flash your CM10. You will need to run root and CWM exploit again, firmware update will wipe both out.

Awesome, thanks for the answers. One last thing, I am stuck at the MetroPCS boot screen, it just keeps looping. This is immediately after flashing vv3.

Just going to flash vv3 again and see if that fixes it.
 
ok, so i am flashing vv3 now. So do i then reroot and then install CM10?

I feel so bad for all the questions.

You may want to try VV3 out for a couple before flashing CM10. VV3 is a bit more zippy and smooth than the ZV* firmware, some are saying the signal and data connection are way better because of updated baseband. You may like it better than a ZVA based ROM ;)
 
Aaalright. So here come the pics =)

1. Showing that i have signal with LTE
2. Showing that i have signal with CDMA (and still 1x)
3. Proof of being able to download something (with Speednet being the test dummy
4. My results from speednet (btw, i changed back and forth from CDMA to LTE to evdo and what not, they were all staying in the same range speeds, ssooo i dont think its really changing from LTE to CDMA...)
5. Just a btw, im still not able download from the link you provided PG =/
6. Haha just a small typo on your OP :p unless.... everything IS working??? :p



Weird thing is, i lose signal when i lock the phone..... i unlock it, i wait a few secs or i change the settings and its back...?
you trying to dl from the phone or pc?? If from the phone try using wifi to dl. ;)

Awesome, thanks for the answers. One last thing, I am stuck at the MetroPCS boot screen, it just keeps looping. This is immediately after flashing vv3.
wipe data ;)
 
you trying to dl from the phone or pc?? If from the phone try using wifi to dl. ;)

From the phone, and wifi does work for me, i was just trying to demonstrate that my data is working and able to download :p

Edit: aaannddd i lost signal... this thing is haywire, ive been trying to get it back changing back and forth from all the friggin signal combos and nothing ! So Dracconus, i cant really test that out yet...

Edit 2: aaannddd its back haha. So weird... Alright I am in a 4G area cause i was getting 4g signal on Rom #2 v 1.8, im gonna try out turning on LTE through a widget or something. And btw, my data is working with Data enabled, Network Mode on LTE/CDMA and System Select on Automatic (as opposed to Home Only)
 
From the phone, and wifi does work for me, i was just trying to demonstrate that my data is working and able to download :p

Edit: aaannddd i lost signal... this thing is haywire, ive been trying to get it back changing back and forth from all the friggin signal combos and nothing ! So Dracconus, i cant really test that out yet...

It's perfectly fine. I had the same issue pretty much, it wouldn't drop intermittently as far as I noticed, but then again I was changing a lot of stuff in it pretty rapidly upon download, so I'm not entirely sure of that statements validity.
I look forward to an answer when you can provide one; no rush at all.
I'm just asking because the more information we receive on what people were using the more we can try to figure out exactly what's going on, ya'know.
 
Remove battery. Reinstall it, press and hold PWR and Vol- buttons until LG recovery pops up. Follow prompts, let it recover, should reboot itself and be fine.

Thanks a million, that worked like a charm. I think I am going to try VV3 out for a while. I kept having reboot issues on Black Plague which is why i wanted to try out CM10. And i honestly loved CM10. But i kind of need my mobile network, and it would be nice to have DATA working too. AWESOME AWESOME. Thanks so much. Now i can start setting up my phone.

Can't wait for a stable CM10 though. Really excited. BTW. I would love to donate.
Can anyone give me the link please.
 
Thanks a million, that worked like a charm. I think I am going to try VV3 out for a while. I kept having reboot issues on Black Plague which is why i wanted to try out CM10. And i honestly loved CM10. But i kind of need my mobile network, and it would be nice to have DATA working too. AWESOME AWESOME. Thanks so much. Now i can start setting up my phone.

my largest issue with BP was that after my battery hit 15% I had to let it completely discharge in order for it to charge properly. If I let it get to 14%, and charged it, it would either stay at 14%, or it would just discharge, and then redo the process.
Also the battery life on it wasn't that great at all. I wasn't really too impressed with it, but I didn't need to switch to anything else at the time.
I still can't believe how abruptly these batteries die on this phone, it's really depressing to see a 3500mah battery go dead after 3 hours of GPS, or 5 hours of streaming music. (and that's with the lowest core setting at 192 on conservative...
 
my largest issue with BP was that after my battery hit 15% I had to let it completely discharge in order for it to charge properly. If I let it get to 14%, and charged it, it would either stay at 14%, or it would just discharge, and then redo the process.
Also the battery life on it wasn't that great at all. I wasn't really too impressed with it, but I didn't need to switch to anything else at the time.
I still can't believe how abruptly these batteries die on this phone, it's really depressing to see a 3500mah battery go dead after 3 hours of GPS, or 5 hours of streaming music. (and that's with the lowest core setting at 192 on conservative...

3500? mine came with a stock 1500Mah
 
yeah i cant test it... i keep losing the signal. Sorry guys =/ its got a mind of its own. Ill edit this post to let you guys know if my recovery goes well or to hell haha

Edit: Did a recovery and once again all good =) same procedure as before. Changed my settings in CM10 to LTE/ CDMA/ Evdo, enabled mobile data, went to recovery, Wiped only Cache on CWM and just restored my back up with 4G running
 
Aaalright. So here come the pics =)

1. Showing that i have signal with LTE
2. Showing that i have signal with CDMA (and still 1x)
3. Proof of being able to download something (with Speednet being the test dummy
4. My results from speednet (btw, i changed back and forth from CDMA to LTE to evdo and what not, they were all staying in the same range speeds, ssooo i dont think its really changing from LTE to CDMA...)
5. Just a btw, im still not able download from the link you provided PG =/
6. Haha just a small typo on your OP :p unless.... everything IS working??? :p



Weird thing is, i lose signal when i lock the phone..... i unlock it, i wait a few secs or i change the settings and its back...?

Awesome, thanks for the answers. One last thing, I am stuck at the MetroPCS boot screen, it just keeps looping. This is immediately after flashing vv3.

Just going to flash vv3 again and see if that fixes it.

Thanks a million, that worked like a charm. I think I am going to try VV3 out for a while. I kept having reboot issues on Black Plague which is why i wanted to try out CM10. And i honestly loved CM10. But i kind of need my mobile network, and it would be nice to have DATA working too. AWESOME AWESOME. Thanks so much. Now i can start setting up my phone.

Can't wait for a stable CM10 though. Really excited. BTW. I would love to donate.
Can anyone give me the link please.
I meant how you were trying to dl the zip lol

link is in my sig and on the wiki and should be in the op. ;)
 
Aaalright. So here come the pics =)

1. Showing that i have signal with LTE
2. Showing that i have signal with CDMA (and still 1x)
3. Proof of being able to download something (with Speednet being the test dummy
4. My results from speednet (btw, i changed back and forth from CDMA to LTE to evdo and what not, they were all staying in the same range speeds, ssooo i dont think its really changing from LTE to CDMA...)
5. Just a btw, im still not able download from the link you provided PG =/
6. Haha just a small typo on your OP :p unless.... everything IS working??? :p



Weird thing is, i lose signal when i lock the phone..... i unlock it, i wait a few secs or i change the settings and its back...?

Damn, I don't get those speeds even with my 4G running :D That's pretty impressive for 1x/3g LOL... Hey Lito, what exact settings did you apply to get data going? Or did it just start working on it's own after sitting a few minutes?

Isn't your signal indicator supposed to be blue instead of grey? Wonder if that means anything despite being connected to services...

EDIT--- Disregard, LOLOL. you already told us a couple of posts up ^^^ Sorry :D
 
Hi guys, im new around these parts.. idk if this was already mentioned but i just installed this rom to test it out and it says the process com.andriod.phone has stopped, any idea on how to fix this?
 
Hi guys, im new around these parts.. idk if this was already mentioned but i just installed this rom to test it out and it says the process com.andriod.phone has stopped, any idea on how to fix this?

Did that come up on initial boot, or after opening something? Try rebooting the phone. If it still comes up with that, re-download and/or re-flash the ROM.
 
Did that come up on initial boot, or after opening something? Try rebooting the phone. If it still comes up with that, re-download and/or re-flash the ROM.

it came up on initial boot, I didnt have time to do anything. I tried rebooting and same thing happens, gonna try to re download
 
WIPE DATA with Clockwork before you flash CM10. That's probably why you are getting a com.android error. You're the first I've seen to come up with that.

I did do that before installing it, but what i did to fix it was to restore the backup and then re install the rom without wiping data and then wiping data with the rom, that fixed it
 
Back
Top Bottom